Jump to content
Blue Delta

94' Toro Wheelhorse 416-H Mild Resto/Clean

By Blue Delta, in Restorations, Modifications, & Customizations

Recommended Posts

tom2p    2,393

tom2p
Posted

try Mother's Mag and Aluminum polish on the hub caps 

 

one of the better (if not best) mild abrasive polishes I've used - and especially for chrome restoration 

 

Share this post

Link to post
Share on other sites
 

cleat    4,984

cleat
Posted

And also, use aluminum foil to rub in the chrome polish. It really polishes well even on pitted chrome.

 

Then give it a couple of coats of automotive wax to protect and shine even more.

 

Share this post

Link to post
Share on other sites
 

Blue Delta    35

Blue Delta
Posted
2 hours ago, cleat said:

And also, use aluminum foil to rub in the chrome polish. It really polishes well even on pitted chrome.

 

Then give it a couple of coats of automotive wax to protect and shine even more.

 

Yeah, I have done the aluminium foil on the chrome (which works amazing) but the chrome has failed unfortunately the foil isn’t abrasive enough to move it but anything more abrasive will ruin the remaining chrome - hub caps I see are rare already, let alone in Australia where these steeds are practically nonexistent. 

 

Paint wise it has aged into almost three shades with it being under artificial light it is the most pronounced. In the sun it looks good, I would say it is an honest horse.

  • Heart 1

Share this post

Link to post
Share on other sites
 

William07    0

William07
Posted

This is a great story about the 416 H restoration and such a neat job completed by delta blue.  There was one of these for sale in Ipswich recently.  I am nearing 70 years and still pushing my rover mulcher on a half acre easement block. I also do the side on my neighbours as he now suffers from Parkinson's plus he is a great neighbour.  When I look newer ride on mowers like Cox and Greenfield, they seem to have gone backwards in quality and build. I am presently looking to a older Greenfield fastcut 2 which is a twin and may be ok, but the quality does seem to lack.  So if anyone has knowledge of one of the ones like Delta restored, then I am also up for a restoration of a 416.  Best of the.day to all.

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • lsc1257
      1996 Wheel Horse 520H With 48 Inch Deck
      By lsc1257
      I have a 1996 520H Wheel Horse for sale.  The tractor has just over 800 hours on it.  It comes with a 48 inch deck.  The deck is a 1995 and has over 1,500 hours on it, as it came brand new with my 312-8 that I sold several years ago.  This 520-H has the swept front axle so it can handle a 60 inch deck.  I just replaced the battery and the deck belt this summer.  The engine is a 20HP Onan and it starts right up but requires the full choke.  The transmission is an Eaton 1100-062, hydrostatic.  The deck is in rough shape but the spindles appear to be in good working order.  The right rear tire has some cracking.  The original operator's manual for the 520H is included, as is the original operating and maintenance instructions for the deck, plus the installation instructions for the deck.  Also included is a new PTO belt and several miscellaneous deck wheels and rollers.  Additional pictures available upon request.  Asking $500.



    • Joe Warren
      Onan model BF-MS2425A Engine
      By Joe Warren
      Onan model BF-MS2425A Engine for parts. This engine pulled from NOS Bolens QT16 tractor that sat for 40+ years. Engine has less than 25 hours on it. Engine currently stuck. Local pick up in  Easton  MA.  $49  or offer.
       




    • Joe Warren
      Service Tool Kit, Onan, ON-420-0556
      By Joe Warren
      Wheel Horse
      Service Tool Kit
      Onan Industrial Engines
      ON-420-0556
       
      Kit is missing oil filter tool, otherwise complete. Tools in excellent condition. Small crack in plastic case, bottom, middle. 
       
      $129 plus shipping cost.
       
      Message me if you are interested in purchasing. Thank you. Joe


    • TonyI
      Hydro lost pulling power
      By TonyI
      I have a 418-c  worked great plowing over the winter.. but now is having no power pulling a load fwd.
      replaced the fluid.. the old fluid didn't look bad. feels a littls better., but still significant loss of power and high pitched whine coming out of the hydro.  the lift works fine
       
      is there a repair manual our there for the hydro?  Is there a way to reverse flush the system?   I hear sometimes the hoses crack internally and clog things up.
    • mattd860
      Complete Pedal Kits for Hydrostatic Wheelhorse / Toro Tractors
      By mattd860
      I have developed a kit that allows a Wheel Horse / Toro hydrostatic tractor to be operated by a pedal on the right side of the tractor. The original forward/reverse lever can be retained or removed. The kit includes everything needed to install the pedal kit and installation is simple with the help of a downloadable installation manual. Additionally, only one (1) 1/4" hole will need to be drilled which can be done by a hand drill. No other drilling or cutting will be necessary. Any tractor with this kit can be converted back to stock without any visible evidence that kit was installed. However, you'll never want to do that

      The kit operates very simply and similar to modern tractors. When the pedal is pushed forwards the tractor will move forwards. When the reverse pedal is pressed downwards, the tractor will moved in reverse. If the operator takes his foot of the pedal at any time, the pedal will automatically center itself and the hydrostatic transmission will return to neutral (stop). This enables the operator to use both hands on the steering wheel or one hand on the wheel and the other operating an attachment like a snow blower, plow, etc.

      The foot pedal is custom cast in Aluminum, uses brass bushings to minimize wear, and it closely matches the OEM Wheel Horse BRAKE pedal commonly found on 8-speed manual transmission tractors. Modifications were done to the pedal to add the reverse pedal and adapt the pedal to the rest of the kit. For the most part, the pedal looks like it was designed and manufactured by Wheel Horse / Toro. Additionally, a grease fitting has been adapted to the pedal to further minimize wear and tear and if the brass bushings ever wear out they are fully replaceable without having to buy a whole new pedal. 

      The pedal kit fits the following series tractors with Eaton hydrostatic transmissions: C-1X5, 300, 400, 500. 
       
      My kit can be adapted to older hydrostatic tractors with the Sundstrand transmission, however, you will need to find an updated hydro cam commonly found on ebay. Message me for more information. 
       
      Here is a link where you can download the installation manual: CLICK HERE
       
      I am selling these kits for $330 shipped to anywhere in the United States. I offer multi order discounts as well. I will also sell to other countries for additional shipping charges to be determined.
       
      If anyone has any questions please feel free to PM me or post your question here and I will be glad to help. Or you can email me at mattdarling02@hotmail.com.

      Thanks!
       
       
      Below are pictures of the complete kit and the pedal installed on the tractor. Some modifications have been made since these pictures were taken. For example, the reverse pedal is now cast in aluminum instead of the steel pedal shown below. 
       

       

       

       

       

       
×
×
  • Create New...