Jump to content
DownHome

My 2nd Wheel Horse in 3 days

By DownHome, in Wheel Horse Tractors

Recommended Posts

DownHome    40

DownHome
Posted

So as I previously mentioned I purchased a 1965 855 this past Saturday. I've begun the tune up on the 8hp Kohler. This little tractor seems to be in good shape, came with a mower deck and a plow. The metal is in great shape, no rust and only 1 modification that I can tell. The addition of goofy plowing head lights. The transmission is a Uni-drive 3 speed and seems to be in good working order. As mentioned I have begun the tune up on the engine. I believe I can have this up and running in fairly short order.  After hearing about my recent purchase my Grandfather has given me his 1964 1054 10Hp. It is a bit rougher but this has sentimental value as it was the tractor I remember from my childhood. Right now nothing is working on it. He parked it once the transmission failed. I just started on the 855 restoration and now I'm torn as to what to do with the 1054? The engine work doesn't concern me as much as the bad tranny on the 1054. I've started down this road because I have 6 young children who like to do things with their hands and I thought this would make an excellent project. Do i juggle both? Focus on the 855? Sell the 1054? What to do what to do? I've attached pictures of both.

WH855.jpg

WH1054.jpg

  • Like 11

Share this post

Link to post
Share on other sites
 

grine_22    145

grine_22
Posted

You can never have enough projects.  Maybe someday down the road the kids will remember working on it with you. 

  • Like 5

Share this post

Link to post
Share on other sites
 

ronhatch    407

ronhatch
Posted

I'm a big believer in finishing one project before starting another. I've seen guys have so many things started but nothing is ever finished and they end up with a garage and/or a yard full of junk.. I would do the 855 project first because it is easier and then tackle the more difficult and time consuming 1054

  • Like 6

Share this post

Link to post
Share on other sites
 

Pollack Pete    2,273

Pollack Pete
Posted

Keep 'em both.The 1054 is pricless due to the sentimental value.I have a tranny out of a 1054 or 953.A year ago I had a guy interested in buying it.I pulled it out of the tractor and he must have been kidnapped or abducted by aliens.Never heard from him since.It's on the scrap pile right now.I'll sell it cheap,but ya gotta come get it. 

  • Like 6

Share this post

Link to post
Share on other sites
 

AMC RULES    37,225

AMC RULES
Posted

Can never have too many :wh: projects...

keep 'em both, of course.      :handgestures-thumbsup:

  • Like 1

Share this post

Link to post
Share on other sites
 

SPINJIM    1,986

SPINJIM
Posted

I like to have at least two projects working.  That way, while I'm waiting for parts for one project, I can switch over to the other.  Sometimes you have to wait months for a rare part to show up on ebay or somewhere else.   No sense in not working on another WH while you're waiting.   

 

Looks like you have two very worthwhile projects.  Good luck.

  • Like 4

Share this post

Link to post
Share on other sites
 

WHX??    52,690

WHX??
Posted

No brainer...keep them both!

5 hours ago, Pollack Pete said:

It's on the scrap pile right now

I'd thought swearing and blasphemy were against the rules here Pete.... shame on you:angry-nono:....one man's scrap is another man's horse!!!:ychain: awfull nice of you to offer him it!

 

BTW DownHome..... :text-welcomeconfetti:to :rs:

  • Like 2

Share this post

Link to post
Share on other sites
 

Wheelin'theSky    57

Wheelin'theSky
Posted

It would be fun to work on "great" Grandpa's machine with the kids. Looks like the 855 is closer though.

As long as you have space for them, I'd keep them both as well.

Looks like you are already finding parts for the restos!

  • Like 1

Share this post

Link to post
Share on other sites
 

Phil854    130

Phil854
Posted

You gotta keep the one from you grandpa  I would keep them both you have 6 kids gotta have six tractors  wait I have 2 kids and 5 tractors don't tell my wife!!!!

  • Like 2

Share this post

Link to post
Share on other sites
 

stevasaurus    23,427

stevasaurus
Posted

That trans on the 1054 is no big deal.  If you can do engine work, you can either fix this trans, or put another one on.  the 1054 has a 5047 trans on it.  This is the infamous bevel gear differential.  I think RacinFool40 (Mike) has the parts for this trans...if not...replace it with a regular 3 speed uni-dive.  Odds are it is the differential that needs rebuilding.  :)

  • Like 2

Share this post

Link to post
Share on other sites
 

SylvanLakeWH    29,171

SylvanLakeWH
Posted

Six helpers - "Free"

Two WH's - "Chump Change"

Memories....Priceless!

  • Like 5

Share this post

Link to post
Share on other sites
 

can whlvr    994

can whlvr
Posted

I willchime in too,you would never be able to replace your grandpa machine,if it were me id never get rid of iy,what ever it takes,and maybe stick with one rebuild at a time,the tranny is no problem to repair or replace,as you see you already have an offer for one,and theres tonsof expertice here,steveasauras has some great videos on how to open them up and rebuild them,id keep it you wont regret it

  • Like 1

Share this post

Link to post
Share on other sites
 

Martin    2,133

Martin
Posted

Just make sure if you do replace the 1054 trans with a regular 3 speed unidrive, that you swap the 1054 specific axles and hubs, (and whatever else inside that is different). The 953, 1054 (5047 trans) is an animal almost all of its own, compared to the considerable amount of other 3 speed unidrive models.

  • Like 2

Share this post

Link to post
Share on other sites
 

Aldon    4,828

Aldon
Posted

Well I am headed to big show in June. If you want to take Pete up on his offer of a tranny, I believe Pete is in my neck of the woods and I can slide over and grab it and bring it to the show. 

  • Like 3

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • 2003Chevy
      ADDED Three at Once! (2x 854 1x 855)
      By 2003Chevy
      Hello All!
       
      Added THREE tractors all at once yesterday(09/16/2025).  Two model 854, and one model 855.  The two 854 look pretty nice, but are not running right this minute  --does not look like much more than a little tinkering/refreshing after sitting for a long time.  The 855 was labelled a "parts" tractor, but except for it being Really well-used looking, it seems to be all there so I am not going to consider it out of play yet.  The two 854's have rear discharge mower  decks...one is a square style deck, the other the rounded style deck.
       
      I think it is really nice that all three are basically the same machine, separated by one year, yet completely different styles--the end of one era and the beginning of another I guess.
       
      There is an ID tag on the 855 (serial number 135166) but on the two 854 tractors, there is No tag under the steering like late models.  Are the tags in a different place on older machines?  Looking them over, I do not notice anything obvious.  The 854 with the lower Kohler engine serial number has the round style mover deck, while the one with the slightly higher engine serial number has the square style deck.
       
      All for now!  Be well and stay safe.
       
      [rayg]
       
       
       
       
       
       
       
       





    • Donavon1
      Engine for my 1054 (black Betty)
      By Donavon1
      Need some help deciding on a brand of engine to buy for my 1054. (Needs to be a diesel 10 hp+) I’m refining used motor oil/cooking oil for fuel for it. So it will have to have an option to run used oil and diesel 
    • WH1618speed
      WH 855 with 42" Blade
      By WH1618speed
      1965 Wheel Horse 855 with 42" blade and chains 
       
      Runs good
      Sheet metal is very straight, great candidate for restoration. 
      Missing Belt guard 
      Will sell tractor by itself for $500 without blade and chains 
      Blade is straight and lots of cutting edge left... just a little rusty. 
       
      Text, call, or email with any questions. If you call and I don't answer please leave a voicemail with your name and number. Thanks!
       
      I can also deliver to the big show in Arendtsville, PA... IF you prepay. 
       
      Facebook Marketplace link with more pics: https://www.facebook.com/marketplace/item/598023068755689?rid=229092436403311&ad_id&rt=1&refID=0&refType=0&referral_code=commerce_attachment
       
       

    • Pullstart
      5 big wheels
      By Pullstart
      5 big wheels, in various forms or stages.  One with melted wiring, one runner, one in need of an engine, one full project and one in the middle of nap time.  @953 nut thanks again for turning on my big wheel switch!

    • Pullstart
      Oops, it Happened Again!
      By Pullstart
      So, this kind of was destined to show up, I guess.  My wife found it a while back and was trying to buy it for me for our anniversary, but I was already in the middle of helping @Bow_Extreme get a deal on it!  Well, come to find out, he called looking to possible unload it.  SOLD SOLD SOLD!  The color is odd, but it adds character.  I think it’ll stay.  I’m thinking this might show up to Uncle Jim’s Plow day, snowblower engine and all to work the field!
       
       



×
×
  • Create New...