Jump to content
johnidi

Plow for 523Dxi

By johnidi, in Wheel Horse Tractors

Recommended Posts

johnidi    2

johnidi
Posted

Hoping someone can help answer this question. I Have a 523Dxi and I'mm looking for a plow/blade. I found this item for sale and told it came off a wheel horse commando 800 large frame. Would this fit my Wheel horse? Or do you have another suggestion.

 

Thanks

Plow.jpg

Share this post

Link to post
Share on other sites
 

WNYPCRepair    1,923

WNYPCRepair
Posted

The only attachments that will fit an XI model (without fabricating a new mount) are XI attachments. The mounting system is different, and length/width of the tractor is different. If you can find a frame for an xi, the blade from a 300, 400, or 500 series will go on the frame. 

 

 

  • Like 1

Share this post

Link to post
Share on other sites
 

johnidi    2

johnidi
Posted

Good to know. Thanks for the feedback.

Share this post

Link to post
Share on other sites
 

shallowwatersailor    3,214

shallowwatersailor
Posted

The attachments for the 5xi series are specific to this model. The 5xi is a longer, larger tractor with: a front-mount PTO as opposed to the Classic Wheel Horse side-mount; wider frame so the Attach-A-Matics' mounting points are further apart; a different hanger arrangement for the mower decks; and a longer wheelbase with a swept forward axle for sectoring a blade . Because of this they usually command a higher price. The 5xi attachments only show up once in a while compared to Wheel Horse attachments like you found, but not to say that they are not out there and it may take some time to find them. The good thing is that it appears that the majority of these tractors were sold east of the Mississippi.

 

A dozer/snow blade could be reworked from another model but some fabricating would be needed. A better choice to start with would be a 48" blade intended for a late 520-H.

  • Like 3

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • DeltaNu1142
      4' plow and 48" deck/blower/bagger for Toro WH 5xi
      By DeltaNu1142
      I bought a 5xi package yesterday including some attachments I'm not going to need:
      4' plow, model # 79355 - in great condition, very minor surface rust on crossmember and back side of blade. $250 48" mower deck with blower and bagger - in good condition, working when removed from tractor yesterday. Previous owner said it never clogged on him. Some surface rust on deck and one 2" hole near the center. $300.  
      I'm open to offers and interested in trades! I'm looking for a 2-stage snow thrower, p/n 79366. Maybe tools, etc.
       
      Available for pickup--let me know if you have any questions. Thanks!





       
      Here's a photo of the deck that's included. It's got some rust holes, but functions perfectly. Most of the price here is wrapped up in the blower & bagger:
       

    • Bbo44
      2004 520xi and Plows
      By Bbo44
      SOLD SOLD 520xi with air cooled 20hp Kohler - tractor in great shape and solid. Everything works. Engine was removed a few years ago and cleaned of grass buildup. New head gaskets and PTO seal a few years ago. Engine showed a decent amount of wear but runs strong and fires right up. Didn’t like the wear and needed a zero turn for my property. Would not hesitate to mow with it right now. 1200 hours. Have original paperwork. New air filter, fuel filter, fresh oil & filter. It’s been mowing 3+ acres for 20 years.

      52” side discharge deck complete. Currently mounted on the 520xi- solid, welded/patched cracks and holes. Front roller broken and patched, newer belt. Was just removed and cleaned. Welded chips in blades, but never finished sharpening. Solid deck, decent life left.

      48” wheel horse complete plow for 520xi 79355. Was used for snow. In great shape.

      48” wheel horse plow incomplete for 300 series garden tractor. Was used for parts. Not sure what it is missing but what’s there is very solid.

      MUST TAKE ALL. WILL NOT SEPERATE. Won’t answer if you ask. $750 CASH for everything. Only thing I’d consider selling separate is the 48” incomplete plow for 300 series. Will not deliver.
       

    • Donavon
      Wheel horse 1054
      By Donavon
      Need ideas to convert my 1054 A Frame plow into a snow blower
      Any idea's?
    • RJ Hamner
      Will it fit?
      By RJ Hamner
      Will the plow I am using on my C121 and C160 work on a 876?  
      or is the plow frame different?
      Thanks
      Bob
    • Nuzmuz
      Rear Mounting Bracket Mod for Tiller and Plow
      By Nuzmuz
      Just wanted to show a modification I did to my 1990 310-8. I recently picked up a 36” tiller for my horse and I tried it out on my new garden area. After hitting a rock, it knocked one of the axle brackets open dropping the right side of the tiller. On a manual I viewed, it had clevis pins to hold the lever in, but my bracket did not have them. I drilled a 1/4” hole through on each lever and mounted a 1/4” clevis pin and hairpin cotter to reinforce the lever. I read on another post to just tighten the bolts on the levers, but I think this will work a little better. Hope this helps someone!



×
×
  • Create New...