Jump to content
tommyg

Kohler Engine Suddenly Loses Power

By tommyg, in Engines

Recommended Posts

tommyg    157

tommyg
Posted

Cutting the grass with my Kohler powered D-180 this afternoon when all of a sudden, it sounded like I hit something with the blade. The engine really seemed like it was straining to spin the blades, so I quickly pulled back on the pto. It seemed to run fine and nothing was bound up under the deck. Every time I tried to re-engage the pto, it would bog down. Decided to bring it back to the garage to take a closer look. The engine was straining even to move the tractor at high speed, but otherwise ran OK. When I got to the garage, I shut it down and double checked spark plug cables to make sure they were secure. Then for some reason, placed my hand near the exhaust on the right side and there was virtually no exhaust coming out. Could I have broken a rod? I've been noticing a tapping sound for a long time, but it's been getting seemingly worse lately. But it would go away at high RPM's, so I wasn't too concerned thinking it might just be a valve clearance issue. Now I'm thinking it might have been a warning sign. What do  you guys think?

Share this post

Link to post
Share on other sites
 

953 nut    68,597

953 nut
Posted
Tapping sound never lead to good things. Sorry to say it is time to pull the plugs and check for compression.

Share this post

Link to post
Share on other sites
 

tommyg    157

tommyg
Posted (edited)

Absolutely no compression on the right cylinder.

Edited by tommyg

Share this post

Link to post
Share on other sites
 

pacer    3,180

pacer
Posted

Likely a rod came apart:eek: After hearing a tapping noise and then you dont feel any exhaust that likely means the piston aint moving.

Now for the really bad news! parts for that 18hp are scarce as hens teeth. I'm just finishing up a D-200 and needed a rod and scoured the net for days and days when suddenly one popped up on the bay - whew! Piston and rings will interchange from a K-301 (I'm pretty sure) on my K-532 I'm using piston/rings from a K-321, but head gaskets wont interchange and they too are hard to find. Gaskets and rods will interchange from the K-482, K-532 and the K-582.

  • Like 2

Share this post

Link to post
Share on other sites
 

tommyg    157

tommyg
Posted

Great. This is work I'm not even going to attempt. I've got a guy locally that's really good at rebuilding these things. I've gotta hope he's got some options for me.

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • BuffaloD200
      Ark Loader Spool Valve
      By BuffaloD200
      Finally getting around to working on my ark loader.  The previous owner said he thinks the problem is with the spool valve.  
      As I've learned a bit more about hydraulics now, I'd like to get this all sorted out.  
      I noticed the power beyond port is connected to the reservoir return.  Is that right?  
      Anyone see anything blatantly incorrect?



    • ccs002
      D-160 Hydro Pump
      By ccs002
      Looking for a complete hydro pump for a D-160. Tractor is missing everything from the rubber coupler disc back. Also willing to buy a complete tractor for parts, the closer to Harrisonburg VA the better. Thank you. 
    • tractorboy79
      GT14/D series lift cylinder modification
      By tractorboy79
      I was looking around on ebay and noticed that hydraulic actuators from John Deere 312, 317, etc models appear to be Identical to a Gt14 or d series lift cylinder. My question is would a new cylinder from ebay be able to replace one that is on a gt14 or d series?
       
      Images below of cylinders to show similaritys.


    • BuffaloD200
      HELP! D-Series Clutch
      By BuffaloD200
      '74 D-180
       
      My friction disc in gone on my clutch.  I saw the old post about making a new friction disc, so I'm not concerned about that.
      I managed to remove the front clutch plate and double v-belt pulley.  But I can't separate the two.  When I took the assembly off the spiraloc washer popped off on its own.  I HAVE READ THE MANUALS.
      So I should be able to just remove the pulley from the front clutch and continue with step 4.  The v-belt pulley is loose as all hell and flops around like a dead fish.  It seems to be hung up on a ring or bearing race.  
      So my thoughts are grab a BFH or sparky the blue tip wrench.
      Is there an unpublished step 3.5, or some trick?
    • BuffaloD200
      D-Series One Wheel Peel
      By BuffaloD200
      Hey all, 
       
      My '74 D180 has a lot of trouble pushing snow.  Weighted tires, but nothing else at this time.  I've found it gets stuck frequently and only one wheel spins.  Do these tractors not have a limited slip/locker arrangement?  How does everyone manage with the infamous one wheel peel?
×
×
  • Create New...