Jump to content
jeff w

Drive Belt C-81

By jeff w, in Engines

Recommended Posts

jeff w    4

jeff w
Posted

Need a new drive belt for my C-81. The process looks pretty much straight forward, but, experienced opinions can be very helpful. After looking at the PTO, should I remove that to do this correctly? Or just take bracket and pto lever off to facilitate removal? Thank you.post-12612-0-43146900-1418690370_thumb.j

Share this post

Link to post
Share on other sites
 

rmaynard    14,930

rmaynard
Posted (edited)

1. Remove the clutch rod from the top.

2. Pull the PTO pin and swing the hoop to the front.

3. Remove the belt going to the mule drive.

post-2221-0-94346200-1418694889.jpg

Edited by rmaynard

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • drewd
      Workhorse 1971 or 72
      By drewd
      Hi All,  I have a 71 or 72 Model # 101006, Serial # 790336.  Model number chart says 71 but the paper for the engine has a print code 72.  The closest I could find was for models 1-3745 & 1-3741.
      Two questions.  I finally need to replace the drive belt.  This manual list the belt as # 1576. 
      Two questions:
      1)  Does anyone know what size that translates to?  I do have the old belt but the inside edge is falling apart so it will measure a little longer than it should.
      2) This tractor has the electric clutch.  What is the best way to remove the belt?
       
      As always...Thanks!
    • Mike Compton
      1969 drive belt pic / diagram
      By Mike Compton
      Hi there, sorry if this is a repeat question.  Anyone have a pic or diagram of how to reassemble the pulleys / tensioner, and how to route the belt?  One more...what are the 4 holes for at the rear of the seat deck (above the logo decal)?
      Cheers, 
      Mike 


    • Reeferred
      Drive belts
      By Reeferred
      Need help,. 244-h model 72041 newer. The drive belt keeps coming off is it to lose, to tight? Any ideas would be great 
       
       
    • midpack
      So... now in confused
      By midpack
      I had a drive belt let go on a 1980 C-175 Sundstrand hydro. After searching the manuals it looks like either an 83" or an 85 1/2" belt is called for. 
      Anyone know the right length off the top of their head?
      Thanks 
    • dambur
      208-4 Changing Drive Belt
      By dambur
      I need to change the Drive Belt on my Wheel Horse 208-4SB Model 42-08B401.  I really need some step by step instructions or a service manual. I can't seem to find the procedure anywhere.  PIctures would be great.  My mower is slow going forward and It was suggested to me to change the drive belt.
       
      Thanks
×
×
  • Create New...