Jump to content
hamhinge

Original cub no serial #

By hamhinge, in other brands

Recommended Posts

hamhinge    0

hamhinge
Posted

This is my first post I have read alot of good stuff on here I own some wheel horses and cubs I pick up my 2nd original cub a week ago My first cub was born late 1962 by the serial # The other cub has no serial # stamp on it  It is stamp clear on the first one and I have clean the paint off but nothing just trying to find out something about thispost-6178-0-20783300-1406430394.jpgpost-6178-0-19852500-1406430444.jpgpost-6178-0-53404400-1406430503.jpgpost-6178-0-10899000-1406430548.jpgpost-6178-0-83246100-1406430608.jpg

Share this post

Link to post
Share on other sites
 
 

Jerry77    1,218

Jerry77
Posted

I had a 62 cub also - kept it for 20 years - incredibly tough machine - replaced the original 7 hp with an 8 hp kohler ( I still have the original engine ) - still running good when I traded it in on a 312-8 - another incredible tough machine....wheel horse and cubs - top of the chain..glad you got it.

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • rustyedge1
      OME 417-8 drive belt needed
      By rustyedge1
      The local place I’ve bought parts from for years has changed owners, now they can’t even spell Wheel Horse let alone be if any help.
      Doing my spring tune up I noticed my drive belt is getting pretty ratty. Due to all I’ve read thought I’d ask for some advise on getting it right the first time on a new belt.
      Is there still dealers on this site selling OME stuff ? I know there are tons of aftermarket crap but not looking for that.
      Thank in advance.
       
       

    • rustyedge1
      NEED Condenser for 8 HP Kohler
      By rustyedge1
      Need a condenser for engine shown in photos 8 hp Kohler. Any venders carry them on this site ?
      All help appreciated..Have PayPal or can send check..


    • WheelPuke
      89 400 series 25A fuse blowing
      By WheelPuke
      I have my 25A fuse blowing every time I put a new one in the slot. The old one was burnt up when I got the tractor put this year. It sat for a year with a dead battery. I stopped using it as much because the transmission is clattering pretty bad when taking off on second or higher. I had to replace the clutch belt a few years ago and couldn't get an OEM. Not sure what is the problem there that's another issue though.
       
      I have checked the wiring and patched the worn spots where it could be grounding out. The fuse blows as soon as there is power to the system with the ignition off. I'm at a loss of what to check for at this point. Any input from someone who has had this issue would be appreciated. I'm not sure what these units are in the photos but do not know how to test them for a failure. They are directly in loop with the battery and the ignition loom looks to run into that 25A fuse.

    • Redtickuleez
      My New d180/wife upsetter
      By Redtickuleez
      Hello gentlemen!!! I recently bought a d180 with loader and backhoe. Im looking for serial number.. there is a plate under the steering wheel but its been pajnted over and i can make it out. Can y'all tell me another location and was this tractor pruchased originally with these attachments and any info would be greatly appreciated... Thanks fellow Wheel Horse enthusiasts !!! !! !!!
    • Aaron Coffman
      "Pond" Wheel Horse Walk Behind
      By Aaron Coffman
      Hi Red Square Community,
       
      I am looking into purchasing the below pictured "POND" Walk Away. The unit itself has the cast in “POND” on the chain reduction housing. The two main things I am looking to learn are what value is typical for these to sell for. This one has a Briggs & Stratton model “N” engine. It runs and drives, but the throttle linkage needs some adjusting. It comes with a cultivator and plow implement. 
       
      Secondly, I was wondering if there is any way to determine what year specifically this Pond is from. The seller believes late 1940s and not 1950s. I am new to these machines, so I am looking for some guidance. Thank you in advance! 
       

×
×
  • Create New...