Jump to content
oldlineman

1979 c-101 8 speed transmission

By oldlineman, in Transmissions and transaxles

Recommended Posts

oldlineman    1,772

oldlineman
Posted (edited)

I had the shiftier pull out of my tranny while pushing snow today. The screw that holds it in broke and the small piece in the tranny worked out far enough so that the shiftier pulled out of the tranny. I got the small piece of bolt out but am having a hard time getting the shiftier back in place. Is there a trick to getting this. Will have to get a new bolt at WH dealer.Any help from the experts will be appreciated. Need my horse back in service for the snow that is sure to come to western Pa.  Any info on adjusting the shifter screw would also be appreciated. Thanks    

Edited by oldlineman

Share this post

Link to post
Share on other sites
 

rmaynard    17,494

rmaynard
Posted (edited)

Both shift forks need to be lined up properly before inserting the shifter back into the hole. Check this post.

 

Edited by rmaynard
  • Like 1

Share this post

Link to post
Share on other sites
 

oldlineman    1,772

oldlineman
Posted

Thank you rmaynard those pictures where great, I think I will have to pull the fender pan so I can see into the tranny to line up the forkes. This is a great place to get excellent info and great support. I will get the bolt and get her back to what she likes pushing snow. Thanks again 

Share this post

Link to post
Share on other sites
 

rmaynard    17,494

rmaynard
Posted

Don't forget to get a new shifter boot if yours is bad. Little preventive maintenance goes a long way.

Share this post

Link to post
Share on other sites
 

oldlineman    1,772

oldlineman
Posted

Thank you again, I replaced it several years ago it still looks good this tractor I had from new and has been nothing but a dream. Have a 89 414-8 also would own nothing but a Horse! Glad I ran into this form I do have some mechanic skills but the experience from other guys helps. Have a great and safe Holiday, MERRY CHRISTMAS ! 

Share this post

Link to post
Share on other sites
 

rmaynard    17,494

rmaynard
Posted

Merry Christmas to you and yours as well.

Share this post

Link to post
Share on other sites
 

JC 1965    1,547

JC 1965
Posted

Glad to see Bob was able to give you the help you needed. I see that you are fairly new here so  :WRS:

Share this post

Link to post
Share on other sites
 

oldlineman    1,772

oldlineman
Posted

I got the set screw today at the WH dealer and the horse is back to work plowing snow. Thank you to all those that sent pics or advice, I will put a new boot on the shifter rod good advice to prevent future problems. Thanks again great forum!  oneoldlineman

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • eo1bart
      8 speed uni drive with 1 1/8” axles
      By eo1bart
      Looking for a gearbox with 1 1/8" axles for my 312. Ok if it needs rebuilding.
      Located in the New England area
    • Tim's Toy Tractor
      Seat, New Universal Tractor / Riding Mower Seat
      By Tim's Toy Tractor
      Seat, New! Universal Garden Tractor / Riding Mower Seat
       
      This is a new seat that I purchased for a project tractor and never used, it is in Perfect as New Condition.
       
      I have used this seat on a few Wheel Horse tractors, and they have been a perfect fit and look great.
       
      This is a Universal fitment seat; it has multiple mounting holes and mounting patterns for fitment on most Graden Tractors and Riding Mowers.
       
      $49.00  Call Tim @ 1-313-460-8858     (Local Pick-Up Only, No Shipping)






    • Tim's Toy Tractor
      3 Rib Firestone Tires, 16x6.50-8, 2 of them mounted on OEM Wheel Horse Rims, NEW!
      By Tim's Toy Tractor
      Two 3 Rib Firestone Tires, 16x6.50-8, 2 of them mounted on OEM Wheel Horse Rims, NEW!
       
      These tires are New, Never Used! Not the cheap China ones, these are High Quality Firestone Tires!
       
      Size: 16x6.50-8
       
      Great for any Garden Tractor or Riding Mower
       
      They are mounted on original Wheel Horse wheels that have been sandblasted & epoxied, and painted with ivory colored paint, note there are a few chips along the inside bead from mounting the tires. The rims will need your specific size wheel bearings installed.
       
      $99.00 Call Tim @ 1-313-460-8858        (Local Pick-Up Only, No Shipping)
       
       
       







    • Tim's Toy Tractor
      C - Series, Hood and Sheet Metal (square black insert) For Sale
      By Tim's Toy Tractor
      C - Series, Hood and Sheet Metal (square black insert) (also known as black hood models) for sale!
       
      This sheet metal set, including C Series Hood, Dash piece, Seat Bracket, and Left & Right-Side Covers, and Left & Right Floorboards was sandblasted, epoxy primed, and painted the OEM Wheel Horse Red Paint.
       
      The painted set is not perfect, a little metal pitting on one of the floorboards, a few little imperfections in the paint here and there as I'm a rookie painter, but this is a nice painted set of sheet metal to freshen up your C Series Wheel Horse!
       
      $140.00 O.B.O. Call Tim @ 1-313-460-8858        (No Shipping, Local Pick-Up Only)

















    • cheesegrader
      foot pedal conversion for hydro drive
      By cheesegrader
      About a decade ago, I bought a conversion kit here to remove the column drive lever and convert to a foot pedal for a 520h.
      I would like to convert a second tractor, and I need to replace one of the linkage bars on the first one that has cracked, but I can't find the vendor any more.
      Does anyone remember who made this awesome mod, and where I can find them?
×
×
  • Create New...