Jump to content
Sign in to follow this  
Followers 0
Hodge71

401 engine issues

By Hodge71, in Engines

Recommended Posts

Hodge71    665

Hodge71
Posted (edited)

I'm hoping you guys might be able to help me out here. The Suburban 400 I got last year has been great since I got it. It was the only one of the lot of 4 that ran awesome. Well I used it to plow a couple of the smaller storms here over the winter and I wanted to mow yesterday. Well it wont start at all now. Fresh fuel, fresh plug and still very weak yellow/no spark. Where are the coils and points etc. on these little Kohlers? I know nothing about the little K series and could really use some help fixing her up tomorrow.

 

Thanks in advance for all suggestions

Edited by hodge71

Share this post

Link to post
Share on other sites
 

buckrancher    2,695

buckrancher
Posted

coil and condenser are under the flywheel

points are under a cover on the side under the carburator

Share this post

Link to post
Share on other sites
 

WH nut    553

WH nut
Posted

I'm hoping you guys might be able to help me out here. The Suburban 400 I got last year has been great since I got it. It was the only one of the lot of 4 that ran awesome. Well I used it to plow a couple of the smaller storms here over the winter and I wanted to mow yesterday. Well it wont start at all now. Fresh fuel, fresh plug and still very weak yellow/no spark. Where are the coils and points etc. on these little Kohlers? I know nothing about the little K series and could really use some help fixing her up tomorrow.

 

Thanks in advance for all suggestions

Coil is uner the flywheel and point are on the left front of motor. If you got any snow up under the flywheel it could just be rusted up. Remove fly wheel to see, clean up with sand paper

  • Like 1

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0
Go To Topic Listing

  • Similar Content

    • CasualObserver
      Tractor 1958-1959 RJ-58 & RJ-59 D&A OM IPL SN.pdf
      By CasualObserver
      Operator manual
      Illustrated parts list
      6 pages 3.73MB
       
      Illustrated parts list #A-7136
      Includes PSB #023 #052 #058 #060 #080
      10 pages 938.48KB
       
      Engines used according to Toro
      Clinton B1290-1107
      Kohler K91-31307A
      Kohler K91-31388A
      Electric start kit
      Electric starter kit model EC-35 for Clinton engine - Listed for 1958 and 1959
      Electric starter kit model EK-35 for Kohler engine - Listed for 1958 and 1959
       
      6-12 tire chains model TC-12 - Listed for 1958 and 1959
       
      Seat cushion Foam rubber with imitation leather cover model FC-24 - Listed for 1958 and 1959
       
      Transmission drive belt 1567 - (4L x 29" or 1/2" x 29")
       
      Details & Attachments
      2 pages 107.33KB
       
      1958 model RJ-58
      1958 serial numbers that have shown up for the RJ-58
      Early models used Kohler K90T-27107D equipped with a Schnacke recoil unit with a backup rope starter contained under the recoil assembly and an oil bath air filter.
      00005
      00251
      01099 - No casting date on trans. Leather gearshift boot, large, round rear wheel hubs, "slab" hitch, replacement engine
      01188 - Has round rear wheel hubs
      01516
      01636
      01768
      01789 - No casting date on trans. Leather gearshift boot, 3-ear triangular rear wheel hubs, "slab" hitch, Clinton engine with Schnacke recoil
      01797
      01871
      02525
      03177
      03501 - Located in UK
      03796 - Kohler K90T-27107D with serial 364044 equipped with a Schnacke recoil unit with a backup rope starter contained under the recoil assembly and an oil bath air filter.
      04041
      04883
      04885
      05000
      05619
      05714
      05798
      06528 - May be 16528
      06749
      06771
      07633
      07649 - Transmission J12-8 October 12, 1958
      07725
      08440
      08612
      09284
      09337 - Hard to read
      10163
      11432
      11628 - # 3521 spline gear with 10 splines changed to 11 splines in 5003 and 5010 transmissions at serial # 11628 PSB #023
      11916
      12221 - B3-9 trans casting date - Kohler K91 engine with Schnacke recoil
      12291
      14473
      14713
      16097
      16528 - May be 06528
      166x6
      16868 - F4-9 trans casting date - Kohler K91 engine with Fairbanks recoil, solid pan seat without holes
      18348
      June 2023
      18500 and lower 
      Late 1958 units came with a Kohler K-91T-31307A equipped with a Schnacke recoil unit with a backup rope starter contained under the recoil assembly and an oil bath air filter.
      ------------------------------------------------------------------------------------------------------------------
       
      Details & Attachments
      2 pages 106.94KB
       
      1959 model RJ-59
      1959 serial numbers that have shown up for the RJ-59
      Early 1959 units came with a Kohler K-91T-31307A equipped with a Schnacke recoil unit with a backup rope starter contained under the recoil assembly and an oil bath air filter.
      18501 and up - Possible 1100 units built
      20078 - Located in UK
      203xx
      21033
      292xx
      21900 - 1960 Suburban 400 began production at serial #21900 somewhere around Aug-Oct 1959.
      Late model RJ-59 tractors with a Kohler would have a K-91T-31388A with the Fairbanks recoil starter and paper air filter element. The 31388A was also used on the 1960 Suburban 400.
      K91T-31388A Serial 425251 found on RJ-59
    • Gcw804
      Choke Assembly
      By Gcw804
      I have a WH 300 series with a Kohler Magnum 10 engine and I cannot for the life of me figure out how to get the choke cable and linkage set so it will work. The numbers on the engine label  are worn off the, so I cannot give anyone that information. Does anyone have a picture or can you head me in the right direction.
       
      My arm for the linkage assembly is set at 3 o'clock and 9 o'clock if that helps. There seems to be several different linkage rods for this engine.
       
      Thanks
       
      Gary Williams

    • cJ_3D
      PTO clutch support screw torque
      By cJ_3D
      Hey all!
       
      Replacing the drive belt on my 252-h. Anyone know the torque specification for the center screw when I put this pto clutch back on? I know it was on there tight it took a minute for the impact to break it loose. Thanks!
       
      CJ

    • Keaton
      RJ 59 throttle help
      By Keaton
      i do not know how to route this throttle cable on this RJ 59, i will attach some pictures, i watched packrats video on adjusting the govner on his 401, it did not look the same. also i think that and is way to long so that might be part of it. ( and also the color on that block looks beautifull) there is come pics, the more the better!







    • bkarp@roadrunner.com
      oil problem
      By bkarp@roadrunner.com
      my magnum 12 kohler all of a sudden is blowing oil out of the carb. if rings are bad should oil be blowing out of the muffler.thanks for any help brent
×
×
  • Create New...