Jump to content
Sign in to follow this  
Followers 0
Fun Engineer

Trailblazer 7 Snow Throw and 32" mower deck.

By Fun Engineer, in Wheel Horse Tractors

Recommended Posts

Fun Engineer    859

Fun Engineer
Posted

I finally acquired a motor/blower to go with my 32" mower deck for a Trailblazer 7 Snow Throw. I'm missing some parts and hope someone can help me. I'm in need of the following:

Owners manual for the deck. Sorry no model number tag but I believe it may be a 5-4321 or 5-4322.

Belt guard (plastic) for the blowers power unit.

Chute control rod. I need the complete rod assembly from end to end. PO has no idea what happened to the original ???

Belt guard for the deck. I'll probably have to fab one up myself but it doesn't hurt to ask. Even a picture would be helpful.

Any help will be appreciated.

Dave

Share this post

Link to post
Share on other sites
 

TT-(Moderator)    1,162

TT
Posted

I'll post this here for all the world to see:

mowerblower.jpg

Check your PM & let me know if this is what you need. I don't have the entire manual scanned, but might be able to get to it by the end of winter. :ychain:

Share this post

Link to post
Share on other sites
 

CasualObserver    3,411

CasualObserver
Posted

Dave, that plastic belt guard is still available new from Toro. I bought one a couple years ago for a Trailblazer I had here. Comes in black.

I just checked. $30 and change from mowpart.com, which means it will be about $40-45 at Toro.

Share this post

Link to post
Share on other sites
 

Fun Engineer    859

Fun Engineer
Posted

Thanks Jason

I think I'll get one ordered.

Dave

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0
Go To Topic Listing

  • Similar Content

    • Donavon1
      Project black betty
      By Donavon1
      Project black Betty the diesel 1054
    • BrianStasC-101
      predator 420 pto
      By BrianStasC-101
      Hello all. I am looking for suggestions on adapting the pto from my C series tractor to a harbor freight predator 420 13hp engine. I know the predator motors are a controversial topic however it is the route I have chosen for this particular machine. The intent was to mostly use it for plowing so no PTO required but it would be handy to have. Looking to hear from someone that has successfully done the swap that may offer any advice before I attempt to transfer it over. Just looking for any general pointers that will help me along the way to make it go as smoothly as possible. 
    • FAST41
      INDY 500 Craftsman Riding Tractor.
      By FAST41
      I am new to this group. I have my sons collection of Wheel Horse tractors that are definitely rare models. He still has one to pick up that’s dual wheel and was purchased from Peabody Coal Co. This is the perfect site to get involved with. The best advice comes from folks that are hands on.. had to be their own machine shop. Nothing compares to the knowledge in this group.! But my first topic is this 19hp Craftsman INDY 500 limited edition model. I was reading a topic on here about the 18hp and 20hp models, but cannot find a single replica of this tractor on ANY site or e-bay. We live near central Ohio, so I’m assuming it’s a regional release.The Briggs engine lobes like a medium cam in a V8. We thought it was an intermittent miss, but it’s not missing a bit. The engine is the strongest riding tractor I’ve ever operated. It will literally cook the deck belt in high grass before dragging the engine down. Very wide and lower to the ground. I never got the size, but the rearend is all tires.! Looks like a dragster from behind.. almost  gives the appearance of shortened axle tubes in a hot rod. Just wondering if anybodys ever seen this particular model. My next top is will be about the C160 total hydraulic Wheel Horse he just acquired. Claim they were specially made for snow removal.







    • Wendell
      314-8
      By Wendell
      New to the forum, but not to Wheel Horse. I just bought a 314-8 on the gear shift pattern there is what Toro calls a spring shift control, my 312-8 doesn't have this The 314 is a 1999, what was the purpose for this. Thanks.
    • Bobbi Barroso
      Snowblower question
      By Bobbi Barroso
      Missing lift rod. Anyone know where to buy one or the dimensions to make one?
×
×
  • Create New...