William Larsen 3 #1 Posted 10 hours ago I am looking at a 1969 Charger 12 and would like everyone's opinion. 3 Share this post Link to post Share on other sites
Racinbob 13,189 #2 Posted 5 hours ago That certainly looks solid. Battery and seat are no cause for concern other than a few bucks. If operates as good as it looks it's a decent deal.........but he did say OBO. Aren't Wheel Horses pretty darn rare out there? to 1 Share this post Link to post Share on other sites
ri702bill 13,056 #3 Posted 4 hours ago Welcome! "Comes with 2 rear tires and chains" .... What was the implement the PO was using that required chains?? I ask, as both a tiller and a plow put a lot of stress on the "F" plate - look underneath where the Unidrive bolts onto the vertical wraparound plate for cracks at the four mounting holes. VERY common, fixable but time consuming. I hope it does not look like this one - an 854 that plowed all its long life.... Share this post Link to post Share on other sites
Retired Wrencher 6,989 #4 Posted 4 hours ago (edited) William: 1st. when it comes to the West Coast is there a lot of dealerships around? Second, do you know of the dealerships that are or were in business or is there still dealerships out there? If not, you can always go to many of our parts vendors that are listed here. 2nd you can always rely on the help of members here to help you out. Even an old fart like me still needs help from time to time. I hope you can pick that tractor up and be happy with it. Best of luck and most of all enjoy the ride if you buy it. Edited 4 hours ago by Retired Wrencher 2 Share this post Link to post Share on other sites
ri702bill 13,056 #5 Posted 4 hours ago 15 minutes ago, Retired Wrencher said: Even an old fart like me That describes a whole bunch of us here.... Share this post Link to post Share on other sites
Ed Kennell 47,320 #6 Posted 4 hours ago to the It looks pretty clean. If it runs and mows it would sell for $4-500 in my area, but location and supply means a lot. The Sundstrand hydro transmissions can be a problem if not maintained properly. I test all that I buy by strapping them to a tree and make sure they will spin the tires in forward and reverse. 2 Share this post Link to post Share on other sites
Retired Wrencher 6,989 #7 Posted 4 hours ago 10 minutes ago, ri702bill said: That describes a whole bunch of us here.... Very true Bill. Happily going through life with no brain. Lol. 1 Share this post Link to post Share on other sites
953 nut 69,297 #8 Posted 3 hours ago 11 minutes ago, ri702bill said: 28 minutes ago, Retired Wrencher said: Even an old fart like me That describes a whole bunch of us here.... I'm one too! Chargers are a great tractor, @pfrederi has several of them. Do the test that @Ed Kennell mentioned and ask about the seller's history with the Charger. Hope you have room for more Wheel Horses, they tend to be habit forming. 2 Share this post Link to post Share on other sites
rjg854 13,357 #9 Posted 3 hours ago 2 follow the advice given all ready to make sure it functions as it should. If you end up purchasing it, we have a check list to go through a new to you tractor. A good working hydro is a big advantage when mowing if you have a lot of forward reverse type work. Share this post Link to post Share on other sites
oliver2-44 11,750 #10 Posted 2 hours ago (edited) Edited 1 hour ago by oliver2-44 Share this post Link to post Share on other sites
Bar Nuthin 3,223 #11 Posted 1 hour ago 8 hours ago, William Larsen said: would like everyone's opinion You'll find no shortage of opinions, here! WARNING!!! - This place is full of "enablers" that believe you should own a Wheel Horse for every day of the week! With regards to the one you're asking about, location plays a factor. Make an offer and see where you and the seller come to agreement. Here is Indiana, it's a $400 to $500 find. Once the Wheel Horse bug hits you, be prepared to spend more money on dialing it in and adding attachments. Share this post Link to post Share on other sites
oliver2-44 11,750 #12 Posted 1 hour ago 8 hours ago, William Larsen said: I am looking at a 1969 Charger 12 and would like everyone's opinion. That is a great model tractor. Check the tires for age cracks , use that to negotiate. What's your intended usage? I'm not that familiar with that older style deck. But maybe someone can comment whether it has the "Double D" deck spindles and blade availability. I know you can upgrade the deck to complete new spindles with common size shafts. An ebay seller has them for for the price of just buying bearings. Share this post Link to post Share on other sites