520-8 drive belt size ?

[ricksrj58 274]

what size drive belt do i need ?

[Sparky-(Admin) 26,195]

  It’s the standard drive belt that all the 300 &  400 series 8 speeds use…WH Part#7473.

  I don’t know the actual size though. 

[gwest_ca-(File Mod) 12,423]

Tractor drive belt  107939 replaced by 93-9809 - (HB x 83.5" or 5/8" x 83-1/2")

Gates replacement 6983

[Ed Kennell 46,837]

This belt works great on my 310-8.     I don't know if the 520 requires the 83 1/2 ", but the belts from TSC are returnable for a 100% refund.

 

 

 

 

[953 nut 68,250]

31 minutes ago, Ed Kennell said:

belt works great on my 310-8. 

@Ed Kennell, the Hydros have a much larger drive pulley on the engine than on an 8 speed requiring an inch longer belt, 5/8" X 82" for 8 speeds and 5/8" X 83" for a Hydro.

[Ed Kennell 46,837]

30 minutes ago, 953 nut said:

@Ed Kennell, the Hydros have a much larger drive pulley on the engine than on an 8 speed requiring an inch longer belt, 5/8" X 82" for 8 speeds and 5/8" X 83" for a Hydro.

Good to know Richard.   But does his 520-8 use the same 82" belt as a 310-8 ?

[953 nut 68,250]

4 hours ago, Ed Kennell said:

Good to know Richard.   But does his 520-8 use the same 82" belt as a 310-8 ?

See post #9             

Edited Saturday at 04:48 PM by 953 nut

[gwest_ca-(File Mod) 12,423]

The Briggs & Stratton Twin 8-speeds and the Onan Twin 8-speeds use the longer 83-1/2" belt. Gates and Napa replace it with 6983 which is 5/8" x 83" so that must be what length works best.

[953 nut 68,250]

I took a look at the belt application chart and here is what I came up with, you be the judge as far as how much longer or shorter belt may work, to me we aren't launching Artemis 3 to the moon, just driving a Wheel Horxse.

[ricksrj58 274]

thank you guys.