1054 Project 57 #1 Posted 4 hours ago 1054 with 5248 hydraulic assembly (model # A4CCWH pump). Cylinder is not moving either direction. Fluid level is good, pulley is turning fine. Share this post Link to post Share on other sites
peter lena 9,978 #2 Posted 3 hours ago @1054 Project might uses this as a basic look up , maybe find good ( verified ) unit , https://www.google.com/search?q=typical+issue+with+hydraulic+valves&rlz=1C1CHBF_enUS866US866&oq=typical+issue+with++hydraulic+valves+&gs_lcrp=EgZjaHJvbWUyBggAEEUYOTIHCAEQIRigATIHCAIQIRigATIHCAMQIRiPAjIHCAQQIRiPAtIBCTI1MjU2ajFqNKgCAbACAfEFG4MOMfuiJYfxBRuDDjH7oiWH&sourceid=chrome&source=chrome.ob&ie=UTF-8 . pete Share this post Link to post Share on other sites
adsm08 4,842 #3 Posted 41 minutes ago It's a pretty simple system. If the fluid level is correct, and the pulley SHAFT is spinning, I'd start by disconnecting the rock shaft from the ram and see if the ram can be moved by hand. If so it is likely to have bad seals inside and is in full bypass. Share this post Link to post Share on other sites
