horseman with no horse 67 #1 Posted yesterday at 12:33 AM does anyone offer performer onan intake manifold reseal service? Share this post Link to post Share on other sites
sqrlgtr 3,190 #2 Posted yesterday at 01:00 AM 23 minutes ago, horseman with no horse said: does anyone offer performer onan intake manifold reseal service? Engine Related Parts & Kits | Case Ingersoll Tractors Northeast | Connecticut I have used these guys, but I just bought one they had that was ready to bolt on but have my old one that I'm going to send them in the future that it replaced. I did have to drill and tap "new" manifold for the vacuum gauge fitting no biggy though. Share this post Link to post Share on other sites
lynnmor 8,880 #3 Posted yesterday at 04:41 PM 16 hours ago, horseman with no horse said: does anyone offer performer onan intake manifold reseal service? If you can use a drill, it isn't a difficult job. Information 1 Share this post Link to post Share on other sites
sqrlgtr 3,190 #4 Posted yesterday at 05:51 PM 1 hour ago, lynnmor said: If you can use a drill, it isn't a difficult job. Information that is certainly an option. The one they sent me was A1 looking and was sprayed with Sumin after being sealed that actually seals the manifold also. my old one fell apart in 2 pieces when I took the carb off so I was pretty sure that was what was causing the surging problem it was having . Share this post Link to post Share on other sites
lynnmor 8,880 #5 Posted yesterday at 06:14 PM 19 minutes ago, sqrlgtr said: that is certainly an option. The one they sent me was A1 looking and was sprayed with Sumin after being sealed that actually seals the manifold also. my old one fell apart in 2 pieces when I took the carb off so I was pretty sure that was what was causing the surging problem it was having . Never saw one that bad, maybe a PO knackered it. I have resealed a number of them and there was only a hint of a problem. Share this post Link to post Share on other sites
sqrlgtr 3,190 #6 Posted yesterday at 07:37 PM Pic of the new and old manifold thought I had a pic of old manifold after it fell apart but couldnt find it. As soon as I tried to take carb off manifold it came aprt in my hands . Share this post Link to post Share on other sites
Bill D 2,983 #7 Posted yesterday at 09:22 PM Resealed my intake with Motoseal. Bolted back together with 6-32 screws and locknuts. 2 Share this post Link to post Share on other sites
Bill D 2,983 #8 Posted 11 hours ago 15 hours ago, sqrlgtr said: Pic of the new and old manifold thought I had a pic of old manifold after it fell apart but couldnt find it. As soon as I tried to take carb off manifold it came aprt in my hands . Still have the old manifold? Send it to me and I'll seal it up for you. Share this post Link to post Share on other sites
sqrlgtr 3,190 #9 Posted 9 hours ago 2 hours ago, Bill D said: Send it to me and I'll seal it up for you. I might just take you up on that @Bill D. I have another 520H that is waiting in the wings that I need to go through all the mechanicals and get up to snuff but I have been super busy lately. Share this post Link to post Share on other sites
Bill D 2,983 #10 Posted 7 hours ago 1 hour ago, sqrlgtr said: I might just take you up on that @Bill D. I have another 520H that is waiting in the wings that I need to go through all the mechanicals and get up to snuff but I have been super busy lately. Getting it apart without breaking anything is half the battle. I'm curious why it fell apart so easily. Share this post Link to post Share on other sites
sqrlgtr 3,190 #11 Posted 2 hours ago 5 hours ago, Bill D said: Getting it apart without breaking anything is half the battle. I'm curious why it fell apart so easily. Yes, I was very surprised when it just came apart in my hands, all I done was barely peck the manifold getting carb to break free from it. Share this post Link to post Share on other sites
