onan manifold reseal

[horseman with no horse 67]

does anyone offer performer onan intake manifold reseal service? 

[sqrlgtr 3,186]

23 minutes ago, horseman with no horse said:

does anyone offer performer onan intake manifold reseal service? 

Engine Related Parts & Kits | Case Ingersoll Tractors Northeast | Connecticut I have used these guys, but I just bought one they had that was ready to bolt on but have my old one that I'm going to send them in the future that it replaced. I did have to drill and tap "new" manifold for the vacuum gauge fitting no biggy though.

[lynnmor 8,878]

16 hours ago, horseman with no horse said:

does anyone offer performer onan intake manifold reseal service? 

 

If you can use a drill, it isn't a difficult job.  Information

[sqrlgtr 3,186]

1 hour ago, lynnmor said:

 

If you can use a drill, it isn't a difficult job.  Information

that is certainly an option. The one they sent me was A1 looking and was sprayed with Sumin after being sealed that actually seals the manifold also. my old one fell apart in 2 pieces when I took the carb off  so I was pretty sure that was what was causing the surging problem it was having .

[lynnmor 8,878]

19 minutes ago, sqrlgtr said:

that is certainly an option. The one they sent me was A1 looking and was sprayed with Sumin after being sealed that actually seals the manifold also. my old one fell apart in 2 pieces when I took the carb off  so I was pretty sure that was what was causing the surging problem it was having .

Never saw one that bad, maybe a PO knackered it.  I have resealed a number of them and there was only a hint of a problem.

[sqrlgtr 3,186]

Pic of the new and old manifold thought I had a pic of old manifold after it fell apart but couldnt find it. As soon as I tried to take carb off manifold it came aprt in my hands .

[Bill D 2,980]

Resealed my intake with Motoseal.  Bolted back together with 6-32 screws and locknuts.