JCM 11,341 #1 Posted June 20 More to come on my newest addition. Picked it up last Saturday and have made decent progress so far. It's the one in the background. 2 14 2 Share this post Link to post Share on other sites
c-series don 12,300 #2 Posted June 20 What the heck Jim? ONE picture? You should know better than that! I know you said more to come but did you need to keep us waiting?!! 6 Share this post Link to post Share on other sites
JCM 11,341 #3 Posted June 20 That's all I could talk @Raven AKA my significant other into posting a lot of pics this evening. I was in Mass and she headed to N.H to hang out with her sister. We met up with @Bill D and @Brockport Bill at the New York border last Saturday. We left at 5 30 am and returned home to Maine at 5 pm. Long day and haven't stopped working on it since. Will keep you guy's updated on the progress. By the way you meet the nicest people on Red Square. Two great members. Bill and Bill. 8 Share this post Link to post Share on other sites
Bill D 3,061 #4 Posted June 21 (edited) Glad to see it getting the love and attention it deserves and glad to have had a part in rescuing it! I can't wait to see all the rehab photos and the finished product. Edited June 21 by Bill D 4 1 Share this post Link to post Share on other sites
ebinmaine 80,062 #5 Posted June 21 2 hours ago, JCM said: newest addition Super happy to see you got this! It'll be in great hands. 1 2 Share this post Link to post Share on other sites
JERSEYHAWG / Glenn 4,586 #6 Posted June 21 Great addition. Envious of that sweet score. 2 1 Share this post Link to post Share on other sites
Brockport Bill 2,448 #7 Posted June 21 7 hours ago, JCM said: That's all I could talk @Raven AKA my significant other into posting a lot of pics this evening. I was in Mass and she headed to N.H to hang out with her sister. We met up with @Bill D and @Brockport Bill at the New York border last Saturday. We left at 5 30 am and returned home to Maine at 5 pm. Long day and haven't stopped working on it since. Will keep you guy's updated on the progress. By the way you meet the nicest people on Red Square. Two great members. Bill and Bill. I can still see the smile on your face -- great to know you have already started the TLC -- was pleasure to meet you --- happy to know our delivery connection worked well for you and the LSE is now in a new home sleeping well - I enjoyed our chat that day -- Be well -- Bill 1 4 2 Share this post Link to post Share on other sites
JCM 11,341 #8 Posted June 21 7 hours ago, Bill D said: Glad to see it getting the love and attention it deserves and glad to have had a part in rescuing it! I can't wait to see all the rehab photos and the finished product. PLEASE feel free to list the actual parts and roughly labor / time spent on this LSE @Bill D and @Brockport Bill for transportation. Please give credit where credit is due. Without you both this would not have been possible. Can't thank you guys enough. 1 3 Share this post Link to post Share on other sites
953 nut 68,121 #9 Posted June 21 12 hours ago, JCM said: We met up with @Bill D and @Brockport Bill at the New York border last Saturday. Sounds like a clandestine meeting where you were attempting to elude federal charges of transporting a LSE across State Lines. Great to know our fellow members will go out of their way to assist one another. 6 1 Share this post Link to post Share on other sites
ebinmaine 80,062 #10 Posted June 21 7 minutes ago, 953 nut said: Sounds like a clandestine meeting where you were attempting to elude federal charges of transporting across State Lines @Bill D has met us a couple times down there as well. He's definitely a "repeat offender"... 1 5 Share this post Link to post Share on other sites
WHX?? 57,628 #11 Posted June 21 (edited) 15 hours ago, c-series don said: What the heck Jim? ONE picture? He baited us .... Edited June 21 by WHX?? 1 3 Share this post Link to post Share on other sites
Brockport Bill 2,448 #12 Posted June 21 12 hours ago, JCM said: PLEASE feel free to list the actual parts and roughly labor / time spent on this LSE @Bill D and @Brockport Bill for transportation. Please give credit where credit is due. Without you both this would not have been possible. Can't thank you guys enough. My Honda Ridgeline was happy to do the transport...i could say it was 4 hours on the road round trip from Poughkeepsie but that includes Bill D's recommended side trip to the legendary Great Barrington bakery we diverted to visit....which was very much worth it. Has anyone had sour dough bread with chocolate chunks in it? Yes, of course warmed up. MMMMM good! 1 2 1 Share this post Link to post Share on other sites
ebinmaine 80,062 #13 Posted June 21 1 hour ago, Brockport Bill said: Great Barrington bakery Gotta check that out sometime Share this post Link to post Share on other sites
JCM 11,341 #14 Posted June 21 Some before and after pics. All small chrome parts are cleaned and ready. Gorilla tape has been redone on a few tears on the leather seat. Seat back is in really nice shape. Both front wheels and tires need cleaning. Transmission oil and a Toro / WH filter done. Synthetic Mobil 1 engine oil was changed by BILL D. Both rear tail light lenses were replaced from amber to red. Used polishing compound on all red surfaces for now to bring some red out. Leather seat was cleaned with Maquire products. Had to use a snap-on swivel adapter with flexible hose to grease the fan gear that looked like it has almost never been greased. On most of the grease fittings I use a small roll pin punch to go in and out off the stuck fittings. Installed one new mule drive pulley. Last pic is Big Brother keeping an eye on the new addition to the family. STAY TUNED Thanks for your interest. 9 Share this post Link to post Share on other sites
Bill D 3,061 #15 Posted June 21 (edited) So I rescued this 420 LSE from a friends backyard. He's an older gentleman who often gets used, unwanted tractors from others. When I got it home I found the cylinders had water in them from sitting outside with the air cleaner off. I blew out the cylinders and oiled them then pulled the carb and rebuilt it with an OEM Kohler rebuild kit I had around. Put some new fuel line on it, new plugs and went to fire it up on 50:1 mix, nothing! Coil was bad. Got an aftermarket coil online and it started right up. I can hardly believe how well this thing runs. Just bump the key and it fires right up. I was repairing the wiring and I bumped the starter while testing the key, and it started at idle, with no choke!! I had to scramble to shut it off as it was in my garage and the kill wire was unhooked! The wiring was another issue. The connector and light panel was melted. Got a replacement light panel and spliced in a connector from the remains of an old wiring harness I had saved. Got all the test lights working and all the safety switches functional except the neutral safety switch. Not one of Wheel Horse's better designs. I left that jumped. If Jim wants to connect it it's easy to do. Since he and his wife are the primary users I left it up to them. It does need a new oil pressure switch. I pulled tank and cleaned it. Installed a new tank grommet and shut off with screen. Changed the engine oil. Jim did the transmission service. All new Made in USA fuel lines. New air cleaner, plugs, aftermarket coil, rebuilt kit for the carb, LED test light panel, light panel connector spliced in with double crimp splices, new tube in right front tire, new battery and home made battery tie down, new drive belt and bushing for the idler pivot, fixed the bent idler arm, reinforced the hoodstand where it cracks with fender washers, replaced the left front spindle with a good used one, installed a good steering shaft cover, changed the cracked seat base and found a proper spacer for the seat mount to replace a socket that had been used previously. I tried to make it mechanically sound and left it up to Jim to make it pretty. It could use a new or rebushed steering block, 6472 bearing and tie rods. It has 1450 hours on the clock and is a true survivor. I'm sure I'm forgetting something. Glad to see it breathing fresh, pine scented Maine air. Last, but not least, my thanks to @Brockport Bill for transporting. I don't have truck or trailer. Edited June 21 by Bill D 1 5 4 Share this post Link to post Share on other sites
Bill D 3,061 #16 Posted June 21 1 hour ago, ebinmaine said: Gotta check that out sometime If you go, get the cherry pecan bread and olive bread. Two of my faves. 1 1 Share this post Link to post Share on other sites
Sodaking27 1,318 #17 Posted June 21 @JCMCongratulations on the new addition. 2 1 Share this post Link to post Share on other sites
JCM 11,341 #18 Posted June 21 (edited) I have a nice order for K & B and told him no big hurry with the BS going on. I may even add a few more items I'm sure Brian won't mind . @76c12091520h Edited June 21 by JCM 2 Share this post Link to post Share on other sites
Bill D 3,061 #19 Posted June 21 Some pictures. 20260510_105730.mp4 20260510_105802.mp4 9 2 Share this post Link to post Share on other sites
Bill D 3,061 #20 Posted June 28 How's it coming along? 1 1 Share this post Link to post Share on other sites
JCM 11,341 #21 Posted June 28 Excellent . Cleaned up those chrome mower wheels this morning. I have a nice 1991 48'' SD mower deck that came with my 91 520-H when I bought it. Just received recently 3 complete spindles from K & B . Those are the next projects in line. Would like to use this 420 around the property here and there. @Bill D 2 2 Share this post Link to post Share on other sites
ebinmaine 80,062 #22 Posted June 28 1 hour ago, JCM said: Would like to use this 420 around the property Love that. 1 Share this post Link to post Share on other sites
Sparky-(Admin) 26,177 #23 Posted June 29 16 hours ago, JCM said: Would like to use this 420 around the property here and there. @Bill D Looking forward to watching you on that 420 doing a trail ride with me this September! 1 1 Share this post Link to post Share on other sites
ebinmaine 80,062 #24 Posted June 29 1 hour ago, Sparky said: trail ride with me this September Niiiiice 1 Share this post Link to post Share on other sites
702854boy 1,069 #25 Posted June 30 @Bill D or @JCM, how much would you want for one of those horse head keys? Share this post Link to post Share on other sites
