Pullstart 69,978 #1 Posted 17 hours ago It’s a good day for a caption this, or better yet how many violations can you find? 5 Share this post Link to post Share on other sites
CasaytheMann 146 #2 Posted 17 hours ago What's that string hanging out of the back of his battery circular saw?!?! 3 Share this post Link to post Share on other sites
Handy Don 16,617 #3 Posted 16 hours ago Wow. It’s been years since I’ve done something like this. No blade protector on the saw. No eye, dust, or ear protection when cutting a hazardous material. Dubius support of the workpiece. Ripping without a guide fence. Possibly incorrect blade? Share this post Link to post Share on other sites
Sparky-(Admin) 25,309 #4 Posted 16 hours ago No flip-flops…seems fine to me 2 1 6 1 Share this post Link to post Share on other sites
ri702bill 12,114 #5 Posted 16 hours ago The lower end of the hand railing has no raised stop to help to keep a grip if falling. The width of the railing is excessive - difficult to grip. Looks like the door swings out - the landing is insufficiently short - does not prevent having to do a two step upon entry. 2 Share this post Link to post Share on other sites
squonk 46,591 #6 Posted 16 hours ago 36 minutes ago, Sparky said: No flip-flops…seems fine to me Stinky Cowboy boots with Jorts! 3 Share this post Link to post Share on other sites
Pullstart 69,978 #7 Posted 15 hours ago 1 hour ago, Handy Don said: eye protection surprisingly, I had it. And I’m glad, when a little cross cut trim cut shot pieces all over my face! 1 hour ago, CasaytheMann said: What's that string hanging out of the back of his battery circular saw?!?! Notice that string has been taped? 1 hour ago, Handy Don said: No blade protector on the saw. It’s custom 1 hour ago, Handy Don said: Ripping My table saw motor siezed up. Things happen, decisions were made 1 Share this post Link to post Share on other sites
Beap52 2,267 #8 Posted 15 hours ago May be optical illusion, but it looks to me like the bottom and top risers are taller than the middle step. Share this post Link to post Share on other sites
adsm08 4,483 #9 Posted 14 hours ago As an individual who still has all his proper body parts, I see nothing wrong here. 1 1 3 Share this post Link to post Share on other sites
My_horse 120 #10 Posted 13 hours ago The only thing I see wrong is that saw with no guard. That thing belongs in the trash. personally, I wouldn’t be cutting, bending over like that. That’s what saw horses are for. I’ve never used eye or ear protection when cutting wood. Been doing carpentry for 30 years. 1 Share this post Link to post Share on other sites
Pullstart 69,978 #11 Posted 13 hours ago 1 minute ago, My_horse said: The only thing I see wrong is that saw with no guard. That thing belongs in the trash. It was modified for an actual purpose. I made the saw able to back cut 15 degrees, for a flush cut against a wall. I don’t use it often, unless it’s for a purpose. Share this post Link to post Share on other sites
My_horse 120 #12 Posted 12 hours ago (edited) 34 minutes ago, Pullstart said: It was modified for an actual purpose. I made the saw able to back cut 15 degrees, for a flush cut against a wall. I don’t use it often, unless it’s for a purpose. Makes sense then. Carry on! I have an old Makita that fell a couple times and the guard hangs up. That’s the dedicated “cuttin through shingles” saw. 😎 Edited 12 hours ago by My_horse 1 Share this post Link to post Share on other sites
Pullstart 69,978 #13 Posted 4 hours ago 12 hours ago, ri702bill said: Looks like the door swings out - It’s an old door, and will some day be a slider. But it swings in 3 Share this post Link to post Share on other sites
JoeM 9,944 #14 Posted 3 hours ago It took a while but I see what is rong Found it! No tools in pouch! 4 Share this post Link to post Share on other sites
Pullstart 69,978 #15 Posted 1 hour ago Hey now @JoeM! The square and drill go in the big right pocket, screws in the left, tape measure in the small right. Mostly dark, or in use… but I enjoy the belt! 1 Share this post Link to post Share on other sites
953 nut 66,134 #16 Posted 1 hour ago Can't se Middleville from OSHA so you are in the clear. 1 Share this post Link to post Share on other sites
JoeM 9,944 #17 Posted 1 hour ago 8 minutes ago, Pullstart said: but I enjoy the belt yeah yeah, just there to impress the ladies! "I got a tool pouch!" 1 Share this post Link to post Share on other sites
squonk 46,591 #18 Posted 1 hour ago 1 hour ago, JoeM said: It took a while but I see what is rong Found it! No tools in pouch! We don't want them Jorts fallin down! 3 Share this post Link to post Share on other sites
SylvanLakeWH 31,440 #19 Posted 1 hour ago 16 minutes ago, squonk said: We don't want them Jorts fallin down! Thank you... Share this post Link to post Share on other sites
