Rick8814 0 #1 Posted 13 hours ago Hello all! Can any one help me with the correct switch and terminal letters? 1998 toro wheel horse 312-8. Model number 73428 serial number 8900839. I tried the switch in the parts manual. But didn't fix the issue. Won't start. Can't get the kill relay to energize, and no power to small blue wire on the solenoid. I tested the solenoid as per the electrical manual and its good. I messed up some where because when I turn the key the first 10 amp fuse blows. Any help much appreciated Rick Share this post Link to post Share on other sites
gwest_ca-(File Mod) 12,237 #2 Posted 11 hours ago This should help. Click on the picture in the link for more Are you looking at the 5 pages of colored wiring? Share this post Link to post Share on other sites
953 nut 66,111 #3 Posted 5 hours ago 8 hours ago, Rick8814 said: when I turn the key the first 10 amp fuse blows Can you give us a bit of background on what led you to replacing the ignition switch? What if anything did you do prior to changing the ignition switch that could have impacted your electrical wiring? Is the switch you bought the one Gary has given you information on? The drawing below shows all of the components that come into play when the key is turned to START. I do not own this model but suspect that the Neutral Safety Switch is located on the metal plate the shift lever comes through. Examine the wiring to that switch first. A pinched wire could be grounding out causing the fuse to blow. Check all of the wiring anyplace close to any work that has been done. Good luck and let us know what you find. 1 Share this post Link to post Share on other sites
