Ultrasonic Cleaner

[8ntruck 8,859]

Looks like I've got some carb work coming up this summer.  An ultrasonic cleaner would be a handy tool for this.  HF has one about the right size for a reasonable price.

 

Anybody out there have comments or advice on this subject?

[ebinmaine 78,799]

I bought the Vevor 10L size 3 years ago. 

 

Works good. 

 

 

[adsm08 4,453]

Watch which solvents you use. Many common ultrasonic solvents are caustic to aluminum. 

 

There is one on Amazon that is aluminum safe. Not cheap, but better than ruining the carb you are looking to save.

 

https://www.amazon.com/Ultrasonic-Solution-Carburetors-Cleaning-Immersion/dp/B09KK6KR3Z/ref=sr_1_1_sspa?crid=MW4TT953L7DP&dib=eyJ2IjoiMSJ9.Hf_fBUuXW1HjooHlm4YwrBUClH2-3mM_H0HsbKVuqsEr6xWToJl7pLZH2SE2-xMxl9-GXlWUOxmOjCVfWK65n1QUWwDHE-Ig7OIPL9WTQ7WVsFmSWxodHSxVfb-U8qD0SaaO8UlL2IsXuXlpV38sxnOn_rDrwLSlySXPMKkzkZbrvs8yh8oPNdujjtpF7PlnBxsgibVw3D4OY6A5Qbz4ibIW5qZgP3SpbVhX0xBIJ4io4_dLZ6zXkrlj3nl2biQYHbtYIvG4K-00gcY69oNCZULueCRC2vA5DavITXrx-r4.8PaEza685VoiKldJEjDUbJ954mL2_u1HO3n2B5tZcj0&dib_tag=se&keywords=ultrasonic%2Bcleaner%2Bfor%2Bcarburetors&qid=1779653786&s=automotive&sprefix=ultraso%2Cautomotive%2C157&sr=1-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1

[ebinmaine 78,799]

1 minute ago, adsm08 said:

Watch which solvents you use. Many common ultrasonic solvents are caustic to aluminum

 

 

Excellent point.  

 

 

I've been using lacquer thinner for a few years. 

Time is limited.  

[Handy Don 16,588]

I was gifted the HF 2.5L at Christmas. I’ve cleaned three carbs and a few other things and I’m pleased.

 

It came with some cleaning powder that is caustic to aluminum so I’ve been using Simple Green Pro (the purple stuff) on anything aluminum.

 

One “oops” was forgetting I had a K181 carb “in the soup.” The machine turned itself off just fine, but I remembered it was there only three days later. The carb was clean as I’d hoped, but the “soup” had darkened the entire surface of the carb to resemble aged bronze!  I plate sanded the faces of the flanges and the regular aluminum color came right back. The aluminum bowl, however was its normal color--clearly different alloys reacting differently. Moral: Don’t forget to take stuff out and rinse it!

Edited 5 hours ago by Handy Don

[Brockport Bill 2,341]

how many minutes do each of you run the unit to get your item clean?

how many minutes can your machine operate in cleaning cycle before it times out and has to be re-started?  

thanks. Bill

[oliver2-44 11,478]

1. My cleaner has a 30 minute cycle. I typically run carbs 3  times. More on really dirty ones.  

Edited 38 minutes ago by oliver2-44