Carb Frustration

[pfrederi 20,325]

1 hour ago, wallfish said:

Is the little rubber O ring in the hole on the carb body for the low idle screw? Air sucking in there would be an issue

I didn't know there was an Oring??

[Handy Don 16,314]

33 minutes ago, pfrederi said:

I didn't know there was an Oring??

Yep. On the threaded part of the valve between the spring and the body.

Edited 3 hours ago by Handy Don

[ebinmaine 78,382]

35 minutes ago, pfrederi said:

I didn't know there was an Oring??

 

2 minutes ago, Handy Don said:

Yep. On the threaded part of the valve between the spring and the body.

 

 

Not on several of mine. 

[Handy Don 16,314]

2 minutes ago, ebinmaine said:

 

 

 

Not on several of mine. 

So far on both of the K181 #22s I’ve rebuilt.

Pesky little critters and NOT included in the rebuild kits. 

[ebinmaine 78,382]

3 minutes ago, Handy Don said:

So far on both of the K181 #22s I’ve rebuilt.

Pesky little critters and NOT included in the rebuild kits. 

 

 

Interesting.  

[wallfish 19,763]

8 minutes ago, ebinmaine said:

 

 

 

Not on several of mine. 

You may not have noticed it.

It's usually stuck into the carb body hole and stays but dry rotted ones can fall out

[ebinmaine 78,382]

28 minutes ago, wallfish said:

You may not have noticed it.

It's usually stuck into the carb body hole and stays but dry rotted ones can fall out

 

 

I'll double check em

[pfrederi 20,325]

I thought the idle mixture screw felt a little loose maybe there was an o ring to snug it up.