Dimensions needed for Mid Mount Grader Blade Bracket

[BradKahler 254]

I'm building a mid mount grader blade for my B80 and I've found a lot of information but I'm lacking a couple of dimensions and an angle.  Any chance one of you might have access to one of these and be willing to provide the needed information?

 

Thanks!  

 

Brad

 

 

[ebinmaine 77,975]

45 minutes ago, BradKahler said:

Any chance one of you might have access to one of these and be willing to provide the needed information?

 

 

 

 

 

 

We have a couple Mid Mount Grader Blades here. I can get you those measurements tomorrow. 

 

Have you seen the thread that shows the rest of the measurements? 

 

 

 

[BradKahler 254]

34 minutes ago, ebinmaine said:

 

 

We have a couple Mid Mount Grader Blades here. I can get you those measurements tomorrow. 

 

Have you seen the thread that shows the rest of the measurements? 

 

 

Yes, I found a thread that had most dimensions but I wasn't comfortable trying to figure out the angle.  I used several different images I found and the camera angle seems to distort the angle enough that each image comes up with different angle.

 

Thanks, any help would be appreciate. 

[DLF 0]

The pivot is mounted at 90 degrees to the frame. That angle is determined by the angle the blade is attached to the pivot.

I don't have factory blade to measure. The factory mounted to the top angle of the blade that gave the angle.

Go down to " wheel Horse Manuals" and look up 40" grader blade. It gives good pictures.

 

[BradKahler 254]

3 hours ago, DLF said:

The pivot is mounted at 90 degrees to the frame. That angle is determined by the angle the blade is attached to the pivot.

I don't have factory blade to measure. The factory mounted to the top angle of the blade that gave the angle.

Go down to " wheel Horse Manuals" and look up 40" grader blade. It gives good pictures.

 

 

I agree, the parts manual appears to show what would be a 90 mounting.  I even found one picture that sort of gives that impression.  However, I've found several others t hat are distinctly not 90 degrees to the mounting arm.  Needless to say it's very confusing.