gt14rider 1,068 #1 Posted 5 hours ago (edited) Hi all, started working on my 856, ended up rebuilding the engine and while waiting for parts started working on steering, lots of slop. Pulled tie rods, steering wheel and shafts. Front of frame was wollowed and shaft end worn. Steering block got two bushings and steering wheel shaft cleaned up, installed upper dash bushing, reinforced bushing with steel puddy and new lock collar. Ordered hiem joints for tie rods and will machine new rods when I get parts. Don't forget the green high temp grease. Edited 5 hours ago by gt14rider More pics 1 9 Share this post Link to post Share on other sites
ri702bill 11,523 #2 Posted 5 hours ago I did similar... With the need to counterbalance the mass... 1 1 Share this post Link to post Share on other sites
parsonsponyz 303 #3 Posted 5 hours ago Nice job, looks like it will be good for 65 MPH. 1 Share this post Link to post Share on other sites
