C-160 Automatic Kohler 10hp 48" Mower Deck

[mhvond 1]

New to Wheel Horse.  I understand the 10hp is not enough to properly power the 48" mower deck. With that said I see my options as 1) swap to a 42" mower deck or 2) swap in a 16hp Kohler.

 

Am I missing anything?

[Easton Rich 1,069]

What model do you have? If its a B or C-Series a deck swap would be simpler, but if you wanted, a 16hp swap wouldn't be too difficult.

[mhvond 1]

39 minutes ago, Easton Rich said:

What model do you have? If its a B or C-Series a deck swap would be simpler, but if you wanted, a 16hp swap wouldn't be too difficult.

 

Wheel Horse C-160 Automatic w/ Kohler 10hp and 48" Mower Deck

[Easton Rich 1,069]

I'd first swap the deck, it'll take 20-30mins, but if you want more power a engine swap wouldn't be hard depending on tools, equipment, etc.

[mhvond 1]

1 minute ago, Easton Rich said:

I'd first swap the deck, it'll take 20-30mins, but if you want more power a engine swap wouldn't be hard depending on tools, equipment, etc.

Thanks.

 

Now searching for a 42" deck

[kpinnc 17,470]

1 hour ago, mhvond said:

I understand the 10hp is not enough to properly power the 48"

 

I've used a 48 with a 10hp several times. 

 

More hp is always better but unless you're cutting very heavy grass your 10hp will be fine. Will it struggle in some places? Probably, but it will work if you slow down. 

 

 

[mhvond 1]

8 minutes ago, kpinnc said:

 

I've used a 48 with a 10hp several times. 

 

More hp is always better but unless you're cutting very heavy grass your 10hp will be fine. Will it struggle in some places? Probably, but it will work if you slow down. 

 

 

Mowed for the first time yesterday, no speed, constant bogging, uneven cut

[JCM 10,934]

I have mowed with both a 312-8 and a 310-8 . As long as you cut dry grass at the correct adjustment height and the grass isn't ridiculously tall you should be fine. I never really noticed a big difference between either model mowing with both of the engines being Kohler Magnums. However I would suggest the 42'' side discharge. Just my experiences.

[sqrlgtr 2,295]

1 hour ago, mhvond said:

Wheel Horse C-160 Automatic

 

I would swap a k341 back in, especially if you had one. I believe a Magnum series motor would swap in easy also. Might cost little more to start with, but I know I would be more satisfied. Saying all that I've had pretty good luck mowing with the 10/12hp k series and Magnums through the years but with 42" deck or smaller.

[ebinmaine 77,705]

24 minutes ago, sqrlgtr said:

 

I would swap a k341 back in, especially if you had one. I believe a Magnum series motor would swap in easy also. Might cost little more to start with, but I know I would be more satisfied. Saying all that I've had pretty good luck mowing with the 10/12hp k series and Magnums through the years but with 42" deck or smaller.

 

 

@kpinnc or @953 nut might know the availability better down there. I'm under the impression that a 16 HP in NC is rare as hen's teeth.  

 

A Magnum would hit the hood on a C series.  

 

 

 

[mhvond 1]

25 minutes ago, ebinmaine said:

 

 

@kpinnc or @953 nut might know the availability better down there. I'm under the impression that a 16 HP in NC is rare as hen's teeth.  

 

A Magnum would hit the hood on a C series.  

 

 

 

My focus will be to trade out my 48" rebuilt deck for a clean 42" .  Tractor Parts Yard has one for $250

Edited 1 hour ago by mhvond

[pfrederi 20,038]

22 minutes ago, ebinmaine said:

 

 

@kpinnc or @953 nut might know the availability better down there. I'm under the impression that a 16 HP in NC is rare as hen's teeth.  

 

A Magnum would hit the hood on a C series.  

 

 

 

 

 

Nt really a problem.  take off teh big Plastic shroud and put on a old fashioned round A/C cover.