Jump to content
mhvond

C-160 Automatic Kohler 10hp 48" Mower Deck

Recommended Posts

mhvond

New to Wheel Horse.  I understand the 10hp is not enough to properly power the 48" mower deck. With that said I see my options as 1) swap to a 42" mower deck or 2) swap in a 16hp Kohler.

 

Am I missing anything?

Share this post


Link to post
Share on other sites
 
Easton Rich

What model do you have? If its a B or C-Series a deck swap would be simpler, but if you wanted, a 16hp swap wouldn't be too difficult.

Share this post


Link to post
Share on other sites
 
mhvond
39 minutes ago, Easton Rich said:

What model do you have? If its a B or C-Series a deck swap would be simpler, but if you wanted, a 16hp swap wouldn't be too difficult.

 

Wheel Horse C-160 Automatic w/ Kohler 10hp and 48" Mower Deck

Share this post


Link to post
Share on other sites
 
Easton Rich

I'd first swap the deck, it'll take 20-30mins, but if you want more power a engine swap wouldn't be hard depending on tools, equipment, etc.

Share this post


Link to post
Share on other sites
 
mhvond
1 minute ago, Easton Rich said:

I'd first swap the deck, it'll take 20-30mins, but if you want more power a engine swap wouldn't be hard depending on tools, equipment, etc.

Thanks.

 

Now searching for a 42" deck

  • Like 1

Share this post


Link to post
Share on other sites
 
kpinnc
1 hour ago, mhvond said:

I understand the 10hp is not enough to properly power the 48"

 

I've used a 48 with a 10hp several times. 

 

More hp is always better but unless you're cutting very heavy grass your 10hp will be fine. Will it struggle in some places? Probably, but it will work if you slow down. 

 

 

  • Like 1

Share this post


Link to post
Share on other sites
 
mhvond
8 minutes ago, kpinnc said:

 

I've used a 48 with a 10hp several times. 

 

More hp is always better but unless you're cutting very heavy grass your 10hp will be fine. Will it struggle in some places? Probably, but it will work if you slow down. 

 

 

Mowed for the first time yesterday, no speed, constant bogging, uneven cut

Share this post


Link to post
Share on other sites
 
JCM

I have mowed with both a 312-8 and a 310-8 . As long as you cut dry grass at the correct adjustment height and the grass isn't ridiculously tall you should be fine. I never really noticed a big difference between either model mowing with both of the engines being Kohler Magnums. However I would suggest the 42'' side discharge. Just my experiences.

20220820_071201.jpg

  • Like 1

Share this post


Link to post
Share on other sites
 
sqrlgtr
1 hour ago, mhvond said:

Wheel Horse C-160 Automatic

 

I would swap a k341 back in, especially if you had one. I believe a Magnum series motor would swap in easy also. Might cost little more to start with, but I know I would be more satisfied. Saying all that I've had pretty good luck mowing with the 10/12hp k series and Magnums through the years but with 42" deck or smaller.

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...