kpinnc 17,760 #26 Posted April 4 Not much- But finally got time to get the second front wheel done today. Gonna be a meaty front end on this tractor! 5 Share this post Link to post Share on other sites
kpinnc 17,760 #27 Posted April 4 Just for giggles I set the axle assembly in front of the 523H. Surprised to see this is about two inches wider than the swept axle with 8 inch front wheels and trailer hubs on it. Definitely gonna have a wide track. I was going for that, but didn't realize it was this wide... 2 4 1 Share this post Link to post Share on other sites
kpinnc 17,760 #28 Posted 2 hours ago Got my donor wheels together for the rear. I don't have any more wide rears so I'm gonna have to make a set from two different pairs. The pair with the surface rust has a way wrong offset. They came from a Ford LGT. The tires on Ford pair would not break loose at the bead, even though they were clean. I had to use a 3 foot 2x6 and the weight of the Tundra to break them. Hopefully I can gain another skinny pair of wheels using these as well. We will see... Share this post Link to post Share on other sites
