2026 Big Show Buy/Sell/Trade Thread

[squonk 46,783]

 Starter for the 8HP small blocks. Tested    $ 40

 

Edited Saturday at 08:15 PM by squonk

[WHX?? 56,812]

Set of rear Bolens weights $100

Edited Saturday at 10:16 PM by WHX??

[WHX?? 56,812]

Really nice pair of 6-12 ags. 6 Ply & NIB never been mounted. They do run tall. $180.00

 

Also have 6-12 rims. Best pair for $80.00 INCLUDES FREE VALVE STEMS!!!!! 

$50 for one go buy your own damn valve stem... 

Edited Sunday at 01:20 AM by WHX??

[WHX?? 56,812]

 

On Sale!!! $400.00  $300.00

Working Man's 856. Fine fine steed that is ready to work. A real chick magnet.  Pulled a plow nicely at plow day. Patina to die for.  New to check list, some updated wiring, fluids changed, new shifter boot, new petcock, new carb & throttle cable. Good battery.  Lots of TLC done. Left rear tire leaks air but very slowly. Service K181 runs great. Right rear hub a bit to wonder at but holds tight. If you wanna get fussy I'll throw in a good hub for a extra Jackson. No extra charge  for broken in saddle. 

 

Edited Sunday at 01:22 AM by WHX??

[Pullstart 70,055]

@WHX?? you swap a good hub on there and I’ll take that funky one off your hands free!  

[Docwheelhorse 2,930]

Morning everyone... anybody need this LT1137 5 speed? Motor is missing coil and I think rod is snapped. Has a good cone clutch PTO and good trans. Im keeping headllight bulbs if they work and seat bracket with springs. Deck is decent, blades are good. Ill haul to show for $50...

Let me know your thoughts. Trades for horizontal shaft stuff considered and espescially Briggs stuff.

I have a blown up craftsman transaxle with better rear rims and tires Ill throw in.

 

Yes its the "platinum" paint color and yes mower bagger bracks are on back

 

Tony

(860)978-9039

 

 

 

Edited Sunday at 01:18 PM by Docwheelhorse
Added pic

[WHX?? 56,812]

10 hours ago, Pullstart said:

I’ll take that funky one off your hands free!

You been in that side room in the shop again?!?!?

[Pullstart 70,055]

@Docwheelhorse. Dual exhaust?  

 

[Easton Rich 1,245]

Pure Performance. 

[squonk 46,783]

On 3/5/2026 at 9:20 AM, WHX?? said:

 

 

Well if knuckle heads like you would stick to the topic ... 

     

[Docwheelhorse 2,930]

1 hour ago, WHX?? said:

You been in that side room in the shop again?!?!?

Well... I know there are guys running these mowers. So... if you need a trans or a deck or a "thingy" its gotta be worth something ti haul to show 400 miles right? I started at $50... make an offer. But im not hauling it for free... tyeres several universal wheel horse parts that I could pull and sell. Like the steering wheel... I just dont have time at moment. Plus I was thinking somebody may want to build a racing go cart mower out of it

[Handy Don 16,737]

16 hours ago, WHX?? said:

Fascinating adaptation of a sprocket to a wheel hub!

[Razorback 1,337]

6 minutes ago, Handy Don said:

Fascinating adaptation of a sprocket to a wheel hub!

Was that  a past repair of some sort? Or did it actually drive something with a chain?

[WHX?? 56,812]

1 hour ago, Handy Don said:

Fascinating adaptation of a sprocket to a wheel hub!

 

1 hour ago, Razorback said:

Was that  a past repair of some sort? Or did it actually drive something with a chain?

Buy the tractor I'll tell ya ...

Just a farmer fix. 

Edited Sunday at 06:49 PM by WHX??

[stevebo-(Moderator) 8,640]

I believe this is an RJ vintage cart LTD-24 model. Overall decent shape. Not sure if tires hold air never tried. $175?

[Razorback 1,337]

6 hours ago, WHX?? said:

 

Buy the tractor I'll tell ya ...

Just a farmer fix. 

Looks like it could drive a planter….. or, who-knows-what….

[OoPEZoO 596]

Working on my shopping list for this year and more than a few things I wouldn't mind clearing out of the shop.  I'll be at the show on Friday, but live close enough to make other arrangements if need be.  Shoot me a message if anyone is interested, glad to take pics if needed.

 

Want list

Spare mule drive

decent trip edge springs for my snow plow

new 48" plow edge

right side anti-scalp wheel bracket for the front of an old 48" deck I'm rehabbing

decent seat for a RJ58

5xi plow frame

 

Sell or trade bait

RM 3261 mower deck that was on my RJ.  Its complete, but rusted solid.  Make an offer or willing to trade for anything useful to me

 

A box of double D spindles/parts for 48" decks (a few aluminum housings, set of good cast iron housings with the offset grease zerks, handful of DD pulleys 6756,6757) Willing to separate or sell as a lot

 

NOS set of (3) 6758 48" DD blades, 100202 is the set part number $75 (I have decided to part with them in favor of new 8Ten spindles/pulleys and don't have the heart to drill out the DD to a 3/4 hole on new blades)

 

79366 44" 2-stage snow thrower for a 5xi series that came off a tractor with only 230hrs on it $500 (or less if you come pic it up in 17584) little rust and paint faded, but complete and works well.  My property is set up better for plowing

 

That's all I can think of right now.....

Edited 9 hours ago by OoPEZoO

[JoeM 10,008]

I got this cream puff for $150 w/battery $125 without. Re-powered with Magnum 10, Smokes on startup, hydro is good and strong.

 

Also got his 20 Ton shop press converted to Air Cylinder. $175

 

 

[Blaine 20]

1 hour ago, OoPEZoO said:

Working on my shopping list for this year and more than a few things I wouldn't mind clearing out of the shop.  I'll be at the show on Friday, but live close enough to make other arrangements if need be.  Shoot me a message if anyone is interested, glad to take pics if needed.

 

Want list

Spare mule drive

decent trip edge springs for my snow plow

new 48" plow edge

right side anti-scalp wheel bracket for the front of an old 48" deck I'm rehabbing

decent seat for a RJ58

5xi plow frame

 

Sell or trade bait

RM 3261 mower deck that was on my RJ.  Its complete, but rusted solid.  Make an offer or willing to trade for anything useful to me

 

A box of double D spindles/parts for 48" decks (a few aluminum housings, set of good cast iron housings with the offset grease zerks, handful of DD pulleys 6756,6757) Willing to separate or sell as a lot

 

NOS set of (3) 6758 48" DD blades, 100202 is the set part number $75 (I have decided to part with them in favor of new 8Ten spindles/pulleys and don't have the heart to drill out the DD to a 3/4 hole on new blades)

 

79366 44" 2-stage snow thrower for a 5xi series that came off a tractor with only 230hrs on it $500 (or less if you come pic it up in 17584) little rust and paint faded, but complete and works well.  My property is set up better for plowing

 

That's all I can think of right now.....

I’ll bite on the deck. Rust is my favorite color. 

[fast88pu 3,377]

4 hours ago, OoPEZoO said:

Working on my shopping list for this year and more than a few things I wouldn't mind clearing out of the shop.  I'll be at the show on Friday, but live close enough to make other arrangements if need be.  Shoot me a message if anyone is interested, glad to take pics if needed.

 

Want list

Spare mule drive

decent trip edge springs for my snow plow

new 48" plow edge

right side anti-scalp wheel bracket for the front of an old 48" deck I'm rehabbing

decent seat for a RJ58

5xi plow frame

 

Sell or trade bait

RM 3261 mower deck that was on my RJ.  Its complete, but rusted solid.  Make an offer or willing to trade for anything useful to me

 

A box of double D spindles/parts for 48" decks (a few aluminum housings, set of good cast iron housings with the offset grease zerks, handful of DD pulleys 6756,6757) Willing to separate or sell as a lot

 

NOS set of (3) 6758 48" DD blades, 100202 is the set part number $75 (I have decided to part with them in favor of new 8Ten spindles/pulleys and don't have the heart to drill out the DD to a 3/4 hole on new blades)

 

79366 44" 2-stage snow thrower for a 5xi series that came off a tractor with only 230hrs on it $500 (or less if you come pic it up in 17584) little rust and paint faded, but complete and works well.  My property is set up better for plowing

 

That's all I can think of right now.....

I have an xi plow and possibly an rj seat

[wallfish 20,020]

6 hours ago, JoeM said:

I got this cream puff for $150 w/battery

Interested Joe. 

Gonna turn that into a field project tractor and find some tractorless kid to give it away to. Mostly courtesy of EB from his donation of a couple of tractors

[WHX?? 56,812]

 @parsonsponyz has dibs on but if he doesn't want it's fair game. $180.00

[JoeM 10,008]

27 minutes ago, wallfish said:

Gonna turn that into a field project tractor and find some tractorless kid to give it away to. Mostly courtesy of EB from his donation of a couple of tractors

If that what you’re doing, no problem, I’ll donate it to cause. No charge. 

[wallfish 20,020]

1 minute ago, JoeM said:

If that what you’re doing, no problem, I’ll donate it to cause. No charge. 

Or how about part of it? I'll explain the whole thing when I see you down there.

But yes that's the plan. Or maybe give it to WHCC to raffle off but only 16 yo and under can buy a ticket.

 

@Pullstart has a rear fender for it plus I'm sure he's up for some tinkering on it too

[JoeM 10,008]

15 minutes ago, wallfish said:

Or how about part of it? I'll explain the whole thing when I see you down there.

But yes that's the plan. Or maybe give it to WHCC to raffle off but only 16 yo and under can buy a ticket.

hey grab it and run with it, parts pieces all good 

be cool if someone could throw a set of rings in her!