2026 Big Show Buy/Sell/Trade Thread

[Ed Kennell 45,936]

 

 

 

The sound got lost on the video.    

1076 starts,,, runs, drives and mows.   tranny has a leak near the frame mount but feels strong, tires hold  deck has some rot but spindles seem good

tractor and deck = $300

short frame  42" plow with long down pressure link,  wear bar needs turned over to unused side.    $100

 Make an offer on all the small parts.

 

Edited May 8 by Ed Kennell

[adsm08 4,405]

4 hours ago, Ed Kennell said:

1076 starts,,, runs, drives and mows.   tranny has a leak near the frame mount but feels strong, tires hold  deck has some rot but spindles seem good

tractor and deck = $300

 

Ed, you are making me consider some bad decisions.

 

I just got rid of one to make space.

[953 nut 65,783]

6 hours ago, Ed Kennell said:

1076 starts,,, runs, drives and mows.   tranny has a leak near the frame mount but feels strong, tires hold  deck has some rot but spindles seem good

tractor and deck = $300

Memo to myself;

        I am attempting to downsize but @Ed Kennell isn't making it easy.       

[stevebo-(Moderator) 8,625]

I have several senior attachments like snow plows and rear ground engagement plows I would be willing to drag down. Pics upon request. Prices would probably be around $400 each

[fast88pu 3,374]

Xi gas tank $50, xi rearend $150, 522xi machine minus engine and rear $500, 52" xi parts deck- all is good besides the shell $100, xi mower mule drive $100, 8 speed 1" rearend- needs an axle seal $100, older 4 speed rearend with hubs and sleeve hitch $100, eaton 1100 rearend $150, 36" early style deck with extra blades $100, 42"sd deck- no rot spins well $150, mule drives $20ea specify which you want. All can be brought to show with prior arrangement and larger items a deposite. Kyle 845 591 7317 

Edited Sunday at 01:55 PM by fast88pu
Forgot photos

[evanloock 254]

On 5/9/2026 at 6:23 AM, stevebo said:

I have several senior attachments like snow plows and rear ground engagement plows I would be willing to drag down. Pics upon request. Prices would probably be around $400 each

PM sent.

[squonk 46,356]

Pair of solid iron discs that fit 12" wheels. 37 lbs. each   $75.00

 

[702854boy 726]

Would anyone have the three lug rims for a lawn ranger?, and the tread type pictured below but in a 16-6.50/8 size?

[Handy Don 16,457]

See classified vendors at the top of the page. Call AtoZ and/or K&B horse parts. 

[PWL216 1,202]

Ag tires. Both have good tread, one has a very slow leak. You might have to put air in it once a season. I’ve had these on my tractor for three years and swapped them out for bigger turf tires. Selling these for $40.

 

SOLD

Edited Monday at 11:45 PM by PWL216

[pfrederi 20,455]

any interest in 

Early Front mule drive setup bearings are good $20 

 

 

 

 

[pfrederi 20,455]

Free to a good home

Seized Hydro pump may be good for some parts never use it been the shelf for 20 yrs

 

Collection of old mower deck drive pulleys

 

 

[squonk 46,356]

@pfrederi Paul I'll take that pump

[wallfish 19,904]

2 hours ago, pfrederi said:

Collection of old mower deck drive pulleys

I'm interested in all of those pulleys and bars etc

[adsm08 4,405]

7 hours ago, pfrederi said:

any interest in 

Early Front mule drive setup bearings are good $20 

 

 

 

 

 

What years/models does that work with?

[pfrederi 20,455]

5 hours ago, squonk said:

@pfrederi Paul I'll take that pump

It yours

 

[pfrederi 20,455]

58 minutes ago, adsm08 said:

 

What years/models does that work with?

It came on Charger Electro and Raiders it will fit I believe on any long frame.It was the first front mount mule drive but only for a short period before they got the front tachmatic.  Lots of steel involved.  Really best for some one who wants a period correct unit for a restoration.  

[pfrederi 20,455]

5 hours ago, wallfish said:

I'm interested in all of those pulleys and bars etc

You want them all they are yours... I may keep one of the RM deck front bars

[702854boy 726]

Would anyone want to trade me a 5 hole snow plow blade quadrant for a three hole one?

[rmaynard 17,145]

9 hours ago, 702854boy said:

Would anyone want to trade me a 5 hole snow plow blade quadrant for a three hole one?

I have a quadrant out in the shop. Can't remember if it's a 5 or a 3. I'll let you know.

[pfrederi 20,455]

Item 1:   $250 negotiable

Any interest in 60" finish mower for a D series.  Bought it years ago went over it new seals a couple new bearings belt etc,  But my D would over heat the tranny.  So I put it under a bench.  By the time I overhauled the D200 hydro I had gotten a finish mower for my Case VAC so this deck has sat for many years in the shop. It is complete with PTO shaft and coupler and leveling chains. There is a small pies of side guard missing.  Flat steel would be easy to fabricate.  Didn't really affect mowing performance.

 

Item 2:  $35

Complete NOS snowblower..79261  for a vertical shaft WH.  It has every thing you need to convert your short chute to a tall one.  (you may have to modify the support pole for the crank handle. Offered this last year for sale no takers.  I couldn't bring myself to scrap it.  Some nice pulleys and other stuff you might find a use for ...but you have to take the whole thing (If you scrap it that is OK) 

 

 

[fast88pu 3,374]

6 minutes ago, pfrederi said:

Item 1:   $250 negotiable

Any interest in 60" finish mower for a D series.  Bought it years ago went over it new seals a couple new bearings belt etc,  But my D would over heat the tranny.  So I put it under a bench.  By the time I overhauled the D200 hydro I had gotten a finish mower for my Case VAC so this deck has sat for many years in the shop. It is complete with PTO shaft and coupler and leveling chains. There is a small pies of side guard missing.  Flat steel would be easy to fabricate.  Didn't really affect mowing performance.

 

Item 2:  $35

Complete NOS snowblower..79261  for a vertical shaft WH.  It has every thing you need to convert your short chute to a tall one.  (you may have to modify the support pole for the crank handle. Offered this last year for sale no takers.  I couldn't bring myself to scrap it.  Some nice pulleys and other stuff you might find a use for ...but you have to take the whole thing (If you scrap it that is OK) 

 

 

Interested in the snowblower

[pfrederi 20,455]

15 minutes ago, fast88pu said:

Interested in the snowblower

You want it it's yours.

[fast88pu 3,374]

42 minutes ago, pfrederi said:

You want it it's yours.

Sounds good $35. Pm me

[Handy Don 16,457]

21 hours ago, wallfish said:

I'm interested in all of those pulleys and bars etc

Can you spare one of the mid-hitch side/under PTO’s for me?