Ed Kennell 44,181 #26 Posted 5 hours ago 43 minutes ago, sqrlgtr said: Just wondering how the rubber chains do going out the side of a hill? I remember thinking someone told me they didn't do so well going out the side of a hill and that is the reason for me sticking with the vee bar steel chains. IDK if there is anything to that because Ive never tried the rubber type . I think it was @lynnmor that mentioned that. I don't have to plow on a side hill, but i'm sure the rubber straps would not offer much side traction. 1 1 Share this post Link to post Share on other sites
lynnmor 8,418 #27 Posted 5 hours ago 45 minutes ago, sqrlgtr said: Just wondering how the rubber chains do going out the side of a hill? I remember thinking someone told me they didn't do so well going out the side of a hill and that is the reason for me sticking with the vee bar steel chains. IDK if there is anything to that because Ive never tried the rubber type . I mentioned that on here. Side to side you are riding on rubber toboggans, I have a short and steep section that I did a 180 on the first time. I learned to do that first by plowing downhill and returning up the other side. 1 1 Share this post Link to post Share on other sites
Racinbob 12,518 #28 Posted 5 hours ago 1 hour ago, sqrlgtr said: That's where I was looking. I mis understood and thought you had ordered from terra grip. I appreciate the spec chart you posted above that helps tremendously. Nah! You didn't misunderstand. I thought I got them at TerraGrip too. I had to go back and check. 1 Share this post Link to post Share on other sites
Alrashid2 435 #29 Posted 4 hours ago You guys are awesome. Really great discussions here!! I think I've ultimately decided that I'll wait until I blow one of these old dry rotted tires... at that point I can decide what tire I want to get, and most likely choose one of the ones discussed here and from there, see how it does compared to my current turf savers - maybe I won't need chains at all? And if I still do, then I'll buy the rubber chains that fit the new tires exactly, since I know regardless I'll be buying new sized tires since my size isnt readily available anymore. Appreciate you all! Great discussion. I'm sure I'll come back to this post in the new year or so and make a decision 1 Share this post Link to post Share on other sites
sqrlgtr 1,895 #30 Posted 2 hours ago 3 hours ago, lynnmor said: I mentioned that on here. Side to side you are riding on rubber toboggans, I have a short and steep section that I did a 180 on the first time. I learned to do that first by plowing downhill and returning up the other side. I thought I had seen that on here before. I have to go out the side of hills a lot around. I still might try to make a set up I know it would be easier on the pavement and concrete. Share this post Link to post Share on other sites
JoeM 9,444 #31 Posted 55 minutes ago Clean Machines and those weight boxes are the ticket for traction too! 1 Share this post Link to post Share on other sites
pfrederi 19,544 #32 Posted 28 minutes ago 25 minutes ago, JoeM said: Clean Machines and those weight boxes are the ticket for traction too! Nice looking machines...But I have never seen any correlation between snowplowing.Blowing ability and tractor cleanliness 1 Share this post Link to post Share on other sites
Ed Kennell 44,181 #33 Posted 24 minutes ago 2 minutes ago, pfrederi said: correlation between snowplowing.Blowing ability and tractor cleanliness A clean polished blade and blower chute is a good thing. 1 Share this post Link to post Share on other sites
Brockport Bill 2,179 #34 Posted 9 minutes ago like others, we here in the Hudson Valley of NY don't seem to have the same frequency or depth of snow storms as years ago -- i use the C175h with 48 plow for most clearing and occassionally when needed I have walk behind blower to do any deep build up of pushed back snow along sides of driveway from tractor plow. I have plowed over the years with just turf tires, sometimes with and/or without weights or chains ---- i did install the chains this winter --- but no weights. i have often thought of investing $$ in the "rubber" chains. This spring however I plan to have the asphalt driveway sealed so it will be very vulnerable to the steel chain scratches next winter - - certainly don't want chain marks after paying for nice seal job. I have slight slope on 75 ft driveway - but we all know once the plow blade has cleaned the snow almost bare on asphalt driveway traction is not a big need -- it is only on rare occassion i ever have the rear ties "spin" with no chains and just rubber treads - -but when i have steel chains i do get some spinning thus the scratch marks -- so we will see how this winter goes -- but maybe for next season the conversion will be wise after the asphalt gets sealed -- or i will just not put the chains on. Share this post Link to post Share on other sites