RoubaixRider 126 #1 Posted 18 hours ago (edited) Well, in between house projects for the wife, I’ve managed to get pretty deep into the disassembly on the C160. It’s crazy… I have not come across one single frozen bolt yet! Gotta love that. I sanded down the front of the frame, primer’d it and painted a little section to see what my paint choice looked like for once the other components all get ready for paint. I think I’m going to go with Sunrise Red Rustoleum. I painted the mower deck and fenders and seat pan that color back when I was just tinkering with the beginning of the restoration and I like the look of it. For the rims, I am thinking about Rustoleum Antique White. From what I’ve read here on the forummany of you guys have used it and it looks pretty good… That nice creamy off-white look almost like Ford Wimbledon white. lol, even though I’m a pretty confident Mechanic after all my experience with the case tractors, I have been videotaping the important segments of disassembly and labeling a lot of parts just to be safe. Best, Jason Edited 18 hours ago by RoubaixRider 4 3 Share this post Link to post Share on other sites
RoubaixRider 126 #2 Posted 17 hours ago It is now officially in two halves🤣 next step is going to be some serious cleaning and sanding/media blasting. I’m not going gangbusters on the sanding on this one… My hands took a real beating when I redid my CASE 444, so there’s going to be a lot of media blasting work done on this one. J 3 2 Share this post Link to post Share on other sites
ri702bill 10,582 #3 Posted 16 hours ago Nice! Do check for rust & cracks on the "F" plate of the frame - particularly around the four Underlive mounting holes.... If there is an issue, NOW is the time to fix it right. 3 1 Share this post Link to post Share on other sites
kpinnc 16,217 #4 Posted 16 hours ago 1 hour ago, RoubaixRider said: Ford Wimbledon white. Used that on my 867. Looks really nice! 1 3 Share this post Link to post Share on other sites
MainelyWheelhorse 2,251 #5 Posted 14 hours ago (edited) @RoubaixRider looks like you’re off to a good start. As far as I know there really isn’t a set color for any of the parts. I used an easily available red too. I used IH red, on all my tractors. It makes it easier to match later and saves on paint as one can covers all of them if touching up. Edited 14 hours ago by MainelyWheelhorse 1 Share this post Link to post Share on other sites
sqrlgtr 1,344 #6 Posted 13 hours ago (edited) I'm a Rustoleum Regal Red and Canvas White fan myself just because they are so readily available to me. I have been thinking about going to the IH Red but undecided. Sometimes it looks better to my eye then sometimes the Regal looks better, sometimes it looks exactly the same. BTW look like your off to a good start. Edited 13 hours ago by sqrlgtr Share this post Link to post Share on other sites
sqrlgtr 1,344 #7 Posted 13 hours ago I see @ri702bill already mentioned this but do check F plate be easy fix right now. @kpinnc what shade of red is on your 867? Share this post Link to post Share on other sites
kpinnc 16,217 #8 Posted 11 hours ago 2 hours ago, sqrlgtr said: @kpinnc what shade of red is on your 867? Shucks I don't remember. That was automotive (Dupont Imron) paint and 20 years ago. I'll dig around and let you know. Share this post Link to post Share on other sites