Rucan 5 #1 Posted August 5 Need to change the starter on my 414-8 m14 starter replacement. Any tips on the simplest way? Do I have to remove side panel? Do I have to remove the oil dipstick to get the starter out? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,612 #2 Posted August 5 Can not answer your question but do know where you can find manuals. https://www.wheelhorseforum.com/search/?q=M14S-601524&quick=1&type=downloads_file Share this post Link to post Share on other sites
953 nut 61,082 #3 Posted August 5 7 hours ago, Rucan said: Need to change the starter on my 414-8 m14 starter replacement. Any tips on the simplest way? Do I have to remove side panel? NO Do I have to remove the oil dipstick to get the starter out? YES Share this post Link to post Share on other sites
Ed Kennell 42,505 #4 Posted August 5 Removing starter on WH 312-8 - Wheel Horse Electrical - RedSquare Wheel Horse Forum Please read the above thread before removing your starter. to the Share this post Link to post Share on other sites
pfrederi 18,812 #5 Posted August 5 Make sure you keep the end caps in place with tape or something... Share this post Link to post Share on other sites
Wvtroutbum81 279 #6 Posted September 12 Is there a rebuild kit available for M series starters? Share this post Link to post Share on other sites
953 nut 61,082 #7 Posted September 12 9 hours ago, Wvtroutbum81 said: Is there a rebuild kit available for M series starters? There are lots of kits available on the internet. You need to figure out what parts need replacement before you buy. Lots of good information in this thread by @stevasaurus, read it before you jump in the deep end. 1 Share this post Link to post Share on other sites
