2025 Big Show Buy/Trade/Sell Thread

[hcminis 1,676]

I’ll have this fairly nice 1642 at the show.  I’d like to have $750.00 for it.  Runs and drives good.  New carburetor and fuel pump.  
 

Make a reasonable offer.  Least I can say is no. Could be open for round hood trades as well

[Pullhosen’s Pony Express 73]

2 hours ago, Lane Ranger said:

Kevin I will show you at the show a neat way to modify the RJ bracket to fit your 702!  

do you have hardware for it too, or what bolts do I need to mount a weight up there?

[fast88pu 3,364]

16 hours ago, WHX?? said:

I'll take one Fast88

Pm me please so I can get your info for at the show

[Lane Ranger 11,246]

53 minutes ago, Pullhosen’s Pony Express said:

do you have hardware for it too, or what bolts do I need to mount a weight up there?

 Just 3/8 1 inch bolts and a long bolt for the hole in the bottom of your weight.   You have to make sure the long bolt is set so the nut or bolt head does not hit the bottom of your hood! 
 

 

Edited Monday at 03:26 PM by Lane Ranger

[Lane Ranger 11,246]

On 6/4/2025 at 9:54 PM, 702854boy said:

If anyone would have a random assortment of 61-64 implements that they'd be willing to give up send me photos of what you've got so i can see if it would be anything i want please.

 

Rodney Burger is bringing two implements.  An 18 tooth drag harrow and a two piece cultivators set.

 

They will be at Land Ralph’s Canopy Thursday thru Saturday!

 

The  harrow is new and priced at $200 .

 

The two pics cultivator set is priced at $175. 

.

 

Both implements ( harrow and cultivator set) can be purchased for $325. 

 

 

 

!I only have one picture!   The harrow has not been used and was still in a box a couple years ago! 

 

 

 

Edited Monday at 04:26 PM by Lane Ranger

[Lane Ranger 11,246]

Nice set of of Silvertown. Sawtooth tred tires for $150 at the Big Show.  
 

see at Lane Ralph's canopy on Thursday ,, Friday, Saturday until sold!

 

 

Edited Monday at 06:30 PM by Lane Ranger

[Lane Ranger 11,246]

A rare , rare item is coming to the Big Show and will be for sale in Lane Ralph’s canopy on Thursday!

 

Rodney Burger is bringing from Florida an RJ 35 hood!  

You will need to see Rodney (lawnman_56) for the pricing! 
 

In addition,  an RJ reverse pulley (still on a motor). Will be sold for $400.

 

 

 

[Handy Don 13,679]

1 minute ago, Lane Ranger said:

In addition,  an RJ reverse pulley (still on a motor)

Please school us--what is a “reverse pulley”?

[Lane Ranger 11,246]

20 hours ago, Handy Don said:

Please school us--what is a “reverse pulley”?

 

Richard (953) described it well:

 

The engine pulley on the RJ-35 has a brass ring embedded into it that contacts the variable speed pulley causing it to rotate backward, that is how you go in reverse. There is a member here who has reproduced them from time to time, if you place a "Wanted" ad in the classified section he may have one left.

 

 

Joe Papke in Michigan was still making some of these a couple years ago!

 

 

more on RJ 25 and RJ 35 :

 

gwest_ca

1,726 posts · Joined 2008

#2 · Feb 23, 2012

There is an RJ-25 and an RJ-35 with the 2 and 3 describing the approximate engine horse power.

The RJ-25 may have been built 1955-56 using Briggs & Stratton Model 8 2-1/2hp

The RJ-35 was sold in 1955 using Kohler 3.6hp K90-27107D with a Schnacke recoil or Clinton 3.6hp B1200-152 3.6hp

1956 used Kohler 3.6hp K90-27107D with a Schnacke recoil or Clinton 3.6hp B1200-152, B1200-184, B1200-2184. Late 1956 with Clinton 1200-2184 used Fairbanks-Morse recoil. Clinton 1200-152 and 1200-184 used Schnacke recoil

1957 used Kohler 3.6hp K90-27107D with a Schnacke recoil or Clinton 3.6hp B1200-2184. Early 1957 with Clinton 1200-2184 used Fairbanks-Morse recoil

This is from notes I have kept from the more knowledgeable.

You can download the manual from the Files of
http://groups.yahoo.com/group/wheelhorsetractormanuals/
named
Tractor 1955-57 Ride-Away Jr.pdf

I believe they did have a reverse. It may have been a brass disc that ran against one of the pulleys. 

Garry

 

 

 

Edited yesterday at 01:29 PM by Lane Ranger

[Pullstart 65,732]

551 Suburban, as seen in the pictures!  Hub caps, original front tires, cast foot rests and all.  Older repaint, runs and drives well.

 

$750

 

SOLD!

 

I’ll be hauling this to the show regardless.

 

 

 

 

 

Edited Monday at 10:16 PM by Pullstart
More detail

[sqrlgtr 625]

2 hours ago, Lane Ranger said:

 

Rodney Burger is bringing two implements.  An 18 tooth drag harrow and a two piece cultivators set.

 

They will be at Land Ralph’s Canopy Thursday thru Saturday!

 

The  harrow is new and priced at $200 .

 

The two pics cultivator set is priced at $175. 

.

 

Both implements ( harrow and cultivator set) can be purchased for $325. 

 

 

 

!I only have one picture!   The harrow has not been used and was still in a box a couple years ago! 

 

 

 

I will take 2 piece cultivators if no one spoken for them.

[hcminis 1,676]

Have a local collector here in Indiana looking for a D series PTO shaft and coupler if anyone has it available. 

[Lane Ranger 11,246]

56 minutes ago, sqrlgtr said:

I will take 2 piece cultivators if no one spoken for them.

one ahead of you!

 

[Bow_Extreme 549]

On 6/13/2025 at 9:34 AM, stevebo said:

I am looking for 1 front wheel off a 520 with swept forward steering. Lmk if you have an extra. 

I'm pretty sure I have this.  Call or text me.

[Pullstart 65,732]

12 minutes ago, Bow_Extreme said:

I'm pretty sure I have this.  Call or text me.

 @stevebo I can haul 

[Pullstart 65,732]

Good running C-160 Hydro for sale!  AS PICTURED since the videos, this has been cleaned, seat swapped, and rear fender changed out as well.  Brand new battery today, 42” SD deck cuts well, hydro lift and low back Wheel Horse branded seat.  $650.  I’ve got it on the trailer and I don’t plan to bring it home!  I have a solid spare brake pedal zip ties to this as well.  I just ran out of time to swap it.

 

Edited Monday at 08:24 PM by Pullstart

[sqrlgtr 625]

@Pullstart sent u a pm on 551..

[WildHorses 401]

Snowco trailer $500 can deliver to the big show with down payment by Wednesday at 9am. I’m only bringing it someone wants to buy it. It needs lights and wiring repairs but is in great shape no big structural issues or rust. May need tires soon. Painted, new lights and tires this would be a show quality piece. Will only bring to the show for a buyer with at least a 50% deposit via PayPal, Venmo or Apple Pay. Feel free to ask for more pics. Tilts and works as it should. Has added fender height which can be easily removed.

[WildHorses 401]

I will be bringing 300/400 series steering shaft guards/covers, hydro lever knobs and square hood blockout inserts to the big show. Message me to put your name on one or find me at the big show. $30 for the steering shaft covers, $20 for the blockout plate with horse head, $10 for a set of hydro knobs.

Edited yesterday at 05:07 AM by WildHorses

[WildHorses 401]

Pull behind tiller $250 engine turns over but I have not tried to start it. Everything is there and it should function. 

[cafoose 3,437]

1 hour ago, WildHorses said:

I will be bringing 300/400 series steering shaft guards/covers, hydro lever knobs and square hood blockout inserts to the big show. Message me to put your name on one or find me at the big show. $30 for the steering shaft covers, $20 for the blockout plate with horse head, $5 for a set of hydro knobs.

@sqrlgtr Weren't you looking for these knobs?

[c-series don 9,784]

Electric lift, works as it should, just missing the switch $150 

[Ken B 3,175]

WANTED.. REALLY REALLY NICE 854. 

[Pullstart 65,732]

Another late entry - is anyone looking for a real nice 36” rear tiller?  Tines are probably 85% or more.  I’ve not seen one with tines this big.  Complete bolt in for C series or similar, from the mid mount tensioner, belt, axle hitch, loft assist spring, and such.  2 of 3 idlers are cast iron and good shape.  I will not haul it without interest first.

 

$425

 

 

SOLD!

 

 

Edited 22 hours ago by Pullstart
Photos

[sqrlgtr 625]

3 hours ago, cafoose said:

@sqrlgtr Weren't you looking for these knobs?

 

@cafoose yes but found the lever and all..