2025 Big Show Buy/Trade/Sell Thread

[rmaynard 16,200]

701 hood. $75.00 or best offer. Bought from Lane Ranger in 2023 for a project that never got off the ground. Metal is sound but rust pitted. 

[Lane Ranger 11,262]

On 6/16/2025 at 9:27 PM, Ken B said:

WANTED.. REALLY REALLY NICE 854. 

 

I will be bringing one !  Not sure I want to sell but you might talk me into it!  It’s a nice one .  Has lights, horn and Firestone sawtooth tires in back.  I will send you more pics after my wife goes to yoga and I can move it out! 
 

 

Edited yesterday at 01:19 AM by Lane Ranger

[Sparky-(Admin) 22,845]

16 hours ago, Pullstart said:

Good running C-160 Hydro for sale!  AS PICTURED since the videos, this has been cleaned, seat swapped, and rear fender changed out as well.  Brand new battery today, 42” SD deck cuts well, hydro lift and low back Wheel Horse branded seat.  $650.  I’ve got it on the trailer and I don’t plan to bring it home!  I have a solid spare brake pedal zip ties to this as well.  I just ran out of time to swap it.

 

 

 

 

 Dang, tempting 

[Lane Ranger 11,262]

Two Clinton Motor Desler Parts Manuals

 

large one $50

 

 

smaller one $40
 

 

Both at the Big Show in Lane Ralph’s Canopy!

 

 

[Lane Ranger 11,262]

first two pictures are of a 701 gas tank.  These are nice to have.

 

701 single piece gas tank for sale.  $60

 

*****
 

Good set of Goodyear ag tred 6/12 tires.  $175

 

 

Good 1054 side panel $25

 

 

RJ/Suburban center case  $50

 

 

 

 

Edited Tuesday at 10:57 PM by Lane Ranger

[S416-8 388]

D series scavenger hunt at the show:

 

Gas cap

Lift cylinder

D160 and 200 wiring harness (wish list and will probably be making them)

Seat(s)

hydro lines for rear 3-point lift

maybe a few more things as I did dig around... 

 

Let me know if you have some that you will be bringing.... 

[Pullstart 65,778]

17 hours ago, Pullstart said:

Another late entry - is anyone looking for a real nice 36” rear tiller?  Tines are probably 85% or more.  I’ve not seen one with tines this big.  Complete bolt in for C series or similar, from the mid mount tensioner, belt, axle hitch, loft assist spring, and such.  2 of 3 idlers are cast iron and good shape.  I will not haul it without interest first.

 

$425

 

 

last call for getting this one loaded 🤠

 

Original listing here

 

SOLD!

Edited Tuesday at 08:05 PM by Pullstart

[Bow_Extreme 550]

6 minutes ago, Pullstart said:

 

last call for getting this one loaded 🤠

 

Original listing here

 

 

Text Message Sent....

[Ken B 3,175]

7 hours ago, Lane Ranger said:

 

I will be bringing one !  Not sure I want to sell but you might talk me into it!  It’s a nice one .  Has lights, horn and Firestone sawtooth tires in back.  Tri ribs on front.   I will send you more pics after my wife goes to yoga and I can move it out! 
 

 

 

Edited Tuesday at 08:02 PM by Ken B
Need to let know I’m interested

[702854boy 66]

We have 2 fender pans and they are both five dollars. 

[hcminis 1,678]

I will have a front set of 6” hubcaps if anyone is interested.  Like to have $50.00 for them

[stevebo-(Moderator) 8,491]

Not a wheelhorse however figured I would put it out here. I have an offset gooseneck hitch and the curt anchor points for the puck system on a 2024 gmc Denali 1 ton. Pretty sure this fits most newer gm trucks with the puck system. They sell for $521 plus the curt anchor points ya and shipping. I would like to get $400 or trade for something of similar value..🤷

The hitch is brand new only had a trailer hooked to it to test fit. 

[Easton Rich 603]

I won't be at the show this year, but I was wondering if any of you had a one piece fuel tank that'd fit my 63' 653. If you've got something PM me! Thanks!

[Pullstart 65,778]

4 minutes ago, Easton Rich said:

I won't be at the show this year, but I was wondering if any of you had a one piece fuel tank that'd fit my 63' 653. If you've got something PM me! Thanks!

 @Lane Ranger posted one for a 701 $60

[Easton Rich 603]

@Lane Ranger I sent a PM

[Easton Rich 603]

Oh, thanks @Pullstart I must skipped over it lol

[Pullhosen’s Pony Express 82]

3 hours ago, 702854boy said:

We have 2 fender pans and they are both five dollars. 

I’ll take them both!  Pullhosen/Pullstart 

[702854boy 66]

5 minutes ago, Pullhosen’s Pony Express said:

I’ll take them both!  Pullhosen/Pullstart 

Ok

[Ken B 3,175]

I’m looking for a really nice mower deck in working condition for an 854

[ljsdad414 122]

SOLD
 

Last minute additions

ONE Wheel Horse cast front wheel weight.  Can bring with me to the show on Friday. 
 

$50.00

Also listed a 520H in the classifieds I have room for on the trailer.  

Edited yesterday at 03:40 PM by ljsdad414

[Bow_Extreme 550]

10 hours ago, ljsdad414 said:

Last minute additions

ONE Wheel Horse cast front wheel weight.  Can bring with me to the show on Friday. 
 

$50.00

Also listed a 520H in the classifieds I have room for on the trailer.  

 

I'll take that weight if you can get that to @Pullstart.  Please PM me on this.  Thanks!

 

 

[TT-(Moderator) 1,161]

These two xi's should be arriving mid-morning Friday the 20th. Also bringing at least one two-stage snowblower, and a couple repairable 48" decks - all for the xi models.

$1500⁰⁰ for the 2000 Indy Special Edition 522, and $950⁰⁰ for the "plain" 1998 522. Better snowblower is $350⁰⁰ and project/parts blower is $150⁰⁰. 48" decks are $200⁰⁰ each. Thanks!

[HyperPete 797]

On 6/16/2025 at 10:32 PM, sqrlgtr said:

 

@cafoose yes but found the lever and all..

 

 

Is that for the parking brake for a '73 hydro?  If so, how much, and I'm interested.

Thanks

 

[Lane Ranger 11,262]

items still available for sale at Lane Ralph’s canopy!

 

 

RJ Hood still available at The Big Show !  $. Sale price. $150!

 

Also nice Wheel Horse dump cart $150!

 

Early AC-7. Wheel Horse Cultivators $100

 

RJ tombstone weight Bracket. $45

 

[stevebo-(Moderator) 8,491]

I picked up a 520h roller from Joe. It has no motor but gear reduction steering complete. I propose a “deal”… I only want the gear reduction set up and all

steering components. If anyone is willing to do the work to take these off at the show including getting that roll pin out of the steering wheel they can have the rest of the machine free. The other deal I propose is selling outright for 325 to get my money back. I do not believe I will have room to haul it back as my boy picked up a few more project machines here than expected. 
I will post come pics later.