Got another one. A 416 this time.

[cleat 7,787]

Parking brake cam plate assembly ready to be installed.

 

Parking brake cam plate installed.

Pivot point was lightly greased.

 

[cleat 7,787]

Brake rod assembly ready to install.

 

Brake rod just inserted into parking brake cam and return spring installed.

Rod was greased where it inserts into cam plate.

 

Rod fully inserted into cam plate then washer and clip installed.

Note the smaller clip, the one shown earlier was causing interference with the cam plate bolt.

 

Brake return spring with rod fully installed into cam plate.

 

Brake spring and bolt assembly ready to install.

There should be 3 washers, only two are shown in this picture.

 

Brake spring assembly installed just finger tight.

I will set this later on when parking brake latch is installed.

 

Brake pedal ready to install.

 

Tractor ready to accept brake pedal.

 

Brake pedal installed.

 

Overview of complete brake system.