Simpson 260 Multimeter

[Marv 991]

I just acquired a 260 meter. There is a battery contact missing. Supposed to be 4. 2 for the D cell and 2 for the AA cell. I have not been able to find any contacts like the ones shown. Any ideas?

[lynnmor 8,091]

Maybe this website will help.  If you can find the attachment points wires could be soldered to the batteries.

[squonk 44,650]

Try Allied Electronics 

 

https://us.rs-online.com/?&gad=1&gclid=Cj0KCQjw06-oBhC6ARIsAGuzdw3nkJWOA96_e_hQEk2El1utPt-Csj62t2cipJAxlb2ltLHnfVwXNlYaAuatEALw_wcB&gclsrc=aw.ds

Edited September 21, 2023 by squonk

[Rick3478 445]

There are many variations of the 260.  Most of them take a "D" cell and a 9V.  Figure out what you actually have and get a reprint or PDF manual.

[Marv 991]

Lynnmore, Thanks for the website. That 260 series 5 is the one I have. I hope I do not have to solder to the battery, makes it messy to replace.

Squonk, Thanks for the suggestion. I am about 1/3 of the way through the Simpson listings on that site and so far haven't found the contact.

[Rick3478 445]

1 hour ago, Marv said:

Lynnmore, Thanks for the website. That 260 series 5 is the one I have. I hope I do not have to solder to the battery, makes it messy to replace.

Squonk, Thanks for the suggestion. I am about 1/3 of the way through the Simpson listings on that site and so far haven't found the contact.

 

I don't know anything about these people, or the quality, but apparently exists:

https://www.metersales.com/shop/42507-26127#attr=46985,167629,158047

 

[Marv 991]

On 9/21/2023 at 8:44 PM, Rick3478 said:

 

I don't know anything about these people, or the quality, but apparently exists:

https://www.metersales.com/shop/42507-26127#attr=46985,167629,158047

 

Thank you Rick. that sure fits the meter.

Marv