Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 03/29/2023 in Files

  1. 2 points

    Version 1.0.0

    469 downloads

    Thank you to Trina who once again killed it for our 2024 RedSquare Calendar

    Free

  2. 1 point

    1,584 downloads

    Operator manual #1-7245 IPL Wiring 16 pages 2.16MB - 1-7245 16 pages 1.88MB - 1-7245-P Dated 6/20/68 Wiring Color pdf 1 page 374KB 1-7245-P - Ammeter drawn in at the ignition switch Terminals on 8362 magneto ignition switch may not be identified 1 page 126KB 5955 Sundstrand hydro pump gasket nla - 102759 gasket should work Tractor drive belt # 7478 replaces # 4535 - (HB/5L x 84.22" or 5/8" x 84.22") PSB #084 #102 #104 #126 #127 #128 #134 #437B #12 20 pages 507.72KB Lube chart SS Details & Attachments 3 pages 115.75KB 1969 Electro 12 model 1-7245 - Uses Kohler K301S-47147c with breakerless magneto ignition 1969 serial numbers that have shown up for the 1-7245 521731 521757 542737 542883 542888 567538 587106 588402 598471 615059

    Free

  3. 1 point

    1,067 downloads

    Operator manual #A-5090 IPL Wiring 12 pages 2.01MB Wiring Color pdf 1 page 296KB Tractor drive belt for 857 #9691 - 1/2" x 70" Gates 6870 Napa 4L700W Starter/Generator belt Original Wheel Horse 1583 nla Used on 6, 7, 8hp Kohler Starter generator {3Lx33" in belt charts is 3/8" x 33" but some applications use a shorter belt. Belt should have raw rubber sides for grip.} 3V315 Gates .38"x31.5" 3V315 Napa .38"x31.5" Kohler #231605 Starter generator belt Replaces 232613 [.41"x32.08" 36 degree] PSB #061 Should use raw rubber edge belt for grip 7315 Gates .41"x32.08" 36 degree 25-7315 Napa .41"x32.08" 36 degree Small Block Kohler Napa # 25-7320 .41" wide x 32.5" long Side angle 36 degrees Cross section HC41 Original ignition switch 4988 replaced by 7263 No decal on belt guard. Indentation was dropped on 4993 guard in 1967 Last line of the parts list is missing Item 139 - 920127-4 Lockwasher 9/16 Item 186 - 6998 Decal Grille Lube chart SS Details & Attachments 3 pages 114.91KB 1967 model 857 1967 serial numbers that have shown up for the 857 266108 266307 266388 266526 266622 266896 266949 284035 284158 290859 290869 29116x 291215 306554 306723 306820 307114 307220 307426 307477 325035 325050 325396 325402 333992 336561 - Located in UK 336677 336700 336833 336998 372790 372875

    Free

  4. 1 point

    75 downloads

    IPL #3321-160 8 pages 256.66KB Fits 260-Series tractors Replaces earlier model 78260 106078 blade replaced by 106637 3-blade set (3/4" round hole) Mower Rotary 1998 48in SD model 78261 Serial 8900001-8999999 Mower Rotary 1999 48in SD model 78261 Serial 9900001-9999999 May be the same as New Holland deck Serial T5L0441 Component 9861904

    Free

  5. 1 point

    7,885 downloads

    Toro Service manual 55 pages 3.09MB Revised 1/95 Also used #810697R1 manual number Listed in 1989 518-H TIPL as #965-0762 JD Onan service manual 224 pages 3.04MB Onan P216G-I/10538A used in 1988 516-H model 31-16OE01 Onan P216G-I/10691B used in 1988 316-8 model B1-16O801 1989 316-8e model B1-16O802 1990 316-8e model R1-16O801 Onan P216G-I/10779B used in 1989 416-8 model 31-16O801 Onan P216G-I/10975D used in 1996 416-H model 73421 Serial 6900001-6999999 Onan P216G-I/10976C used in 1990 416-8 model 31-16O802 1990 416-H model 41-16OE01 1990 316-8e model R1-16O802 1991 416-8 model 31-16O803 Serial 1000001-1999999 1991 416-8e model R1-16O803 Serial 1000001-1999999 - No record at Toro - This is possibly a 316-8e - Engine may be wrong 1991 416-H model 51-16OE01 Serial 1000001-1999999 1992 416-8 model 31-16O804 Serial 2000001-2999999 1992 416-H model 51-16OE02 Serial 2000001-2999999 Onan P216G-I/10976D used in 1992 316-8e model R1-16O804 Serial 2000001-2999999 - (This may be a 416-8e) 1993 416-8 model 73420 Serial 3900001-3999999 1993 416-8e model 73440 Serial 3900001-3999999 1993 416-H model 73421 Serial 3900001-3999999 1994 416-8 model 73420 Serial 4900001-4999999 1994 416-8e model 73440 Serial 4900001-4999999 1994 416-H model 73421 Serial 4900001-4999999 1995 416-8 model 73420 Serial 5900001-5000614 - Mid-year change 1995 416-8e model 73440 Serial 5900001-5900222 - Mid-year change 1995 416-H model 73421 Serial 5900001-5901046 - Mid-year change Onan P216G-I/10976G used in 1995 416-8 model 73420 Serial 5900615-5999999 - Mid-year change 1995 416-8e model 73440 Serial 5900223-5999999 - Mid-year change 1995 416-H model 73421 Serial 5901047-5999999 - Mid-year change 1996 416-8 model 73420 Serial 6900001-6999999 1996 416-8 model 73422 Serial 6900001-6999999 1996 416-8e model 73441 Serial 69000001-69999999 1996 416-H model 73423 Serial 6900001-6999999 1997 416-8 model 73422 Serial 7900001-7999999 1997 416-8 model 73441 Serial 7900001-7999999 1997 416-H model 73423 Serial 7900001-7999999 Onan P218G-I/10539A used in 1988 518-H model 31-18OE01 - Mid-year change 1988 518-HE model E1-18OE01 1989 518-He model E1-18OE02 1990 518-He model R1-18OE01 1990 518-He model R1-18OE02 Onan P218G-I/10539B used in 1989 518-H model 31-18OE02 - Mid-year change Onan P220G-I/10540A used in 1988 520-H model 31-20OE01 Onan P220G-I/10540B used in 1989 520-H model 31-20OE02 Onan P220G-I/10541A used in 1988 520-HC model C1-20OE01 Onan P220G-I/10873A used in 1989 520-HC model C1-20OE02 Onan P220G-I/10955C used in 1991 520-H model 41-20OE02 Serial 1000001-1999999 1992 520-H model 41-20OE03 Serial 2000001-2999999 Onan P220G-I/10955D used in 1992 520-He model R1-20OE02 Serial 2000001-2999999 1993 520-H model 73501 Serial 39000001-39999999 1993 520-He model 73520 Serial 39000001-39999999 1994 520-H model 73501 Serial 49000001-49999999 1994 520-H model 73520 Serial 4900001-4999999 1995 520-H model 73501 Serial 59000001-59999999 1995 520-He model 73520 Serial 5900001-5900177 - Mid-year change Onan P220G-I/10955G used in 1995 520-He model 73520 Serial 5900178-5999999 - Mid-year change 1996 520-H model 73501 Serial 69000001-69999999 1996 520-H model 73502 Serial 6900001-6999999 1996 520-He model 73521 Serial 6900001-6999999 1997 520-H model 73502 Serial 7900001-7999999 1997 520-H model 73521 Serial 7900001-7999999 Onan P220G-I/10956C used in (This may be a typo for Onan P220G-I/10955C) 1990 520-8 model 41-20O801 1990 520-H model 41-20OE01

    Free

  6. 1 point

    166 downloads

    Operator manual #803451R2 or 803451 R22 4 pages 3.12MB IPL from Toro Master Parts Viewer 3 pages 202.12KB Fits C-Series tractors Drive belt 102742 replaced by 94-2501 (1/2" x 103") Spindle belt 1594 (1/2" x 107.21") Mower spindle assemblies could be K, V, Y or Z For V and Y see service bulletin 292B 4380 blade replaced by 6758 and then by 100202 3-blade kit and no longer available (Hole 5/8in.x3/4in. Double-D) Mower Rotary 1976 48in SD model 65-48MS01 1976 serial numbers that have shown up for the 65-48MS01 006329 019103 - Build date 1976 6121 April 30 Friday

    Free

  7. 1 point

    1,932 downloads

    Operator manual Illustrated parts list 6 pages 3.73MB Illustrated parts list #A-7136 Includes PSB #023 #052 #058 #060 #080 10 pages 938.48KB Engines used according to Toro Clinton B1290-1107 Kohler K91-31307A Kohler K91-31388A Electric start kit Electric starter kit model EC-35 for Clinton engine - Listed for 1958 and 1959 Electric starter kit model EK-35 for Kohler engine - Listed for 1958 and 1959 6-12 tire chains model TC-12 - Listed for 1958 and 1959 Seat cushion Foam rubber with imitation leather cover model FC-24 - Listed for 1958 and 1959 Transmission drive belt 1567 - (4L x 29" or 1/2" x 29") Details & Attachments 2 pages 107.33KB 1958 model RJ-58 1958 serial numbers that have shown up for the RJ-58 Early models used Kohler K90T-27107D equipped with a Schnacke recoil unit with a backup rope starter contained under the recoil assembly and an oil bath air filter. 00005 00251 01099 - No casting date on trans. Leather gearshift boot, large, round rear wheel hubs, "slab" hitch, replacement engine 01188 - Has round rear wheel hubs 01516 01768 01789 - No casting date on trans. Leather gearshift boot, 3-ear triangular rear wheel hubs, "slab" hitch, Clinton engine with Schnacke recoil 01797 01871 02525 03177 03501 - Located in UK 03796 - Kohler K90T-27107D with serial 364044 equipped with a Schnacke recoil unit with a backup rope starter contained under the recoil assembly and an oil bath air filter. 04883 04885 05000 05619 05714 05798 06528 - May be 16528 06749 06771 07633 07649 - Transmission J12-8 October 12, 1958 07725 08440 08612 09284 09337 - Hard to read 10163 11432 11628 - # 3521 spline gear with 10 splines changed to 11 splines in 5003 and 5010 transmissions at serial # 11628 PSB #023 11916 12221 - B3-9 trans casting date - Kohler K91 engine with Schnacke recoil 12291 14473 14713 16097 16528 - May be 06528 166x6 16868 - F4-9 trans casting date - Kohler K91 engine with Fairbanks recoil, solid pan seat without holes 18348 June 2023 18500 and lower Late 1958 units came with a Kohler K-91T-31307A equipped with a Schnacke recoil unit with a backup rope starter contained under the recoil assembly and an oil bath air filter. ------------------------------------------------------------------------------------------------------------------ Details & Attachments 2 pages 106.94KB 1959 model RJ-59 1959 serial numbers that have shown up for the RJ-59 Early 1959 units came with a Kohler K-91T-31307A equipped with a Schnacke recoil unit with a backup rope starter contained under the recoil assembly and an oil bath air filter. 18501 and up - Possible 1100 units built 20078 - Located in UK 203xx 21033 292xx 21900 - 1960 Suburban 400 began production at serial #21900 somewhere around Aug-Oct 1959. Late model RJ-59 tractors with a Kohler would have a K-91T-31388A with the Fairbanks recoil starter and paper air filter element. The 31388A was also used on the 1960 Suburban 400. K91T-31388A Serial 425251 found on RJ-59

    Free

  8. 1 point

    3,218 downloads

    Service manual K91 K141 K161 K181 K241 K301 K321 K341 137 pages 6.35MB Good copy The following engines have the spark advance camshaft K141, Suffix prior to “C” K161, Suffix prior to “J” K181, Suffix prior to “D” K241, Suffix prior to “D” 1985 312-8 model 21-12K801 has a 3 amp charging system. 1986 414-8 model 31-14K801 has battery ignition

    Free

  9. 1 point

    2,392 downloads

    35 pages 453.25KB Dated February 1997 Click on a model line in the index and it will take you to a single page showing all the spindle assemblies used on that model over the years. This may be publication #810415R2 replaced by 492-0393.

    Free

  10. 1 point

    Version 1.0.0

    311 downloads

    Replacement for: Transmission Gear Uni-Drive 1958-1982 SM HR #A-1392.pdf This is a 600 DPI scan of a very good copy of this manual. From what I can tell the content is identical to the file that includes the following on the rear cover "0482 Revision P/N 492-4004". Front cover changed only with the price going from 2.00 to 3.50. I have gone through it page by page and came to this conclusion. I have never seen an original of the aforementioned version, but I have seen two different scans of it. The words on the photos are very difficult to read on those scans. This scan is much improved in quality compared to those. And since the content appears identical (other than front and rear covers) I am uploading it for your pleasure. There are a few pages I had to scan several times to get a really good version Additional notes 6/16/2020 - after spending considerable time comparing the two, side by side, I have found a few pages of the 0482 revision that are different than this file. They are as follows: 1) Page 12. Point number 5 is missing. See service bulletin 23 for the missing info. 2) Pages 32 and 51. Does not have the "Note" mentioning that service bulletin 252 covers conversion from limited slip to 8-pinion differential. 3) Page 50. Does not have "Note" referring to service bulletins 174 and 273 discussing differential bolt changes. I would advise that all users of this manual should be aware of the information in service bulletins 55, 60, 76, 80, 252, 273, 369, 394a and 425. There are a few other service bulletins on trnasmission, but they seem to be either superseded or the information is covered in this manual. I am also very curious if owners of an original copy of the 0482 version can read the captions within photos. It is quite clear that the ortho-film exposures on that version were darker, and I suspect that even on an original, that some photo captions may be hard to read. On the earlier version the text it a bit harder to read because of the shorter exposure, but it is certainly readable, and there's no doubt this version is more useful. It is clear that the book was type set once, and that the changes are a matter of pasting in the comments and re-shooting the negatives. Edits were a LOT more work back then. Enough work in fact, that Wheel Horse increased the price from $2 to $3.50 after they made these changes! I am pleased to see folks are downloading this! My next project is to find a good original of the Sundstrand manual so I can

    Free

  11. 1 point

    Version 1.0.0

    150 downloads

    You will notice the Chicago Rawhide / SKF seal spec sheets show a WastWatcher seal. That seal may be easier to find as they have determined it is a part number that will replace many seals with the same dimensions except for width and have characteristics that meet or exceed the seal it replaces. A link to the SKF interchange http://www2.chicago-rawhide.com/popup_parts_lookup_457012.htm Toro / Wheel Horse part numbers are first on each line Seal 47-8030 Use 703333 -- Replaced by Chicago Rawhide / SKF 6105 Seal 56-2820 replaces 56-3270 & 112604 Eaton 1100 input shaft Seal 56-3130 may be -- replaced by Chicago Rawhide / SKF 7465 (Eaton part number ER92999 replaced by SKF / Chicago Rawhide 7465) [Eaton 1100 selector shaft seal] Seal 56-3270 replaced by 56-2820 Eaton 1100 input shaft Seal 83-2830 replaces 1234 -- Replaced by Chicago Rawhide / SKF 7627 Seal 83-2840 replaces 1257, 100573 -- Available only from Toro - This seal mounts over the axle tube - See photo at the top Seal 93-9807 replaces 112822 -- May be Chicago Rawhide / SKF 12407 Seal 253-44 replaces 1117, 108357, 700413, 707984 -- Replaced by Chicago Rawhide / SKF 7443 Seal 1011 -- Replaced by Chicago Rawhide / SKF 9859 Seal 1117 replaced by 253-44 -- Replaced by Chicago Rawhide / SKF 7443 Seal 1213 replaced by 100443 -- Replaced by Chicago Rawhide / SKF 11050 or National 340835 Seal 1232 replaced by 100863, See 114677, 9240 -- Replaced by Chicago Rawhide / SKF 9815 Seal 1234 replaced by 83-2830 -- Replaced by Chicago Rawhide / SKF 7627 or National 471643 Seal 1257 replaced by 83-2840 -- Available only from Toro - This seal mounts over the axle tube - See photo at the top Seal 1303 replaced by 100441 -- Replaced by Chicago Rawhide / SKF 7410 Seal 1447 replaced by 5959 -- Replaced by Chicago Rawhide / SKF 4911 Seal 1461 replaced by 100442 -- Replaced by Chicago Rawhide / SKF 6105 Seal 1482 replaced by 103118 -- Replaced by Chicago Rawhide / SKF 12330 Seal 3373 -- Replaced by Chicago Rawhide / SKF 10035 or National 204005 Seal 5958 replaced by 100607 -- Replaced by Chicago Rawhide / SKF 9878 Seal 5959 replaces 1447 -- Replaced by Chicago Rawhide / SKF 4911 Seal 6449 -- Replaced by Chicago Rawhide / SKF 11124 (Original 6449 is 1/2" wide) Seal 6663 -- Replaced by Chicago Rawhide / SKF 14810 Seal 7877 -- Replaced by Chicago Rawhide / SKF 7475 (Federal Mogul 480821 = CR 7474 , Original seal 9008000-7501 = CR 7443) Seal 7963 -- Replaced by Chicago Rawhide / SKF 6904 Seal 9230 replaced by 703333 -- Replaced by Chicago Rawhide / SKF 6105 Seal 9240 May be same as 1232, 100863 and 114677 -- Replaced by Chicago Rawhide / SKF 9815 a guess. Used on tiller with 5571 bushing Seal 100441 replaces 1303 -- Replaced by Chicago Rawhide / SKF 7410 Seal 100442 replaces 1461 -- Replaced by Chicago Rawhide / SKF 6105 (CR 11050 to replace 100442 @ SKF is wrong) Seal 100443 replaces 1213 -- Replaced by Chicago Rawhide / SKF 11050 or National 340835 Seal 100573 replaced by 83-2840 -- Available only from Toro - This seal mounts over the axle tube - See photo at the top Seal 100607 replaces 5958 -- Replaced by Chicago Rawhide / SKF 9878 Seal 100608 -- Replaced by Chicago Rawhide / SKF 6904 Seal 100863 Replaces 1232, 114677, 9240 -- Replaced by Chicago Rawhide / SKF 9815 a guess. Seal 103103 -- Replaced by Chicago Rawhide / SKF 8620 Seal 103118 replaces 1482 -- Replaced by Chicago Rawhide / SKF 12330 Seal 103269 or 103277 -- Replaced by Chicago Rawhide / SKF 10740 (National 471762 seal for 5-0900 deck thinner than originals) Seal 103461 -- Replaced by Chicago Rawhide / SKF 6763 Seal 106075 -- Replaced by Chicago Rawhide / SKF 9907 (Mower spindle original had double-lip) Seal 108357 replaced by 253-44 -- Replaced by Chicago Rawhide / SKF 7443 Seal 112604 replaced by 56-2820 Eaton 1100 input shaft Seal 112658 may be -- replaced by Chicago Rawhide / SKF 7465 (Eaton part number ER92999 replaced by SKF / Chicago Rawhide 7465) [Eaton 1100 selector shaft seal] Seal 112822 replaced by 93-9807 -- May be Chicago Rawhide / SKF 12407 Seal 114677 replaced by 100863 -- Replaced by Chicago Rawhide / SKF 9815 a guess. Seal 700413 replaced by 253-44 -- Replaced by Chicago Rawhide / SKF 7443 Seal 703333 replaces 9230 & 47-8030 -- Replaced by Chicago Rawhide / SKF 6105 Seal 707984 replaced by 253-44 -- Replaced by Chicago Rawhide / SKF 7443 Seal MW10390 -- Replaced by Chicago Rawhide / SKF 9878 Motorwheel? Used in snowthrower auger drive Seal MW10459 - 3/4" shaft Used in snowthrower auger drive

    Free

  12. 1 point

    170 downloads

    Operator manual #803967 IPL 6 pages 1.26MB Fits 1975 D-160 Automatic model 1-0651 1975 D-180 Automatic model 1-0612 1975 D-200 Automatic model 1-0631 1976 D-160 Automatic model 61-16OS01 1976 D-160 Automatic model 61-16OS02 1976 D-200 Automatic model 61-20KS01 1976 D-200 Automatic model 61-20KS02 1977 D-160 Automatic model 71-16OS01 1977 D-200 Automatic model 71-20KS01 1978 D-160 Automatic model 81-16OS01 1978 D-200 Automatic model 81-20KS01 1979 D-160 Automatic model 91-16OS01 1979 D-160 Automatic model 91-16OS02 - Not listed @ Toro and may be an invalid model number 1979 D-200 Automatic model 91-20KS01 1979 D-200 Automatic model 91-20KS02 1980 D-160 Automatic model 01-16OS01 1980 D-200 Automatic model 01-20KS00 1981 D-160 Automatic model 01-16OS01 - Not listed @ Toro 1981 D-200 Automatic model 01-20KS00 1982 D-160 Automatic model 01-16OS01 Hitch Rear Three Point 1975 model 8-5422 Hitch Rear Three Point 1976 model 8-5422 Hitch Rear Three Point 1977 model 8-5422 Hitch Rear Three Point 1978 model 8-5422 Hitch Rear Three Point 1979 model 8-5422 Hitch Rear Three Point 1980 model 8-5422 Hitch Rear Three Point 1981 model 8-5422 Hitch Rear Three Point 1982 model 8-5422

    Free

This leaderboard is set to New York/GMT-04:00


  • Newsletter

    Want to keep up to date with all our latest news and information?
    Sign Up
×
×
  • Create New...