Leaderboard

The time has come for me to part with my trusty Wheel Horse and find it a new home. I am the second owner (since 2003) and it has always been stored in a garage. I am located about 20 minutes south of Rt 80 or 15 minutes north of Rt 78 near Rt 33. 1975 C-120 Special, 8-speed (Model 1-0375, Ser. # 133357). Running (no smoke) 12 hp Tecumseh (Model HH120-120180E, rebuilt 1986). Rebuilt carb, new fuel pump, and new ignition module (in 2006). Good used replacement tank, original tank is included in the sale. Brand-new battery, fuel filter, and shutoff valve installed 5/26. The transaxle case broke a small piece off (about 1” long by 1/4” wide) on one side of the center flange and was repaired with JB Weld. Solid 42” side discharge deck (Model 5-1010) bearings replaced in 2005. Extra set of Gator mulching blades and spare hi-lift blades included. Deck works as it should and is ready to cut. 42” snow/dozer blade (Model 86-42BC01) with Rear weights, tire chains and hardware. Blade angles left and right and lifts correctly and is ready to plow. Parts: 4 NOS belts and 2 good used belts, NOS taillight lenses, used starter, used ignition module, more (see pic). 1975 C Series Owner’s manual, 1975 WH accessory catalog, 5-1010 deck manual, original HH-120 manual, updated Tecumseh HH-120 technicians handbook. Selling entire package for $325 Or Best Offer - Deck/Blade/Weights/Parts alone are worth that! Will deliver within 50 miles of zip 18064. Delivery over 50 miles is negotiable. Please PM to contact HH120_running.mp4

A nice 867. Refreshed & re-ringed K181 service motor starts & runs perfect. Fresh transmission oil & magnetic drain plug. Headlight lens a perfect original. Cigar lighter does not work. All new fuel lines. Steering wheel bushed at the dash. Hitch pin removed, cleaned & zerk added. Entire tractor gone thru. Can deliver to the Big Show or have in southern mid Michigan in April.

SOLD ; This Deck in in Like New (Original) Condition , and was removed from my 312-8 back when tractor was 1st purchased to install a side discharge - bagger system . No issues , you'd be hard presses to find 1 nicer , unless you found a NOS unit @ a dealer ! No disappointments. Note ; The factory (Mule Drive) is also Included , but is missing (1) pulley !

A-60 Electric for sale. (1975) Excellent condition Purchased NOS in 2023 Estimated 10 hours use Everything works as expected Left rear tire slow leak Includes NOS mower deck - never used (slight mouse damaged wires - taped up and functional) Includes custom wheel barrow tub cart Extra new drive belt and owners manual included

I decided not to retire yet so I’m still rebuilding I have Single cylinder Kohler K and Magnum series engines for sale k240, k301, k321, k341, M10, M12, M14 and M16. Long blocks starting at 800.00 depending on model and application. All engines are torn down to the bare block. If I don’t have your specific engine in stock let me know. I don’t cut corners with my rebuilds. All work is done to professional standards. I no longer stock or rebuild twin cylinders. I no longer stock or rebuild k91, k161 and k181 engines. Contact me via PM with any questions. Located in Mechanicsville, VA.

1973 16 HP horse with FEL & weight box (box just sandblasted & painted) Seat has a single 2 - 3" tear, taped. It's got a (42?" ) deck & mule, and the FEL stands go with it. I'm taking the new rear AGs & weights off and putting turfs back on. Recent service includes trans service (Wix filter), oil change, new plug, new choke cable, carb cleaning, and FEL fluid change. I also have a 2nd frame/body to include. Needs a headlight, I believe I have it. Driving lights on FEL. NOTE: I need time for my hand/wrist to heal before I can swap the rear wheels and tires. EDIT: I added photos of the wheels and tires that will go on the back of and a couple of partial photos of the repainted weight box. 9

Selling this 314-H with only 138 hours. PO only used it to push snow on his short drive. It never even had a belt on the pto until I mounted a deck on it last summer. No attachments included. I will drive a reasonable distance (say about 4 hours round trip). I am not going to the big show but if you can work out a way to get it there I can hold it until then. Full documentation and some extras included. I would consider a trade but you would really have to tweak my interest. Something is screwed up with loading pictures right now so only one for now. The others errored out and this one took about 15 minutes to load.

Landscaping changes made this working tractor an inefficient way to cut our lawn. Original owner had removed most WH side badging and added Ferarri stickers. Fired it up yesterday and it drove and mowed. Includes the snow thrower attachment, not pictured, which I have not attempted to install, so belt need replacement and possible missing parts may be issues if you want to chuck snow with it. Please pick up here in Aurora, IL or arrange your own transport. Might deliver locally if it makes sense. Reasonable offers entertained. Thanks to the forum members who helped me get this beastie running again!

Couple usable mowing decks for sale. The 36" is more solid and less dented up underneath than the 42", hence the price difference. We're planning a trip to North central Massachusetts and Western MA the weekend of May 9th. THIS IS SUBJECT TO CHANGE ON SHORT NOTICE. First two pics are the 36".

Repop Brinly Gard-N-Cart for Wheel Horse Serial Numbers 1-9 available $450 will ship unassembled locates Plymouth, IN for Local Pick UP call or text 574-850-1175

I have my late father's 1965 Wheelhorse 10hp model 1045 with mower deck and dozer blade that I would like to get to a good home. My Dad was working on getting it running again shortly before he died. It's going to new new rear tires and the transmission seems to be stuck after sitting so long, but it does come with some extra gears for the manual transmission along with an extra housing. The 1045 did sell today to a friend in Knoxville for $475. He has an auto body shop and loves old equipemt, so I have every confidence it will get restored. My thanks to those of you who inquired. --Dave Q

Wheel Horse part 111027, Eagle 5 Gallon Vented Gas Can w Cap & Spout. New Old Stock. Excellent shape. Local pick up or will ship to US lower 48 for actual shipping cost (estimated to be $30-$35) Check, Money Order, or Venmo accepted. Thank you, Joeww121@gmail.com

1946 pond lever steer, the first wheel horse tractor. Only 50 were made and around 25 or less known to still exist. Runs and drives as it should, has not been modified or messed with and a great example of 1 of these. Paint has been touched up years ago but still resembles the old patina look. Original rear tires , fronts were replaced about 5 years ago. Was told this sat inside the showroom for many years at the chandler Wheel Horse Dealer in South Bend Price is $10,000 and firm Located in South Haven, MI IMG_5496.mov

Very nice Wheel Horse RJ58. $850 Not perfect, but really good condition. 3 speed transmission. I haven’t used it in 4 years and it started on the first pull. Good paint, tires are showing their age. Small dents in front of hood. Includes 3 partial mower decks. I was going to make one good mower deck but other projects took precedence. Hate to see to go but it’s time for someone else to enjoy it. More photos available, just let me know. Steve, South Bend, IN

Hello all, I put my 520-8 up for sale on page 13 of the big show sale thread. Figured id add it here too to catch those not looking over there. Late to party, last minute for sale... 520-8 with good 42" s/d deck (blades nfg) Unit has 875 hours and clock works. All idiot lights and gauges work. Fresh oil and good battery. Yes it does need some light bulbs and minor doo dads. But it is still solid and very strong Tractor was used but not abused and runs great with no smoke or bad noises. Charging system works. I had plans to tear it apart and do a resto mod / rebuild it the way I would build a "520" and have come to realise I have enough 500 series parts laying around to build one using a 300/400 series as a starting platform. $1500 is my number... with genuine Wheel Horse wheel weights bring $500+ I feel this piece of Wheel Horse lore is worth it. I will haul to big show if paid in advance. Thanks Tony Andover CT (860)978-9039

This one right now is one of a kind. 6/4 thickness made from mahogany. It's old stock that came from Gibson guitars. anyone interested PM me

Original 1978 C-121. 42 in side discharge is close to new. Have brand new mule drive. Includes factory wheel weights, cigarette lighter, snow blade. All it needs is an owner. Thank you for looking

Mrs. P has decided it’s time to sell her panzer. If you don’t know much about these machines, they are absolutely stout! Kohler S/G K-181 engine runs good! The pictures should explain quite a bit, but the drive belt is is very much like a drill press. You move the belt to select which one of the three forward gears you would like to use. You then start the engine, and use the motion control lover to go forward. Reverse moves the driveshaft in, spinning it backwards. this tractor is about twice as heavy as any comparable sized Wheel Horse. Everything is super super super heavy duty. The Mopar rear end still has the factory drum brakes, and they have been modified as turn brakes by Pennsylvania panzer. The rear tires still have the little nubbies on them, somebody did a pretty good restoration to this tractor before we owned it. With the sale, it will have a brand new battery and be in running condition. It has a new coil on it, from the last time we ran it at a show. If you have any questions, please ask!

Time to thin the herd, so I'm selling two 418-A tractors. The worker in the photos below and a second for parts. The second has been disassembled to the frame and has no engine but everything else is there. Both tractors have liquid filled rear tires and there's a set of rear chains that can go too. Always been a great tractor and I'm only letting it go because I need the room. Located just north of Bel Air, MD Thanks for looking.

This is a brand new (discontinued) 106918 muffler, never been installed. No dents or scratches, never been fired. Can be marked for the big show if paid in advance.

Very original, great patina, runs perfect, new battery, tires hold air but are older. Mowed my yard several times. Comes with nice snow plow. I have the original K161 but needs a rebuild. 8HP, K181 in it now and I have an extra K181 for parts. Lots of extra tins, belt gaurds, parts ect. Need it gone. Let me know if my price is off.

Low hour 418-A for sale. Nice tractor, bought it from Spin Jim a few years ago and he really took good care of it. Starts right up and runs great. Rear weights and chains for both wheels go with it. For another $100.00 I'll throw in the 42" snow plow.

Work Horse GT-1142 for sale. Stored indoors, not original paint, w/ 42” rear discharge deck. The deck has had some repairs but is operational. Needs a battery. Motor has an oil leak which led me to park it. I last ran this tractor about 5 years ago and have not touched it since but has since been stored indoors and I had intentions to restore it someday. It has been in my family and passed down since it was bought new. I’d like to free up space now. I’m located in Mineral Springs, PA just off interstate 80 and tractor/deck would have to be picked up. If interested in further details or images please send an email and we’ll go from there. Thanks

36" Rear Discharge Mower - Rehabbed deck including Shell sand blast rust cleaning, primer paint and top coat, 3 new blades, new belt, 3 Spindles rebuilt with 6 new bearings, 2 new ouitside pulleys, new wheels, new front roller, added new center pulley reinforcement plate, 4 new lift carriage bumpers, new decals, misc new hardware. As option: pair of 2 new OEM belt/pulley covers at $40 (some minor surface blemishes ) . Deck Sold "As Is". No returns, Cash pick up Poughkeepsie NY area, no holds. First come basis. Please send message for questions or to arrange pick up.

RJ Suburban repop Showerhead muffler 3/4 formed steel not printed. $175 ea. shipped

Vintage Lighted Wheel Horse Sign. 3ft. X 6ft. This sign has be displayed in my basement for over 30 years. I bought it from a wheel Horse collector who had it displayed for years in his pole-barn. No cracks

1955 rj35 in original patina condition. Runs and drives as it should. Clinton engine was fully rebuilt and rear end gone through when I got it around 10 years ago, was driven maybe an hour in that time frame. Has rare factory cast iron hood nose weight. Hard to find tractor, especially in this shape. $4250 located in South Haven, MI

I'm offering a deal for you redsquare folks. I have an 857 with a plow and a commando 8 with a deck priced to sell at $600 for the pair. They aren't perfect by any means but they start right up and drive. The commando 8 has a transmission that was expertly rebuilt by steveasaurus!

For Sale: 1964 Wheel Horse Round Hood Tractor - Port Elgin, ON Check out this well-preserved 1964 Wheel Horse Round Hood tractor, lovingly maintained by current owner for over 25 years! Stored in a shed and covered with care, it’s in great shape and ready for a new home as my folks downsize. Its charm might just win you over! Details: Condition: Starts and runs great, mowing deck works as it should. Can share a video of it running. Highlights: Features a rare Teccy engine, hard-to-find debris screen, original horse head ignition key, linen beige wheel caps, and a factory-option seat backrest. Includes the exhaust support bracket and steering wheel center cap—details often missing on others Minor Note: Missing only the plastic rectifier cover. Location: Port Elgin, ON. Local delivery possible. A piece of history in excellent condition, a collector’s dream with all the original touches. Priced to reflect its value at $1,000 but willing to entertain offers—serious inquiries only. Message me for more pics or to arrange a call/viewing. Don’t miss out on this beauty!

312-8 and c-160 good parts

312-8, purchased 1986, but may be a 1985. Original Kohler engine, still starts and runs if if jumped. Professional valve job 40 hours ago. Needs bearing to deck PTO. Sheet metal dented and banged up. Seat has tears. Deck needs to be replaced. Would keep, but unable to do own rebuild, have new tractor. Pick up by appointment only.

I have this cool drab green 1054 for sale. I dubbed it Joe like G.I. Joe. Hydraulic pump works and transmission shifts well. Comes with original survivor seat but I have misplaced the hardware for it. Hasn’t run in 4 or 5 years, and it’s time to move on. 8 hp Tecumseh engine in it currently. local pick up only at this time. IMG_6877.mov

I have a 416-8, engine frozen, for parts. I have a B 80 which was being restored. The engine is good, just needs final connections made. There are {2} decks, both removed, one is rusted & one is bigger & in good shape. on_10:31:26.heic B 80 engine 10:31:21.heic B_80_10:31:21.heic

1986 Wheel Horse 420-LSE – All Original Condition For sale is a very nice, all-original 1986 Wheel Horse 420-LSE. The tractor currently has 474 hours and everything is operational and functioning as it should. This is number 82 of only 200 produced, making it a particularly desirable and collectible Wheel Horse. It still retains its original non-reinforced 48-inch mowing deck. The tractor is very presentable and has been well preserved in its original condition. Price: $6,500 Location Connecticut Any questions, contact me at (860) 681-3610.

I was planning on taking this 418-A to the big show in June so I asked a question in another topic conversation. Would have given me a good excuse to finally go and check it out but after asking about selling it there, got many messages with interest in it so now will just take a guess as it`s worth and try to sell in the classified to see how it goes.... Bought it 5 years ago and have done nothing to it except change oil and new gas line..... Just will never use it and need to downsize now....... I bought it from original owner who absolutely insisted the hours are original at only 70 hours!!! He was about 85 years old and had issues with health, moving and divorce so did not use.. It is not mint as he did use it as just a lawn mower so has some bumps and blemishes but its still super nice. Tires still show just a little of the nubs on them so i`m guessing he was right about the original hours. I had to steal the deck from it to use on another tractor to keep mine mowing so this wont have a deck to go with it.... I will sell for $1500........ If you are a collector of these 1987 one year only tractors, I also have a 418-8 that I bought for parts only as it didnt run. Found it was only a bad fuel pump so it runs and moves under it`s power fine. At least 3 years ago when I ran it last. Has the electric lift which works. Tractor is rough but to restore or you need parts then maybe will work for you. I would like to keep for parts but all my other ones are single cylinder, so if you have in interest in both then will both together for $1800.... Call/text Jim

I have too many projects, so here is an 875 roller. The PO added a hydro lift to the original Wheelamatic. The lift and the hydro drive work...however I am not sure putting a hydro lift on was a good idea, lifts were not an option on Wheelamatics. . I can't figure out where there would be an implement relief valve. The hose to the front of the cylinder leaks badly but the cylinder itself and control valve seem good. There is a hood but it was cut to clear a B&S engine. Steering is very sloppy and motion control needs work one rear tubeless tire goes soft. The engine is NOT included, put it on to test the hydro. I can't bring it to the show (not enough room in my truck and I can't pack like pullstart😀). However, if you live in the Northeast and are going to/from the show, I am 3 miles off I-81 (exit 211) north of Scranton

Tiller up for sale. It comes with everything needed to mount, including the mid-mount pulleys, rear axle mount, upper assembly lift including the bronze bushings and shims, cable and clevis, cable tube and 2 belts. I've owned it for 20+ years and haven't used it in the past 8 years. I stopped using it because I started using a compact tractor with a much larger width tiller. The model number has faded with time off the tag. Looking at my notes, I have written down 07-36TL01, which would make it 1980-1983.

Wheel Horse 522XI with Ark loader. 500 hours on tractor, little smoke on starting 22hp Kohler v twin runs great. New tires with Rim guard in the rears. Wheel weights are not included. Has a weight box on back full of scale weights. Loader has new pump and cylinders. Quick attatch bucket and forks. $3500 OBO cash only pickup in Medford Mn.

Put a bigger deck on your older short wheel base tractor 1054-1270. Deck shell is solid. Can bring to the big show. Adjusted price to what it cost me not looking for profit.

1" repop Showerhead muffler. Formed steel like original not 3d printed. $175 shipped

Want to be the envy of all the other garden tractor and lawn mower owners on your street?? Got a show rig that just needs some BLING? Well here’s your chance. Do you go to shows? Buy these and be prepared to have to install a shelf in your man-cave to display all your trophies for having the coolest rig ! Set of 4 Wheel Horse hubcaps for 12” and 8” wheels. Not perfect but very presentable and will spruce up a machine for sure! All 16 clips on them, just cleaned and polished up so all ya need to do is pop em on and start being the coolest guy on the block! Showed a couple of the flaws in the pics. Asking $120 for the set of 4…or best offer. Local pickup or I could ship. No idea what shipping would be, maybe they’ll fit in a prepaid post office box?

Can deliver to the big show if paid in advance, or pick up at my plow day This is one attachment I’ll probably kick myself for getting rid of, because it works so grade! Three position head, mid mount, works on long or short frame machines.

I have two C175 Auto - chassis / frames Description: 1 is a cleaned and painted frame, front axle and wheels, rear axle with Eaton 1100 Hydro, coms with a box of miscellaneous hardware from when I disassembled it for paint. Asking $99.00 O.B.O. (Note: The Lug tires in picture Do Not Come With it) 1 is a mostly complete C175 Auto minus motor and sheet metal, has the Eaton 100 Hydro, gas tank, dash, & wiring all intact. Asking $99.00 O.B.O (Note: coms as seen in pictures) If your building or maintaining a C Series Wheel Horse, or needing a rear axle or Eaton 1100 Hydro, there is tons of usable parts on these two chassis & frames. Open to reasonable Offers, Asking $99.00 Each O.B.O. Call Tim @ 1-313-460-8858

Wheel Horse C-175 Twin Automatic Tractor in Excellent Condition - $1,075 Wheel Horse C-175 Twin Automatic Tractor in Excellent Condition * Year: 1983 * Model: C-175 Automatic * Model #: 01-17KE03 * Serial #: 26603 * Motor: Kohler 17 H.P Twin Cylinder This is a Great Tractor, it has been pampered, it is in Excellent Shape. It is an Automatic Hydrostatic Drive; the deck and rear accessary hitches are hydraulically operated while sitting in the seat. It also has the optional Clevis / Sleeve Hitch for use of many Brinly Sleeve Hitch Attachments (I.E. Box Blade, Cultivator, Rake) Tractor has had many new and recent upgrades and maintenance task listed below: * New Rear Carlisle AG Tires * New Front Carlisle Rib Tires * New Seat * New Sleeve / Clevis Hitch * New Primary Belt & Idler Pully * Fresh Oil Change * New Air Filter * New Spark Plugs * New Points and Condenser / Set Ignition Timing * New Fuel Filter * New Fuel Line * New Fuel Isolation Valve at Tank * New Fuel Cap / Level Gauge * Fresh Transmission Fluid Change and Filter. This sale is for the tractor only; it is in Excellent Condition and ready to use. These tractors are very heavy-duty pieces of equipment, and a variety of new and used attachments can be purchased for your individual needs. Asking $1,075.00 O.B.O. Call Tim @ 313-460-8858 or Email: twincam_tim@yahoo.com

1995 Model 520 H, serial #73501, 20hp Onan, hydrostatic transmission (in-op), 982 hrs, 48in. mower mounts under or on front, 36in. rototiller, hydraulic lift, dual wheel option, 4 rear heavy tread tires mounted (2 of these tires new), 2 rear turf tires mounted, complete rear 40lb. wheel weight kit and mounting hardware, extra belts and accessories for all attachments. All works EXCEPT the hydrostatic transmission, it failed 03/2026. will consider some parting out.

Wheel Horse Toro 48 Inch Mower Deck: Rehabbed including rebuilt spindles with 6 new bearings - new belt - various new hardware - new decals, etc - Has perimeter shell rim reinforcement rod - and reinforced shell top plate - Pulley belt covers included - Deck model # 78360 - indicated from year 1997. Available pick up Poughkeepsie NY area - cash payment - no returns - Sold as is. No holds.

Good day, new to the forum here but have learned an incredible amount of information and resources from lurking around here since I dove deep into this hobby a few years ago, so thank you to the community for the wealth of knowledge here! Clearing out some room in the shed and basement. I have a bunch of random stuff leftover that I have accumulated. I will ship pretty much anything ground for as cheap as I can except the mower deck and hood. Available NOW: •42” mower deck and related parts - $200 •702 aluminum tank - $160 •312 tank w/ mounting brackets (one side bent) - $100 •rectangular tank (needs cleaning, no cap) - $100 •604 seat / cover (a little bubby around center) - $60 •RARE oval L/R footrests (#4200 / 4201) and bar - $125 •702 steering wheel and column (NO grip, NO lower gear) - $100 •seat springs (PAIR) - $50 •round hood style seat spring - $50 •steering sector 6471 - $35 •shroud from K181 w/ starter - $50 •spare K181 flywheel screen - $10 •flywheel #234809, all magnets and teeth intact - $150 •flywheel #231770, from starter/generator K181 - $100 •starter/generator, spins up nice and smooth, I never personally used as was a take-off to make engine pull-start. W/ regulator - $85 •stater/generator K181 shroud - $50 •starter/generator single belt cover - $75 •starter/generator bracket - $35 •starter/generator flywheel pulley / screen - $40 •Raider steering wheel, tank tray, column (will need collar under dash) - $140 •Raider lower tray - $50 •312 steering wheel / column - $125 •312 lift lever w/ sheet metal - $100 •312 front end - $55 •312 steering sector - $35 •312 brake rod - $20 •312 running boards - $50 •312 hood, faded but pretty straight - $25 Any questions message me here or shoot me a text, (631) 960-2560. More pics available. All items sold as is, FOR SALE – NO TRADES. Local pick-up available, located Long Island, NY. Will also deliver/meet half way on Long Island.

Wheel Horse Snow Blower...Late 80s Vintage...Includes Belt, Lift Tube and Flag...Everything Turns Very Free....Included is a Pair of 23x8.50x12 AG Tread Tires...Tires are Nice with No Dry Cracking...Also Cones with Tire Chains...185.00 for the Package. Thanks.