Motion lever (betwn legs) Upper Dash console

Cory. You may want to look at the parts list for the Workhorses as well. 

I might have most of what you want, and I'll let it go pretty cheap.  I have the whole steering tower including the side panels from a 417-H (or -A ?) which still has the motion control handle and lift rocker shaft and brake locking mechanism in it. I don't have the lift handle and hydraulic control, since I used that on the "hybrid" 517-H I'm building. 

I'll have to check on the lift cover plate and the horizontal between-the-legs shifter plate, but I think I have those also. It's all pretty dirty and would need cleanup, paint, and decals. 

I have a non-standard steering shaft cover tube, that looks like a previous owner made. 

Thinking I'd like $50 for all that, plus shipping, which is likely to be close to $50, so probably around $100 total. I think I have a box it will fit into but will need to look. Price is based on "as-is" condition - if I need to clean it up in single digit weather, I'd want a bit more   If you only want the upper dash and the motion handle, I'd have to remove the motion handle from the assembly so I'm not likely to drop the price much. I'd rather just sell the whole thing.

Will try to get some pictures later today if you're interested.

Here's the tower/console. I have the plate for the lift handle but don't think I have the one that goes down where the motion handle is.  I can't seem to find the steering column sleeve but it's around somewhere.

Oh, and it probably wouldn't be a big deal to remove the motion handle from the tins, if that's the only part you need from the bottom. That would save on shipping too, and I'll just scrap the rest. I forgot that the edges were broken up where the seat bracket attaches, so this would need some welding if someone wanted to use it.

Thanks dave, ill pm you. And this isnt a huge hurry, so NO removing parts in single digits!

On 1/16/2024 at 7:58 AM, davem1111 said:

I don't have the lift handle and hydraulic control

@Cee245

I've spoken to @OldWorkHorse Steve. 

Either he or I might have that lift handle and hydraulic control.  

16 hours ago, ebinmaine said:

 

@Cee245

I've spoken to @OldWorkHorse Steve. 

Either he or I might have that lift handle and hydraulic control.  

 

Hey, if @OldWorkHorse has all the parts you need and you can source it on one shipping charge, go ahead and do that. I'd like to see this gone but you should do what makes sense, and I won't be insulted at all.

@ebinmaine Eric, you don't have all the other stuff he needs, do you?  If you do, speak up. No competition here.

7 hours ago, davem1111 said:

 

Hey, if @OldWorkHorse has all the parts you need and you can source it on one shipping charge, go ahead and do that. I'd like to see this gone but you should do what makes sense, and I won't be insulted at all.

 

@ebinmaine Eric, you don't have all the other stuff he needs, do you?  If you do, speak up. No competition here.

No no. Go ahead Dave.  

Neither Steve nor I even recall what's left or who has it. 

The Motion Control was pretty worn on the parts tractor.  

I do believe that lever and hydro control is there and good though.  

Thank you guys for the help!

I will PM you, but I MAY be looking at a beat 417a for parts when weather allows. (Maybe next week) 

I'd rather just get the parts, but guy says Id have to take the whole thing. 

15 minutes ago, Cee245 said:

Thank you guys for the help!

I will PM you, but I MAY be looking at a beat 417a for parts when weather allows. (Maybe next week) 

I'd rather just get the parts, but guy says Id have to take the whole thing. 

  

 

 

Do feel free to post a thread on that if ya get it. 

There's other marketable parts there.  

Like the HOOD.