Mike G 1 #1 Posted June 18, 2022 Hi I’m new to this site, I just purchased a 1975 wheel horse D180 I can’t get my pto to properly engage the previous owner removed the shim and had the bolt tight so pto was always running. I removed pto installed shims cleaned and oiled my clutch I have it free wheeling when pto off but when I engage pto it doesn’t want to engage. Any things something I’m doing wrong. I have the manual and cleaned and installed pto back together the was the manual said and how I took it apart. Anything would help thanks. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,510 #2 Posted June 18, 2022 A later manual so you have it. 1 Share this post Link to post Share on other sites
953 nut 60,253 #4 Posted June 18, 2022 I don't own a D so can't be of much help, perhaps @pfrederi or other D owners will have some guidance. Share this post Link to post Share on other sites
