Jump to content
70.5TransAmDan

Making New, Out of Old

Recommended Posts

70.5TransAmDan

Hello Everyone, my name's Dan and I'm a wrenchaholic.

 

Um, sorry. 

That's Thursday nights meeting.

 

First, thank you to all you old farts out there like myself and don't get me wrong. There are many young, Old Farts in this world also.

I think of anyone that sees beauty deep inside an old tractor, samurai sword, and yes, even a lovely lady could qualify also.

If you're the type of person that has the patients and other qualities that's needed to bring beauty and life back to something others see as old junk, or past it's prime, you're my kind of person. 

 

To the point now.

I ran across a 1980ish Argo 8x8 Amphibious vehical for the right price the other day, FREE, and of course it has the infamous Starter/Generator system. Also, it's had many unqualified druggies, and electrical experts, work on it before me.  I'm retired union electrician and fiber optic engineer so I was once qualified but,. But,. But, what was I talking bout?

You get my point. 

So, I was wondering if anyone could possibly point me in the direction of a midg,,,,,,. Wait,. Little Person, preferably a female and  blonde, so I won't have to do so much bending over working on this darn thing and while you're at it, maybe a wiring diagram for a complete starter/generator including a three wire voltage regulator? 

 

If you have information on either of these, the help would be most appreciated. 

Really, she doesn't even have to be blonde or little.

 

That ought to show you just how willing I am to work with others.

 

;)

 

Thank all of you here for sharing your wisdom so it can be handed down for others to learn. 

 

70.5TransAmDan 

  • Like 1
  • Haha 6

Share this post


Link to post
Share on other sites
 
JPWH

See if this will help you.

Jay

Share this post


Link to post
Share on other sites
 
Maxwell-8

welcome, You got any Wheel Horses?

Share this post


Link to post
Share on other sites
 
rjg854

:WRS:  did you get what you were looking for, in post #2?

Share this post


Link to post
Share on other sites
 
953 nut

:WRS:

From one old fart and retired electrician (IBEW 43) please accept my appreciation for anyone who would rather invest their money in rusted old stuff than waste it mon greens fees at the local golf course. The manual below should get you on your way to happy amphibious motoring.

 

  • Like 2
  • Excellent 2

Share this post


Link to post
Share on other sites
 
Ed Kennell

:text-welcomeconfetti: to the :rs:  Dan.      Looks like Jay and Richard have your answers.

  • Like 1

Share this post


Link to post
Share on other sites
 
JoeM

Not to much on the Welcome Wagon but Welcome to RS anyway.

 

Something from nothing? Bush mechanic where I come from. Most valuable person!

 

 

  • Like 1

Share this post


Link to post
Share on other sites
 
EB-80/8inPA

Nice fish!

Edited by EB-80/8inPA

Share this post


Link to post
Share on other sites
 
oldlineman

From another old retired IBEW LU # 126 Journeyman Lineman fart. Welcome to the greatest source of knowledge of all things Wheelhorse and many other old fart things. Bob   

Share this post


Link to post
Share on other sites
 
WHX??

:WRS: Dan

1980 is a little new for a SG motor ain't it fellas? Repo? Most Argos had a Briggs in it. 

Not :text-imsorry: we is gonna need some :text-coolphotos: of that rig! I would love to have an Argo.

See if you get one of the motor plate.

 

Share this post


Link to post
Share on other sites
 
Pullstart

:text-welcomeconfetti:  from a not so old not so retired not so qualified Old Fart :handgestures-thumbupright:  

 

Sounds like we need some proof of said Argo!  :banana-gotpics:

  • Like 1

Share this post


Link to post
Share on other sites
 
roadapples

:text-yeahthat::WRS:

  • Like 1

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • Treepep
      By Treepep
      1975-77 Yanmar YM2000Z.  I got as a basket case and did a lot of work on it.  Tractor only but I have a new Jbar brush hog that can go with it.  954 hours.  It slips out of high gears after a bit or uphill.  I Don't know if that is an easy fix.  New starter fuel pump to tank.  All new belts hoses etc.  new front tires and tubes.  rear are original.
      Its been a couple years since new parts but covered and cared for.  Feel free to ask any questions.  I could maybe deliver to a reasonable area.  Health says its time.  I need less responsibility and maint.  These machines need to continue to move or they wont.
       
      Thanks guys.  Pictures soon.  about 40 minutes south from my place.  
    • 953 nut
      By 953 nut
      I have a few basic electrical system diagrams that are helpful in understanding how the wiring system works. They are not specific to any particular tractor and do not include safety switches. All use the 5 post ignition switches 103-991 for Magneto and 103-990 for Battery Ignition. I failed to include fuses in the Starter Generator drawing, this is an over-site and I would encourage fuses be used as shown in the other two drawings. 
      Hope this is helpful.
      Magneto Ignition system with electric start and solenoid.

      Battery powered ignition system with points, condenser, solenoid and electric start.

      Battery powered ignition with solenoid, points, condenser, Starter Generator and a mechanical voltage regulator.

      We have uncovered a shortcoming in the factory  wiring diagrams for S/G battery ignition systems with a four terminal voltage regulator. The wire from the regulator "Gen" terminal to the S/G  "A" terminal was omitted. This drawing should clear that up.

       
    • cbj75
      By cbj75
      I have a 1975 D200 Wheel Horse with front mount dozer blade, package includes Wheel Horse Dump Trailer, 48" belly mower side discharge, Wheel Horse front and rear wheel weights, turning brakes, rear PTO and 3-point to 2" receiver attachment, and Brinley twin disc harrow. Rear luggage/rack carrier, All refurbished, sandblasted and painted Ford red in 2016. Lots of extra Wheel Horse parts included.
       
      Package price $3000.00.
       
      Bryce Johnson
      102 Anglers PT
      Mc Cormick SC 29835
      913-638-6788

      IMG_1962.HEIC IMG_1965.HEIC IMG_0279.HEIC


       
    • sjoemie himself
      By sjoemie himself
      Hi all, as mentioned in another topic I visited the local harvest-show in Onstwedde again. I brought my mini International 1468 with me and got set up at around 9 in the morning. Gates opened at 10.
      It was a bit overcast and wet at the beginning but it turned out to be a nice and sunny day for the most part.
      @Pullstart requested some show pictures so here ya' go 
       
      All set up, waiting for the folks to come in and say Hi.
       

       
      This 1/3rd scale stationary thresher is built by my dads grandpa (who has passed away) and is now owned by my dad's uncle.
      He tours the country with it and displays it on several shows. It actually works and my dad's grandpa used it to harvest beans.
      The steam tractor that powers it is not my dad's uncle's but happened to be there aswell so they thought let's see if the tractor can power the thresher. Worked flawlessly.

       

       
      Besides the small tresher there's always a real one setup aswell. They thresh grain and bale the straw with the attached baler. 
      Powered by a flat belt off a vintage Hanomag tractor.

       
      Threshing machine, Dutch built out of the province of Groningen.

       
      Straw baler. The bales are manually tied and knotten.

       
      This apparatus was placed before the thresher. Not 100 percent sure what it does but it seemed it gets rid of excess chaff and other unwanted debris.

       
      Who can guess what these are and/or what they're used for?

       
      Vintage DAF truck. Dutch truck brand. This one was very nicely restored. 

       
      And another one, this one obviously for military use. Note the second axle which is free rolling. This helped it conquer dunes and tranches in rough conditions. My granddad used to operate one of these.

       
      Also no big center differential on the back axles but driveshafts coming directly from the main gearbox. The shock is the rear of the vehicle. I guess they went this route for maximum ground clearance and articulation.

       
       
       
    • Monstrosity
      By Monstrosity
      Show off what your doing from the seat of your Horse!!! Fixed up a mowing deck for the 1277 and put the plow on the C1014. Getting ready to level a topsoil pile and going down the block to mow the small park to test the mowing deck out.
×
×
  • Create New...