Crazyredhorse 295 #1 Posted May 1, 2021 (edited) Dont know how you guys feel about links but this helped me it's a real pain to change and may help someone.one thing I can add use a long wrench on pulley nut on tensioner arm to relive remove or put on belt. https://outdoorpowerinfo.com/repairs/wheel_horse_hydro_252-h_drive_belt.asp Edited May 1, 2021 by Crazyredhorse 1 Share this post Link to post Share on other sites
mike avad 38 #2 Posted November 14, 2022 so what all part's need to be remove to replace this belt. I have a Briggs&stratton on my 525-H wheelhorse 1 Share this post Link to post Share on other sites
peter lena 8,038 #3 Posted November 18, 2022 @Crazyredhorse / @mike avad would also take advantage of the opportunity to service related idler pulleys and linkage areas , would re grease those pulleys , lubricate all those dry movement spots , penetrating lubricant , also red spray grease . every related movement point has to be free and easily moving . ironically those pictures are you problem and answer , belt tension point is probably your belt access removal / install point . never done one , but easy total view access is your best set up . make it better as you go . pete 1 Share this post Link to post Share on other sites
mike avad 38 #4 Posted December 10, 2022 thank you all for the help and reply's 1 Share this post Link to post Share on other sites