mattg 2 #1 Posted April 25, 2021 Hello, New to this site, looks like a great place for information. I have a 414-8 with the factory rims on and 23, 8.50 x 12 tires. will 23, 10.50 fit on these rims? Looking to put ag tires on Thanks for any help! Matt 2 Share this post Link to post Share on other sites
cschannuth 3,817 #2 Posted April 25, 2021 (edited) They will fit, especially if you go with the economical Deestones. They run a little small. Welcome to Red Square. If you can't find the help you need here it probably doesn't exist. Edited April 25, 2021 by cschannuth 1 Share this post Link to post Share on other sites
Sparky-(Admin) 23,277 #3 Posted April 25, 2021 If you go with a brand other than Deestone you may find that the 10.5 ags “balloon” and you don’t get a nice flat tread on the ground. I think your rims are 7” wide, I would try to find the 8.5” wide rims. 1 Share this post Link to post Share on other sites
WheelHorse520H 708 #4 Posted April 25, 2021 To red square @mattg. 37 minutes ago, cschannuth said: If you can't find the help you need here it probably doesn't exist. Also, @cschannuth is right these guys know everything. 1 Share this post Link to post Share on other sites
Jeff-C175 7,206 #6 Posted April 26, 2021 3 hours ago, Sparky said: If you go with a brand other than Deestone you may find that the 10.5 ags “balloon” and you don’t get a nice flat tread on the ground. I think your rims are 7” wide, I would try to find the 8.5” wide rims. Share this post Link to post Share on other sites
mattg 2 #7 Posted April 27, 2021 thanks everyone! id really like to go with the Carlisle tru tracs, always heard good things about them, seems as though a lot of pullers use these. So maybe ill get a set of 8.5 rims to put them on Share this post Link to post Share on other sites
