oil change

[Tractorhead 8,577]

   To   

 

and thank you for your Service.

 

Think it‘s too late to jump out of this Train, so Welcome on Board.

I don’t know if you didn’t heard that before - Wheelhorses tend to Herd..

 

btw nice Rig.

👍

[oliver2-44 8,837]

Thats a nice "1st one"   You will soon have many more. 

Thank You for your Service. 

[cat man 137]

you are welcome and thank you on the service part and for those wanting to know why i go by cat man, in the 90s i was with the nascar cup team 96 cup car with david green and then 1 year with the 22 cup car with ward burton it was a great time in my life i got to slap dale sr. hand on pit road at daytona in 1998 when he won the 500

[Tractorhead 8,577]

17 minutes ago, cat man said:

you are welcome and thank you on the service part and for those wanting to know why i go by cat man, in the 90s i was with the nascar cup team 96 cup car with david green and then 1 year with the 22 cup car with ward burton it was a great time in my life i got to slap dale sr. hand on pit road at daytona in 1998 when he won the 500

 

When i see the shirt, it clears all to me

Yellow blooded - huh

[cat man 137]

well when i was on the race team yes but im red blooded now lol

[ebinmaine 62,978]

@cat man I got that oil from Pro parts direct. Com

 

Big discount if bought by the case of 12. 

 

I'll PM you the link. 

 

 

 

[cat man 137]

ok i got my motor oil drained ok but i cant tell where to drain the automatic trans on my C-120 can i get a pic from someone that shows me the right drain plug thanks

[cat man 137]

i got my motor oil drained but im not sure where the drain plug is on my automatic trans is can i get a pic of a c-120 automatic trans on where it is thanks

[pfrederi 17,129]

Bottom of tranny. You need  a 1/4" Allen wrench.  Make sure you clean the crud out of the hole first

 

 

[lynnmor 6,762]

41 minutes ago, cat man said:

i got my motor oil drained but im not sure where the drain plug is on my automatic trans is can i get a pic of a c-120 automatic trans on where it is thanks

We could call in @krystolo who just graduated and now can be on the advisory panel. 

[cat man 137]

well i found the drain plug and got it drained and the filter changed where do i fill the trans back up at is there a plug or do i use the dip stick hole

[cat man 137]

30 minutes ago, pfrederi said:

Bottom of tranny. You need  a 1/4" Allen wrench.  Make sure you clean the crud out of the hole first

 

 

 

[cat man 137]

where do i fill it back up at is there a plug or put it in the dip stick hole?

[ebinmaine 62,978]

12 minutes ago, cat man said:

dip stick hole

That's the one. 

 

Just take it slow.....

[Handy Don 10,567]

58 minutes ago, ebinmaine said:

That's the one. 

 

Just take it slow.....

REAL slow. The first two or three or almost four quarts go in easy. After that, the level gets close to the bottom of the dipstick tube and the air has trouble getting out. If that happens, it "burps" oil all over as an air bubble comes up the tube. Be ready with cardboard, newspapers, or some other protection under the tractor.

Did this just last weekend and put the last two quarts in with a funnel going into a ¼" tub that I put down the dipstick hole. Propped up the funnel and every 10 minutes or so I put another 8 oz in the funnel then when off to do other tasks. Only two burps.

[krystolo 497]

1 hour ago, lynnmor said:

We could call in @krystolo who just graduated and now can be on the advisory panel. 

Haha! I sure did!!

I even jacked up the front to get the last drops out. 
 

Filling it back up was a challenge, though. Kept burping and my “extension tube” piece of rolled up paper didn’t work so great. Going to add the last three quarts tomorrow. Kitty litter all over my driveway. Lol

[Jeff-C175 7,195]

11 hours ago, Handy Don said:

REAL slow.

 

And do NOT get directly over the funnel to look down inside to see what the hold up is!  At the exact moment that you do it will 'burp' and regurgitate a blob of oil right into your eye!  Don't ask how I know this!