Skipper 1,789 #1 Posted March 10, 2021 (edited) Looking for affordable bearings. Anyone have some SKF or *** or so numbers to go from? Does 6308-C3 sound about right? Thanks fellas Edited March 10, 2021 by Skipper 1 Share this post Link to post Share on other sites
WHX?? 51,733 #2 Posted March 11, 2021 (edited) @richmondred01 might know. A quick search tells me tthe same ones used in M10 thru M16 and a couple of the K's. Fleabay crawls with them about 20 USD a piece Tom. Most likely after markets. You workin on something we oughta know about? Edited March 11, 2021 by WHX24 1 Share this post Link to post Share on other sites
richmondred01 2,307 #3 Posted March 11, 2021 (edited) Kohler 235376S BEARING BALL k221-k341 Edited March 11, 2021 by richmondred01 2 Share this post Link to post Share on other sites
Achto 29,394 #4 Posted March 11, 2021 3 hours ago, Skipper said: Does 6308-C3 sound about right? If that is the Timken number on the side of the bearing then you will find a wide array of prices. Example - https://www.qualitybearingsonline.com/6308-c3-timken-deep-groove-radial-ball-bearings-40x90x23mm/?setCurrencyId=2&gclid=Cj0KCQiA-aGCBhCwARIsAHDl5x9d5d5T4EG8HFo2ddb_Kdjzl8lBQiYyWgow9oXWbu1yW-5u0AmM-yIaAkT1EALw_wcB 1 Share this post Link to post Share on other sites
Skipper 1,789 #5 Posted March 11, 2021 (edited) 15 hours ago, WHX24 said: @richmondred01 might know. A quick search tells me tthe same ones used in M10 thru M16 and a couple of the K's. Fleabay crawls with them about 20 USD a piece Tom. Most likely after markets. You workin on something we oughta know about? Yeah i know, just tried to find a reliable source, without a middle man. And the 150$+ each for the OE's are just too much for a simple bearing imo. A full rebuild ends in just waaaaay too much money that way. I found quality brand name 6308-C3's at about 18 buck each. That's quite another price than OE. Hope they fit. Not up to much exciting really. Just had a few duds sitting around, and a friend with too much time on his hands, so he fixes, and I provide the parts. Then splitting the winnings if any. Off the shelves, out the door. Spring cleaning before the season starts in a little while Edited March 11, 2021 by Skipper 1 1 Share this post Link to post Share on other sites
The Tuul Crib 7,339 #6 Posted March 11, 2021 Check with Norman at lsavetractors. 1 Share this post Link to post Share on other sites
