Jump to content
Travas

Workhorse gt 1100 lazy restoration

By Travas, in Wheel Horse Electrical

Recommended Posts

Travas    13

Travas
Posted

Need some help with setting up electrical to the engine. I got this one wire I don't know where it goes! I thought it went to the starter but it doesn't fit. A grounding wire went there I believe. Any ideas or manuals? And a front tire as well

16092914969998482583986970659092.jpg

16092915676925934080700094722983.jpg

Share this post

Link to post
Share on other sites
 

Travas    13

Travas
Posted

It does run but when it ran It had no exhaust pipe and wasn't in the engine. Just "pull" started it with twine.

Share this post

Link to post
Share on other sites
 

oliver2-44    9,624

oliver2-44
Posted

:text-welcomeconfetti:

Some of the workhorse pro's will be along shortly.

Share this post

Link to post
Share on other sites
 

gwest_ca-(File Mod)    11,019

gwest_ca
Posted

Welcome to the forum.

Click on the picture in the link for one of the wiring.

You can download the same one.

The black wire with a blue stripe may be considered a blue wire.

It may be a blue wire to the magneto. Do not allow any battery voltage into it if it is because that will burn up the ignition coil. The blue wire grounds the coil to shut the ignition off. If the key now shuts the engine off it is not the ignition wire - it already goes to the ignition switch.

  • Like 1

Share this post

Link to post
Share on other sites
 

Achto    27,482

Achto
Posted

:WRS:

 

Can you tell us where the other end of that wire is attached to? That may help determine where it should go.

  • Like 1

Share this post

Link to post
Share on other sites
 

SylvanLakeWH    25,443

SylvanLakeWH
Posted

:text-welcomeconfetti:

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • BrianKoch
      What am I doing wrong? ‘68 Charger 12
      By BrianKoch
      Hello gentleman, 
       
      Problem: will not crank on its own, will crank with jump box—but still not fire
       
      Recent things I did prior to this issue: cleaned fuel filter, replaced battery cables, replaced cable from ignition to starter
       
      I have my test light out and am probing around. 
       
      There is no power at ignition/magneto wire or the ignition/starter wire
       
      There is power everywhere else






    • Jeff-C175
      Tractor 1989 416-8 Wiring Detailed Rev'd.pdf
      By Jeff-C175
      Detailed wiring from the Demystification Guide #492-4509
      4 pages 1.4MB Color
      p7-67 to p7-70
       
      Onan powered
       
      1989 416-8 model 31-16O801
    • trident
      Electric PTO
      By trident
      Need some help. My 800 Special has an electric PTO. It is not working. Checked Ohms - nothing. My questions are 1) how does the PTO come off and 2) can they be rebuilt? I took the bolt out that I thought holds it on but no luck. Must be something more?
    • grasscuts
      1993 520h back firing
      By grasscuts
      Hi, here's what happened. I changed out 9 pin moles plug...had issues tracter quit running and changed the plugs while I was at it....got plugs from auto store cross reference to ngk they said it was the same heat range and I check electrod  length with calipers ,same...tracter started right up and ran great for about 10 min. And started back firing and quit.....going to check it out tonite anybody have an idea?    
    • jakester
      unknown electrical componant
      By jakester
      hello all I'm a new owner of a 312-8 tractor, have starting problems, came across a very small, what I believe is a relay between the battery and the dash,its about 2/3rd size of a cube of sugar silver on the outside blue on top with a hole bout the size of a pea, theres 6 pins with wires connected to it on the bottom do not know what this is any thoughts? I cannot determine the exact year of this machine for there is no tag anywhere only tag on engine kohler magnum md #m12s   ser# 170370459  spec#  471527  I figure its mid to late 80s to early 90s. of all the wiring diagrams ive looked at it does not show any thing like what I just described also can that little circuit board be removed that's like a test point for idiot lights? any help would be appreciated  jeff
×
×
  • Create New...