TJ5208 1,841 #1 Posted December 13, 2020 Here's the exhaust is now off some ideas on 30 inch inch exhaust stack pipes Share this post Link to post Share on other sites
8ntruck 7,877 #2 Posted December 13, 2020 @pullstart converted some stainless steel shower grab handles into stacks. Others have talked about converting aluminum baseball bats. Whatever you end up with, you should consider some sort of support for the 30" stack. With all of the vibration the engine has, just mounting the stack to the exhaust port leaves the possibility of a fatigue crack forming somewhere in the stack. Good luck and have fun with the project. Share this post Link to post Share on other sites
Mickwhitt 5,138 #3 Posted December 13, 2020 I put a stack on my C-125 Fabricated from stainless steel tube with a flexible coupling to the exhaust port. Sounds good and looks fabulous with a flapper on top. Share this post Link to post Share on other sites
ebinmaine 72,988 #4 Posted December 13, 2020 Agreed with both above. Support will be important considering a tall stack. On my Cinnamon Horse I used a custom muffler, self built support, and a chrome bathroom drain pipe cut off at the right angle to get the direction I wanted. Zoom in on the tractor in the right. 1 Share this post Link to post Share on other sites
