Vinylguy 4,692 #1 Posted June 11, 2020 The good news first. Got a new carb and got the 312-H running great. Reinstalled the air cleaner and shroud then closed the hood and fired it right up at quarter throttle no choke. Now the bad. After about 30 seconds I hear a bang and out flies this piece of dics from the right side. Looks like pressure plate for mule but I cant see where it came from nor any broken parts??? Also found a leak in the front right tire sidewall so off to Tractor supply to get a new tire 1 10 1 Share this post Link to post Share on other sites
ebinmaine 73,004 #2 Posted June 11, 2020 I agree that that looks like your PTO clutch plate. Maybe disassemble that and see what's going on in there? 1 Share this post Link to post Share on other sites
rmaynard 16,372 #3 Posted June 11, 2020 You sure that piece didn't hit the tire and cut it? Looks like a piece of the PTO to me. 1 Share this post Link to post Share on other sites
Vinylguy 4,692 #4 Posted June 11, 2020 Going to get the right front wheel back on and get it to the lake. Have better tools in the shed there and will check out the pto assembly. Thanks 1 Share this post Link to post Share on other sites
squonk 43,944 #5 Posted June 11, 2020 The Wheel Horse gods have been down right ornery lately with the show canceled’ 1 2 1 Share this post Link to post Share on other sites
Pullstart 67,062 #6 Posted June 11, 2020 You can do it Terry! 1 1 Share this post Link to post Share on other sites
76c12091520h 3,926 #7 Posted June 11, 2020 I owe you one Terry, let me know if I can help. 1 2 Share this post Link to post Share on other sites
Tractorhead 9,212 #8 Posted June 11, 2020 Hope you find the problem and the parts you needed quick. Share this post Link to post Share on other sites
SylvanLakeWH 28,605 #9 Posted June 11, 2020 Maybe use it for a backing for one of your custom decals... put it on your shop wall... Something like: "If you think you got problems..." 1 1 Share this post Link to post Share on other sites
Lee1977 7,224 #10 Posted June 11, 2020 My C-120 hucked the hold disk out in a lot of little pieces. That was back when they were riveted on. Share this post Link to post Share on other sites
PeacemakerJack 10,743 #11 Posted June 11, 2020 That stinks Terry...never seems to fail—when you get one thing fixed, something else gives grief! Hopefully it will be a simple fix without any more unusual challenges. 🤞🏻 Share this post Link to post Share on other sites
Lee1977 7,224 #12 Posted June 12, 2020 4 hours ago, PeacemakerJack said: That stinks Terry...never seems to fail—when you get one thing fixed, something else gives grief! Hopefully it will be a simple fix without any more unusual challenges. 🤞🏻 That is why you always need a back-up tractor and possiblyly a back-up for the back-up. I hate to be working on equipment when I really need to be getting the job done. 1 Share this post Link to post Share on other sites
scWHhauler 96 #13 Posted June 13, 2020 I don't know about the Wheel Horse gods being angry but they led me to find my C-141 😀 2 1 Share this post Link to post Share on other sites
c-series don 10,154 #14 Posted June 13, 2020 Can we see more pictures of that C-141? Those 78-79 C- Series are my favorite! 1 Share this post Link to post Share on other sites
