My_horse 106 #9526 Posted 18 hours ago 21 hours ago, 76c12091520h said: Moved some stuff out of the garage and took a sneak peak picture of a soon to be completed project: very nice! Could you tell me what type of seat that is? Looking for a new seat for my 314-8. Share this post Link to post Share on other sites
My_horse 106 #9527 Posted 18 hours ago Worked on my trailer yesterday. Bought it in 2019 and the powder coat immediately started peeling off just the fenders. So I scraped all the coating off, sanded primed and painted each one. checked bearings today and had to snug them up some. Aired up the tires and lubed the moving parts of the hitch, jack, and gate. Had to relocate the license plate because I stepped on the back of the trailer and the front came up, back went down and snapped my license plate holder off the taillight. 😡. Now it’s mounted to the ramp sans light. Today I had to mow, waited a bit for grass to dry. While I waited I changed the mower drive belt on my Timecutter HD. There were 3 cracks in the old one that I noticed on spring maintenance. Very easy to do, just needed my spring hook to release the tension spring. Now I don’t have a belt squeak when turning the pto on. Tension spring has more tension on it too. 3 Share this post Link to post Share on other sites
76c12091520h 4,144 #9528 Posted 16 hours ago 2 hours ago, My_horse said: very nice! Could you tell me what type of seat that is? Looking for a new seat for my 314-8. I have those seats listed in my ( K & B Horse Parts ) vendor section of the classifieds.....check your bolt pattern 1 Share this post Link to post Share on other sites
My_horse 106 #9529 Posted 15 hours ago 56 minutes ago, 76c12091520h said: I have those seats listed in my ( K & B Horse Parts ) vendor section of the classifieds.....check your bolt pattern Crap. I have the 5 3/4”w x 7 7/8”d size of the later one. Nice looking seat. Share this post Link to post Share on other sites
My_horse 106 #9530 Posted 15 hours ago Copied from notes and the size went nuts. 1 Share this post Link to post Share on other sites
cafoose 3,709 #9531 Posted 14 hours ago I got a seat from @76c12091520h a couple years ago at the Big Show and it was easy to modify to fit. Here's the link: 3 Share this post Link to post Share on other sites
ebinmaine 78,516 #9532 Posted 7 hours ago 10 hours ago, My_horse said: license plate holder off the taillight. 😡. Now it’s mounted to the ramp sans light Just keep in mind that's technically incorrect, at least here in Maine & Massachusetts. The plate must be illuminated. 2 Share this post Link to post Share on other sites
953 nut 65,650 #9533 Posted 5 hours ago 1 hour ago, ebinmaine said: The plate must be illuminated. Headlights from the approaching patrol car will illuminate it. 1 2 1 Share this post Link to post Share on other sites
My_horse 106 #9534 Posted 3 hours ago 3 hours ago, ebinmaine said: Just keep in mind that's technically incorrect, at least here in Maine & Massachusetts. The plate must be illuminated. I’m sure it is here in PA too. I don’t use the trailer at night, so I should be ok. I can wire up a new light if I see the need arise. 1 Share this post Link to post Share on other sites
My_horse 106 #9535 Posted 3 hours ago (edited) 11 hours ago, cafoose said: I got a seat from @76c12091520h a couple years ago at the Big Show and it was easy to modify to fit. Here's the link: My seat mount is different than that. Maybe I could adapt an earlier seat mount and then use his seat? Edited 3 hours ago by My_horse Add pics 1 Share this post Link to post Share on other sites
Ed Kennell 45,889 #9536 Posted just now Made another blackberry / rhubarb pie. Much better than the strawberry / rhubarb. Share this post Link to post Share on other sites
