Jump to content
Tractor boy

1056 Wiring.

Recommended Posts

Tractor boy

Started working on the wiring on my 1056. Any ideas where i can find the wiring diagram? I can’t seem to find one. 
Thanks. 

Share this post


Link to post
Share on other sites
 
ebinmaine

You should have a regular battery ignition with points and a starter / generator. If that's the case, check the third diagram down.

 

 

 

 

  • Like 1

Share this post


Link to post
Share on other sites
 
gwest_ca

Garry

  • Like 1

Share this post


Link to post
Share on other sites
 
Tractor boy

My tractor doesn’t have a soloind? Positive cable goes from the battery to the key switch 

Share this post


Link to post
Share on other sites
 
pfrederi

Pretty simple wiring system.  You do NOT have a solenoid. Note the blue line in the picture.  There is a wire that doesn't show up on the WH diagrams as it is a Kohler installation.  There is a terminal on the bottom of your regulator and a wire runs from it to the "A" terminal on the generator.

  Edit the wires from battery to switch and switch to generator "A" terminal should be 6 ga or larger.  rest can be 14.

 

wire1.jpg

Edited by pfrederi
  • Excellent 2

Share this post


Link to post
Share on other sites
 
Tractor boy

So the green would be a negative correct?along with the black wire coming off the starter 

Share this post


Link to post
Share on other sites
 
pfrederi

Green goes from the battery + terminal to the "BAT" terminal on your regulator

Share this post


Link to post
Share on other sites
 
Tractor boy

I’m a idiot. Regulator is the box ontop of the starter?

Share this post


Link to post
Share on other sites
 
pfrederi

The regulator has 4 terminals. 3 on the top  L  BAT  F and one on the bottom A or sometimes GEN

 

 

Genny Has two terminal one usually stamped with and A and thee other is F Field/.

Edited by pfrederi

Share this post


Link to post
Share on other sites
 
pfrederi

Yes the regulator is the box on top of the Generator

Share this post


Link to post
Share on other sites
 
953 nut

This diagram is very much like your wiring, it was done to allow people to see the relationship of different electrical components to one another. You don't have lights on a 1056 but the cigarette lighter will be connected to the "L" terminal.

image.jpeg

  • Like 2

Share this post


Link to post
Share on other sites
 
The Tuul Crib
13 minutes ago, Tractor boy said:

I’m a idiot

No one here is an idiot ! We have and 

all are still learning!! You never gain 

knowledge unless you ask questions!

 

  • Heart 2

Share this post


Link to post
Share on other sites
 
Tractor boy
41 minutes ago, pfrederi said:

Pretty simple wiring system.  You do NOT have a solenoid. Note the blue line in the picture.  There is a wire that doesn't show up on the WH diagrams as it is a Kohler installation.  There is a terminal on the bottom of your regulator and a wire runs from it to the "A" terminal on the generator.

  Edit the wires from battery to switch and switch to generator "A" terminal should be 6 ga or larger.  rest can be 14.

 

wire1.jpg

Do you have a clearer picture of the key switch?

Share this post


Link to post
Share on other sites
 
ebinmaine
5 minutes ago, Tractor boy said:

Do you have a clearer picture of the key switch?

Should only be 3 terminals I think..

 

Share this post


Link to post
Share on other sites
 
ebinmaine
27 minutes ago, The Tool Crib said:

No one here is an idiot !

 

You speak for yourself mister man.

I'll be an idiot all day everyday.

 

:ROTF:

  • Haha 2

Share this post


Link to post
Share on other sites
 
gwest_ca

Click on the picture

Garry

Share this post


Link to post
Share on other sites
 
pfrederi

B S and I  only 3 terminals. B goes to Battery positive (heavy Wire)  S goes to "A" terminal on the generator (heavy Wire) "I" Ign goes to coil.

  • Like 1
  • Excellent 1

Share this post


Link to post
Share on other sites
 
Tractor boy
5 minutes ago, pfrederi said:

B S and I  only 3 terminals. B goes to Battery positive (heavy Wire)  S goes to "A" terminal on the generator (heavy Wire) "I" Ign goes to coil.

A Being first? Like A B C?

Share this post


Link to post
Share on other sites
 
pfrederi

 A = armature on the generator and bottom of the regulator.   B= Battery    F = Field (one on the regulator one on the generator.) S Starter goes from switch to "A" on the generator.

Edited by pfrederi

Share this post


Link to post
Share on other sites
 
953 nut

Did you look at the drawing in post 11?

Share this post


Link to post
Share on other sites
 
Tractor boy
1 minute ago, 953 nut said:

Did you look at the drawing in post 11?

Ya, question is what terminal am I pulling off of the regulator. 

Share this post


Link to post
Share on other sites
 
Tractor boy

The one all the way to the left is ground, middle or right is what I’m figuring out 

1B75B91C-B388-4A65-8F22-D370F5F9B2CE.jpeg

Share this post


Link to post
Share on other sites
 
953 nut

The body of the regulator is grounded. The one  labeled "F" will connect to the S/G terminal labeled "F". The one marked "L" will go to the cigarette lighter.

image.jpeg

Edited by 953 nut
fat finger

Share this post


Link to post
Share on other sites
 
pfrederi

From your picture Last terminal is F it should go to F on the generator ( green marking)  the center one is Bat (red) it should go to + terminal on your battery.  the last one yellow is irrelevant unless you are a smoker.

 

 

 

Inked1B75B91C-B388-4A65-8F22-D370F5F9B2CE.jpeg.a9b983c4cb66264e05cc9900ed103107_LI.jpg

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...