c-series don 12,674 #3451 Posted November 9 Shuffling a few tractors around before winter sets in, the C-101, 418-C and 418-8 were in my enclosed trailer. So I took them out for a quick check up! 3 7 Share this post Link to post Share on other sites
Ed Kennell 47,835 #3452 Posted November 9 That C-101 slept in my barn for a couple months. 5 2 Share this post Link to post Share on other sites
c-series don 12,674 #3453 Posted November 9 (edited) It certainly did @Ed Kennell !! I thank you again for helping me acquire that beautiful tractor! I still think it has probably not but a few hours on it. Paint still on the muffler and nubs on the tires! You can tell when you drive it, it feels like brand new. It will spend the winter in my warm basement with some other C-Series. Edited November 9 by c-series don 4 1 Share this post Link to post Share on other sites
Ed Kennell 47,835 #3454 Posted November 9 2 minutes ago, c-series don said: It certainly did @Ed Kennell !! I thank you again for helping me acquire that beautiful tractor! I still think it has probably not but a few hours on it. Paint still on the muffler and **** on the tires! You can tell when you drive it, it feels like brand new. It will spend the winter in my warm basement with some other C-Series. I'm glad I could take part in getting this gem to the home it deserves. 1 1 2 Share this post Link to post Share on other sites
Sparky-(Admin) 26,712 #3455 Posted November 14 Reassembled! 11 Share this post Link to post Share on other sites
Bar Nuthin 3,542 #3456 Posted Sunday at 06:07 PM (edited) Back in the game after a few repairs/upgrades. Gas tank stripped and sealed. Wiring and ammeter replaced after the regulator shorted out against the gas tank - turns out the 31.5" belt is too long for this particular tractor, using every last inch of adjustment to get the belt tight - which put it dangerously close to the gas tank. Probably the reason I had so much difficulty adjusting the belt guard. Replaced it with a 31" belt and now it is right in the middle of the adjustment range. The short melted some wiring and zapped the 20-amp ammeter. I saved the "bouncy" original ammeter (15-amp) and put it back in. Running well and charging as it should! Also adjusted the shifter set screw an got rid of all the slop in the shifter lever. I also installed a new Cole Hersee ignition switch Edited Sunday at 06:14 PM by Bar Nuthin keep remembering more **** XD 9 Share this post Link to post Share on other sites
JCM 11,457 #3457 Posted Sunday at 11:27 PM Recent purchase of the 420- LSE # 2 headed out back to do some firewood hauling work today. 2 7 Share this post Link to post Share on other sites
ebinmaine 81,178 #3458 Posted Sunday at 11:54 PM 26 minutes ago, JCM said: 420- LSE # 2 You got a name fer that one yet bub? Share this post Link to post Share on other sites
JCM 11,457 #3459 Posted Monday at 12:49 AM I have never named a tractor. Only the LSE as # 1 and # 2. 3 Share this post Link to post Share on other sites
MainelyWheelhorse 3,202 #3460 Posted Monday at 01:27 AM 1 hour ago, ebinmaine said: You got a name fer that one yet bub? I have names for mine usually if I’m working on it and it goes sideways….😁 6 Share this post Link to post Share on other sites
Bar Nuthin 3,542 #3461 Posted Monday at 02:56 AM (edited) 1 hour ago, MainelyWheelhorse said: I have names for mine usually if I’m working on it and it goes sideways….😁 Quite unintentional, but I've named all of my tractors "One". Which One, This One, That One, or The Other One? Edited Monday at 02:58 AM by Bar Nuthin 1 1 4 Share this post Link to post Share on other sites
PeacemakerJack 11,085 #3462 Posted 3 hours ago Got to plow cousin Paul’s garden with the old “dark horse”🐎 he wanted to double the size from last year! ✅ He’s much more like a brother than a cousin! Great times😎🙌🏻 4 1 Share this post Link to post Share on other sites