Bigtrx34 321 #1 Posted March 21, 2020 Can some one share a pic of the throttle linkage and spring from a p220 series. I was able to fire my motor for the first time last night but I have no throttle response and after further looking my butterfly does not respond to the cable at all. Want to make sure I have it hooked up right before I takedown the top end of the motor again. Share this post Link to post Share on other sites
lynnmor 7,819 #2 Posted March 21, 2020 Download this file: Onan manual On page 7-6, look at the side pull drawing. The throttle plate responds to the governor, not the throttle cable. The cable only adjusts the pull. 1 Share this post Link to post Share on other sites
Bigtrx34 321 #3 Posted March 21, 2020 43 minutes ago, lynnmor said: Download this file: Onan manual On page 7-6, look at the side pull drawing. The throttle plate responds to the governor, not the throttle cable. The cable only adjusts the pull. Perfect Thank you this is just what I needed Share this post Link to post Share on other sites
daveoman1966 3,839 #4 Posted March 21, 2020 These help... from a 520-H. Share this post Link to post Share on other sites
