gt-14 No spark

[krohs nest 29]

The trigger is bad. Replacement is costly.

Looking at Brian Miller's replacement kit. Any comments.

[pfrederi 17,114]

Just did the swap on my GT14.  easy enough to do.  not familiar with his kit.  you need points, points cover and gasket, plunger 4741104-s, coil and condenser.  will need to get a new ignition switch.

[ebinmaine 62,893]

 

 

All the above parts in Paul's list can be purchased separately or you could call one of our vendors. A - Z Tractor.

 

[cafoose 3,135]

Read through this thread and click on my links in post #6 for more info:

 

 

[953 nut 51,406]

6 hours ago, krohs nest said:

Brian Miller's replacement kit.

Brian has some great stuff on his web site and the convenience of one stop shopping can't be beat. The GT-14 is a great machine,    

[krohs nest 29]

6 hours ago, 953 nut said:

Brian has some great stuff on his web site and the convenience of one stop shopping can't be beat. The GT-14 is a great machine,    

Great, thank you for your reply. Would like to keep the machine as close to original as possible,that is breakerless and solid stare.

[pfrederi 17,114]

9 hours ago, krohs nest said:

Great, thank you for your reply. Would like to keep the machine as close to original as possible,that is breakerless and solid stare.

 

Did you test the trigger?  If you want to stay original it will cost you....

[Pullstart 59,454]

@krohs nest welcome from the other side of the mitten!

[krohs nest 29]

On 3/14/2020 at 12:23 PM, ebinmaine said:

 

 

All the above parts in Paul's list can be purchased separately or you could call one of our vendors. A - Z Tractor.

 

 

On 3/14/2020 at 1:02 PM, cafoose said:

Read through this thread and click on my links in post #6 for more info:

 

 

 

On 3/15/2020 at 9:28 AM, pfrederi said:

 

Did you test the trigger?  If you want to stay original it will cost you....

 

[krohs nest 29]

Finally got a chance to recheck the trigger. Still checked  bad. Checked the coil it is OK. You are right it would be costly to keep original.

Will probably use Brian's equipment,

Going to rewire the machine. What size wire, 14 or 16 or a combination.

Thanks for your help.

[953 nut 51,406]

8 hours ago, krohs nest said:

Going to rewire the machine. What size wire, 14 or 16 or a combination.

You will find that 14 gauge wire works well for everything. The connectors on your wiring system are Delphi-Packard GM 56 Series. Yuo can find them at a GOOD auto parts store or on         Don't use the junk connectors you find at the hardware store, they will come apart on you while you are driving.

[Howie 882]

     Those are what I use and I bought a good crimp tool also.